Journal Paper

1. "Tensile behavior of AZ91 alloy containing silver and under different casting conditions"
   Pouria Kamaii : First author, Mehdi Khorasanian : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
   scientific journal of new materials, pp.60-80, 2022
2. "Evaluation of High Temperature Oxidation Behavior and Adhesion of Heat-Resistant Ferritic Steel Claddings on Austenitic Stainless Steel Produced by GTAW Process"
   فرج اله هدايت : First author, Reza Dehmalaie : second author, Mehdi Khorasanian : Third author, behnam lotfi : Fourth author
   Journal of Corrosion Sciences and Engineering, pp.35-51, 2021
3. "Microstructure and corrosion behavior of Ti-10Cu fabricated by selective laser melting"
   جادر مالحي زاده : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Mehdi Khorasanian : Fourth author
   Materials Today Communications, pp.1-11, 2024
4. "Fabrication of Al5083-(CeO2-TiO2) hybrid surface composite via friction stir processing combined with plasma electrolytic oxidation"
   كيانا اسفندمز : First author, khalil Ranjbar : second author, Mehdi Khorasanian : Third author
   Journal of Manufacturing Innovations, pp.23-36, 2023
5. "Microstructure and corrosion performance of plasma electrolytic oxidation coatings on the surface of conventional and selective laser melted Ti-6Al-4V alloy"
   Mehdi Khorasanian : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author
   Surface Topography: Metrology and Properties, pp.1-12, 2022
6. "In-situ Manufacturing of Al7075/TiO2, Al7075/SiC and Al7075/TiO2/SiC Based Composite Layers by Friction Surfacing on Commercially Pure"
   Seyed Reza Alavi zaree : First author, Mehdi Khorasanian : second author, omid gholam mashak : Third author
   Russian Journal of Non-Ferrous Metals, pp.237-245, 2022
7. "Investigation of Microstructure and Mechanical Properties of AZ91 Magnesium Alloy Produced by Directional Solidification Method in Different Angles Using CAFE Simulation"
   محسن خسرواقاياني : First author, Mehdi Khorasanian : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
   International Journal of Metalcasting, pp.1-15, 2022
8. "Effect of Different Heat Treatments with and without Deep Cryogenic Treatment on the Morphology of Mg17Al12 Intermetallic Phase and Hardness of AZ91 Magnesium Alloy"
   محسن خسرواقاياني : First author, Seyed Reza Alavi zaree : second author, Mehdi Khorasanian : Third author, Moustafa Eskandari : Fourth author
   Practical Metallography, pp.15-38, 2022
9. "Failure Mechanisms and Solutions for Fin-Pass Rolls Repair-Ring at an Electric Resistance Welding Pipe Plant"
   mohamad lari baghal : First author, Mahdi Torfi : second author, Mehdi Khorasanian : Third author, Seyed Reza Alavi zaree : Fourth author
   Iranian Journal of Oil & Gas Science and Technology, pp.31-42, 2021
10. "Long-term oxidation behaviour and thermal stability of heat-resistant stainless steel claddings deposited on AISI 316 stainless steel by the GTAW process"
    فرج اله هدايت : First author, Reza Dehmalaie : second author, Mehdi Khorasanian : Third author, behnam lotfi : Fourth author
    Surface and Coatings Technology, pp.1-17, 2021
11. "Effect of Addition of Silver and Chilled Casting on Corrosion Behavior of AZ91 Magnesium Alloy"
    Mehdi Khorasanian : First author, Mahdi Yeganeh : second author, نويد غلام زاده : Third author, Seyed Reza Alavi zaree : Fourth author
    International Journal of Metalcasting, pp.1184-1196, 2021
12. "Addition of Silver to an Mg–Al–Zn Alloy Treated by Conventional and Chilled Solidification: A Microstructural Approach"
    Mehdi Khorasanian : First author, Seyed Reza Alavi zaree : second author, Pouria Kamaii : Third author, Moustafa Eskandari : Fourth author
    PHYSICS OF METALS AND METALLOGRAPHY, pp.69-75, 2020
13. "Effect of Sodium Silicate Concentration on Morphology of Ceramic Coatings Produced on Commercially Pure Aluminum Using Plasma Electrolytic Oxidation"
    Mehdi Khorasanian : First author, فرزانه شمسي : second author, mohamad lari baghal : Third author
    Russian Journal of Non-Ferrous Metals, pp.762-767, 2020
14. "Direct electroplating of nickel on ABS plastic using polyaniline–silver surface composite synthesized using different acids"
    maryam mehdizadeh : First author, Mehdi Khorasanian : second author, mohamad lari baghal : Third author
    Journal of Coatings Technology and Research, pp.1433-1442, 2018
15. "Effect of potassium permanganate on corrosion and wear properties of ceramic coatings manufactured on CP-aluminum by plasma electrolytic oxidation"
    فرزانه شمسي : First author, Mehdi Khorasanian : second author, mohamad lari baghal : Third author
    Surface and Coatings Technology, pp.63-72, 2018
16. "High temperature behavior of diffusion aluminide coating on alloy 600 superalloy"
    يحيي اقايار : First author, Mehdi Khorasanian : second author, behnam lotfi : Third author
    Materials at High Temperatures, pp.343-354, 2018
17. "High strength Al with uniformly distributed Al2O3 fragments fabricated by accumulative roll bonding and plasma electrolytic oxidation"
    mohsen reihanian : First author, جليلي شاه منصوري-معصومه : second author, Mehdi Khorasanian : Third author
    Materials science and Engineering A, pp.195-199, 2015

Conference Paper

1. "The effect of heat input on the microstructure and wear behavior of duplex stainless steel weld overlay applied to A283 carbon steel by GTAW method"
   پريسا احمدي : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author, Mehdi Khorasanian : Fourth author
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
2. "تاثیر حرارت ورودی بر ریزساختار و تغییرات سختی در روکش جوشی فولاد زنگ نزن روی فولاد ساده کربنی با روش GTAW"
   پريسا احمدي : First author, Reza Dehmalaie : second author, Mehdi Khorasanian : Third author, Mahdi Yeganeh : Fourth author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
3. "بررسی تاثیر عملیات حرارتی بر رفتار خوردگی پوشش های Ni-Cr تولید شده به روش آبکاری الکتریکی"
   mohamad lari baghal : First author, ياسين شيخي : second author, Mehdi Khorasanian : Third author
   5th national conference on materials,metallurgy and mining, 2022
4. "ارزیابی ریزساختار و مقاومت به اکسیداسیون روکشهای فولاد زنگ نزن فریتی ایجاد شده با فرایند GTAWبر روی فولاد زنگ نزن آستنیتیAISI316"
   فرج اله هدايت : First author, Reza Dehmalaie : second author, behnam lotfi : Third author, Mehdi Khorasanian : Fourth author
   بیست و سومین سمپوزیوم ملی فولاد 400, 2021
5. "ندارد"
   mohamad lari baghal : First author, Mehdi Khorasanian : second author, Seyed Reza Alavi zaree : Third author, Reza Dehmalaie : Fourth author, Mohammadreza Tavakoli shoushtari : Author 5, Moustafa Eskandari : Author 6
   23th Steel Symposium 400, 2021
6. "تأثیر مبردگذاری و افزودن عنصر نقره بر ریزساختار و خواص خوردگی آلیاژ منیزیم AZ91"
   نويد غلام زاده : First author, Mehdi Khorasanian : second author, Mahdi Yeganeh : Third author, Seyed Reza Alavi zaree : Fourth author
   1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
7. "Evaluation of the effect of thick ceramic coating on oxidation reduction in preheating furnaces"
   mohamad lari baghal : First author, Mehdi Khorasanian : second author, Moustafa Eskandari : Third author, Seyed Reza Alavi zaree : Fourth author, reza Abdideh : Author 5
   Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
8. "بررسی تاثیر افزودن عنصر نقره و انجماد جهت دار بر ریزساختار و سختی آلیاژ AZ91"
   Pouria Kamaii : First author, Mehdi Khorasanian : second author, Seyed Reza Alavi zaree : Third author
   IMAT 2018, 2018
9. "Nickel electroplating on ABS substrate with the aid of intermediate polyaniline-silver composite layer"
   maryam mehdizadeh : First author, Mehdi Khorasanian : second author, mohamad lari baghal : Third author
   6th international conference on materials engineering and metallurgy (imat), 2017
10. "Fabrication of Al5083-TiO2 surface composite by plasma oxidation"
    كيانا اسفندمز : First author, khalil Ranjbar : second author, Mehdi Khorasanian : Third author
    Internation conference on materials and metallurgical engineering, 2017
11. "ندارد"
    omid gholam mashak : First author, Seyed Reza Alavi zaree : second author, Mehdi Khorasanian : Third author
    Student Scientific conference on Iranian materials, 2017
12. "The effect of formic acid on the microstructure and electrochemical behavior of Ni-Cr coatings produced by electroplating"
    ياسين شيخي : First author, mohamad lari baghal : second author, Mehdi Khorasanian : Third author
    5th International Conference on Materials Engineering and Metallurgy, 2016
13. "The effect of potassium permanganate on the corrosion behavior of ceramic coatings on pure aluminium by PEO"
    فرزانه شمسي : First author, Mehdi Khorasanian : second author, mohamad lari baghal : Third author
    5th International Conference on Materials Engineering and Metallurgy, 2016
14. "Investigation of microstructure of dissimilar welds between duplex stainless steel UNS 2205 and austenitic stainless steel AISI 304"
    Morteza Jex : First author, Mehdi Khorasanian : second author, Iman Hajian Nia : Third author
    15 national conference on welding & inspection & 4 national conference on NDT, 2014
15. "Evaluation of mechanical properties of dissimilar welds between duplex stainless steel UNS2205 and austenitic stainless steel AISI 304"
    Mehdi Khorasanian : second author, Iman Hajian Nia : Third author, Morteza Jex : Presnter
    15 national conference on welding & inspection & 4 national conference on NDT, 2014