صفحه اعضا هیئت علمی - دانشکده مهندسی
Journal Paper
-
"Investigation of the addition of Methionine on the corrosion of 316L stainless steel fabricated by SLM method in sulfuric acid media"
محمدحسين رضواني : First author,
Mahdi Yeganeh : second author,
mohamad lari baghal : Third author
Eseghlal,
pp.19-35,
2022
-
"Synthesis of BiVO4 nanoparticles by the co-precipitation method and study the crystal structure, optical and photocatalytic properties of them"
Nasrin Ghazkoob : First author,
Morteza ZARGAR SHOUSHTARI : second author,
iraj kazeminezhad : Third author,
mohamad lari baghal : Fourth author
مجله بلورشناسی و کانی شناسی ایران,
pp.797-806,
2020
-
"Effect of Ti content on the microstructure, hardness, wear properties, and corrosion resistance of AlCrCuFeNi high entropy alloy"
علي رکابي زاده : First author,
Mahdi Yeganeh : second author,
mohamad lari baghal : Third author
Materials Today Communications,
pp.1-16,
2024
-
"Finite Element Simulation of Temperature Field and Residual Stress Induced by Surface Welding Process of Mild Steel"
زهرا شهریاری : First author,
mohamad lari baghal : second author,
Khalil Gheisari : Third author
Journal of Manufacturing Innovations,
pp.37-51,
2023
-
"Electrochemical behavior of laser powder bed fusion fabricated 316L stainless steel in a nitric acid solution"
سحر سليماني بابادي : First author,
Mahdi Yeganeh : second author,
mohamad lari baghal : Third author
Journal of Laser Applications,
pp.1-12,
2022
-
"Investigation of structural, magnetic, optical and photocatalytic properties of zinc ferrite nanowires/bismuth vanadate composite"
Nasrin Ghazkoob : First author,
Morteza ZARGAR SHOUSHTARI : second author,
iraj kazeminezhad : Third author,
mohamad lari baghal : Fourth author
Journal of Alloys and Compounds,
pp.163467-163480,
2022
-
"A comparison between the corrosion behavior of 316L stainless steel manufactured by rolling and laser powder bed fusion in 0.1 M H2SO4 solution"
Hossein Ramezanalizadeh : First author,
Mahdi Yeganeh : second author,
محمدحسين رضواني : Third author,
mohamad lari baghal : Fourth author
International Journal of Iron & Steel Society of Iran,
pp.47-54,
2022
-
"Failure Mechanisms and Solutions for Fin-Pass Rolls Repair-Ring at an Electric Resistance Welding Pipe Plant"
mohamad lari baghal : First author,
Mahdi Torfi : second author,
Mehdi Khorasanian : Third author,
Seyed Reza Alavi zaree : Fourth author
Iranian Journal of Oil & Gas Science and Technology,
pp.31-42,
2021
-
"Electrochemical behavior of additively manufactured 316L stainless steel in H2SO4 solution containing methionine as an amino acid"
Mahdi Yeganeh : First author,
محمدحسين رضواني : second author,
mohamad lari baghal : Third author
Colloids and Surfaces A: Physicochemical and Engineering Aspects,
pp.1-11,
2021
-
"Structural, magnetic and optical investigation of AC pulse electrodeposited zinc ferrite nanowires with different diameters and lengths"
Nasrin Ghazkoob : First author,
Morteza ZARGAR SHOUSHTARI : second author,
iraj kazeminezhad : Third author,
mohamad lari baghal : Fourth author
Journal of Magnetism and Magnetic Materials,
pp.168113-168123,
2021
-
"Effect of Sodium Silicate Concentration on Morphology of Ceramic Coatings Produced on Commercially Pure Aluminum Using Plasma Electrolytic Oxidation"
Mehdi Khorasanian : First author,
فرزانه شمسي : second author,
mohamad lari baghal : Third author
Russian Journal of Non-Ferrous Metals,
pp.762-767,
2020
-
"Role of Cracked Interlayer on Deformation Processing of Al/hard Chrome/Al Laminate"
سکینه فاخر : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author,
Laleh Fatahi : Fourth author
Metals and Materials International,
pp.1-13,
2020
-
"Effect of rejuvenation heat treatment on microstructure and hot corrosion resistance of a service-exposed nickel-based gas turbine blade"
عاطفه جمالپور : First author,
Esmaeil Hajjari : second author,
mohamad lari baghal : Third author
MATERIALS RESEARCH EXPRESS,
pp.1-11,
2020
-
"Premature damage of the second stage nozzle guide vanes of a gas turbine made of Inconel 738LC"
رضا چهارلنگ : First author,
Esmaeil Hajjari : second author,
mohamad lari baghal : Third author,
Mehran Siahpoosh : Fourth author
Engineering Failure analysis,
pp.803-816,
2019
-
"Fabrication of glass/carbon fiber-reinforced Al-based composites through deformation bonding"
mohsen reihanian : First author,
Mohammad Dashtbozorg : second author,
mohamad lari baghal : Third author
Journal of Composite Materials,
pp.2531-2543,
2019
-
"Wear-Resistant Al/SiC-Gr Hybrid Metal Matrix Composite Fabricated by Multiple Annealing and Roll Bonding"
mohsen reihanian : First author,
ارسلان بهارلو : second author,
mohamad lari baghal : Third author
Journal of Materials Engineering and Performance,
pp.6676-6689,
2018
-
"Microstructural control and layer continuity in deformation bonding of metallic laminated composites"
Marzieh Rah Dari : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author
Materials science and Engineering A,
pp.98-110,
2018
-
"Direct electroplating of nickel on ABS plastic using polyaniline–silver surface composite synthesized using different acids"
maryam mehdizadeh : First author,
Mehdi Khorasanian : second author,
mohamad lari baghal : Third author
Journal of Coatings Technology and Research,
pp.1433-1442,
2018
-
"Effect of potassium permanganate on corrosion and wear properties of ceramic coatings manufactured on CP-aluminum by plasma electrolytic oxidation"
فرزانه شمسي : First author,
Mehdi Khorasanian : second author,
mohamad lari baghal : Third author
Surface and Coatings Technology,
pp.63-72,
2018
-
"Failure assessment of ASTM A213-T12 superheater boiler tubes in a natural gas liquid plant"
ارزو فيروزه : First author,
khalil Ranjbar : second author,
mohamad lari baghal : Third author,
armin heidari : Fourth author,
Anayat Allah Mohmi : Author5
Engineering Failure analysis,
pp.15-27,
2018
-
"Nanostructured Al/SiC-graphite composites produced by accumulative roll bonding: role of graphite on microstructure, wear and tensile behavior"
mohsen reihanian : First author,
سارا فايضي پور : second author,
mohamad lari baghal : Third author
Journal of Materials Engineering and Performance,
pp.1908-1919,
2017
-
"A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB)"
mohsen reihanian : First author,
mohamad lari baghal : second author,
fateme keshavarz : Third author,
mohammad hosein paydar : Fourth author
Journal of Ultrafine Grained and Nanostructured Materials (JUFGNSM),
pp.29-35,
2016
Conference Paper
-
"The Effect of Ni on the Corrosion Behavior of FeCr/B4C Composite Hard Cladding Applied on Plain Carbon Steel by Gas Tungsten Arc Welding"
اميرحسين گمرگ چي زاده : First author,
Khalil Gheisari : second author,
mohamad lari baghal : Third author,
Mohammadreza Tavakoli shoushtari : Fourth author
The 2nd International Congress CORROSION and 22 nd National Congress CORROSION,
2024
-
"ندارد"
محمدعلي اصف : First author,
mohamad lari baghal : second author,
Reza Dehmalaie : Third author,
Amin Abdollahzade : Fourth author
3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining,
2024
-
"ندارد"
محمدرحيم بهرامن : First author,
Reza Dehmalaie : second author,
mohamad lari baghal : Third author,
Amin Abdollahzade : Fourth author
3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining,
2024
-
"ندارد"
هومن حيدري : First author,
Khalil Gheisari : second author,
mohamad lari baghal : Third author,
زهرا شهریاری : Fourth author
3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining,
2024
-
"Studying the effect of sodium chloride concentration on the corrosion behavior of polyamine corrosion inhibitors used in water boilers of sugar production industries"
mohamad lari baghal : First author,
khalil Ranjbar : second author,
Mohammadreza Tavakoli shoushtari : Third author,
Seyed Reza Alavi zaree : Fourth author,
Rahim Bavi : Author 5,
ebrahim mousavipour : Author 6,
ali samimi : Author 7
2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining,
2023
-
"Studying the tribological characteristics of martensitic stainless steel used in steam turbine blades of Hakim Farabi Kushte and Sanat Khuzestan."
Mohammadreza Tavakoli shoushtari : First author,
mohamad lari baghal : second author,
Seyed Reza Alavi zaree : Third author,
Ebrahim Mosavi pour : Fourth author
2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining,
2023
-
"corrosion resistance of the galvanised coating reinforced by CeO2 and SiC particles"
خليل سعديان : First author,
khalil Ranjbar : second author,
mohamad lari baghal : Third author
24th annual symposium on steel 140,
2022
-
"بررسی تاثیر عملیات حرارتی بر رفتار خوردگی پوشش های Ni-Cr تولید شده به روش آبکاری الکتریکی"
mohamad lari baghal : First author,
ياسين شيخي : second author,
Mehdi Khorasanian : Third author
5th national conference on materials,metallurgy and mining,
2022
-
"ندارد"
mohamad lari baghal : First author,
Mehdi Khorasanian : second author,
Seyed Reza Alavi zaree : Third author,
Reza Dehmalaie : Fourth author,
Mohammadreza Tavakoli shoushtari : Author 5,
Moustafa Eskandari : Author 6
23th Steel Symposium 400,
2021
-
"ندارد"
mohamad lari baghal : First author,
Mohammadreza Tavakoli shoushtari : second author,
ابراهيم باستي : Third author,
Esmaeil Hajjari : Fourth author,
Reza Dehmalaie : Author 5
23th Steel Symposium 400,
2021
-
"ندارد"
احسان معين زاده : First author,
mohamad lari baghal : second author,
Esmaeil Hajjari : Third author,
hosein kharazmipoor : Fourth author
1st International Conference & 4th National Conference on Materials, Metallurgy & Mining,
2021
-
"ندارد"
جاويد ناصري : First author,
Seyed Mohsen Sadrossadat Zadeh : second author,
mohamad lari baghal : Third author
1st International Conference & 4th National Conference on Materials, Metallurgy & Mining,
2021
-
"ندارد"
ابراهيم باستي : First author,
mohamad lari baghal : second author,
Mohammadreza Tavakoli shoushtari : Third author
1st International Conference & 4th National Conference on Materials, Metallurgy & Mining,
2021
-
"ندارد"
محمدحسين رضواني : First author,
Mahdi Yeganeh : second author,
mohamad lari baghal : Third author
1st International Conference & 4th National Conference on Materials, Metallurgy & Mining,
2021
-
"Investigation the effect of preweld heat treatment variables on distortion, residual stress and microstructure of In738LC used gas turbine nozzles"
راحيل مهرخو : First author,
Esmaeil Hajjari : second author,
mohamad lari baghal : Third author
9th international conference on materials engineering and metallurgy,
2020
-
"Production of aluminum / nickel composite by means of cumulative rolling bond and electrical deposition and evaluation of mechanical behavior"
سعيده عظيمي : First author,
mohamad lari baghal : second author,
mohsen reihanian : Third author
3rd National Conference on Materials Engineering, Metallurgy,
2020
-
"Evaluation of the effect of thick ceramic coating on oxidation reduction in preheating furnaces"
mohamad lari baghal : First author,
Mehdi Khorasanian : second author,
Moustafa Eskandari : Third author,
Seyed Reza Alavi zaree : Fourth author,
reza Abdideh : Author 5
Second National Conference on Materials Engineering, Metallurgy and Mine,
2019
-
"Effect of hard layer thickness on the layer continuity during multilayered composite rolling"
Marzieh Rah Dari : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author
کنفرانس ملی مهندسی مواد، متالورژی و معدن ایران,
2018
-
"Numerical simulation of the effect of preheat and fixtures on distortion and residual stress in repair welding of Ruston TB4000 gas turbine second stage nozzle blades"
Mohammad Sajad Rabii Zade : First author,
mohamad lari baghal : second author,
Esmaeil Hajjari : Third author
6th National Gas Turbine Conference,
2018
-
"Comparison of Lagrangian and Eulerian Finite Element Methods during Sandwich Sheet Rolling"
سکینه فاخر : First author,
mohamad lari baghal : second author,
mohsen reihanian : Third author,
Laleh Fatahi : Fourth author
International Conference on Mechanics of Advanced Materials and Equipment,
2018
-
"Numerical simulation of distortion and residual stress in repair welding of Ruston TB4000 gas turbine second stage nozzle blades"
Mohammad Sajad Rabii Zade : First author,
Esmaeil Hajjari : second author,
mohamad lari baghal : Third author
International Conference on Mechanics of Advanced Materials and Equipment,
2018
-
"Parameters affecting the bond strength of aluminum composite reinforced with carbon/glass short fiber"
Mohammad Dashtbozorg : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author
International Conference on Mechanics of Advanced Materials and Equipment,
2018
-
"Numerical optimization and experimental validation of induced distortion in 316L PCGTAW weldments"
جاويد ناصري : First author,
Seyed Mohsen Sadrossadat Zadeh : second author,
mohamad lari baghal : Third author
international conference on mechanics of advanced materials and equipment,
2018
-
"Nickel electroplating on ABS substrate with the aid of intermediate polyaniline-silver composite layer"
maryam mehdizadeh : First author,
Mehdi Khorasanian : second author,
mohamad lari baghal : Third author
6th international conference on materials engineering and metallurgy (imat),
2017
-
"Microstructure and mechanical properties of Al/SiC/Gr hybrid composite produced by continual annealing and roll bonding (CAR)"
ارسلان بهارلو : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author
1st Iran Congress On Industrial Applications of Advanced Materials and Manufacturing,
2017
-
"Investigating the effect of magnetic field on microstructure Ni-SiC composite coating fabricated by electroplating"
معصومه احمدي : First author,
behnam lotfi : second author,
mohamad lari baghal : Third author
17 Seminar National on Surface Engineering,
2017
-
"Microstructure and mechanical properties of Al/SiC/Gr hybrid composite via accumulative roll bonding (ARB)"
سارا فايضي پور : First author,
mohsen reihanian : second author,
mohamad lari baghal : Third author
5th International Conference on Materials Engineering and Metallurgy,
2016
-
"The effect of formic acid on the microstructure and electrochemical behavior of Ni-Cr coatings produced by electroplating"
ياسين شيخي : First author,
mohamad lari baghal : second author,
Mehdi Khorasanian : Third author
5th International Conference on Materials Engineering and Metallurgy,
2016
-
"Assessment of hydrogen attack in superheater boiler tubes in liquid and liquid-gas station of Gachsaran"
ارزو فيروزه : First author,
khalil Ranjbar : second author,
mohamad lari baghal : Third author
5th International Conference on Materials Engineering and Metallurgy,
2016
-
"The effect of potassium permanganate on the corrosion behavior of ceramic coatings on pure aluminium by PEO"
فرزانه شمسي : First author,
Mehdi Khorasanian : second author,
mohamad lari baghal : Third author
5th International Conference on Materials Engineering and Metallurgy,
2016
-
"Effects of B contents on the microstructure and hardness of Fe-Cr-Co hardfacing alloy coating on CK-45 steel as a substrate"
احسان سلطاني : First author,
Mohammadreza Tavakoli shoushtari : second author,
mohamad lari baghal : Third author,
Khalil Gheisari : Fourth author
3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining,
2024
