Journal Paper

1. "Nonlinear vibration of functionally graded circular nanoplates based on the differential strain-gradiant model"
   Morteza Pourabdi : First author, mohammad shishesaz : second author, shahram shahroee : Third author, SeyedAlireza SeyedRoknizadeh : Fourth author
   Journal of new applied and computational findings in mechanical systems, pp.44-55, 2023
2. "A review on application of radial interpolation of boundary element method on solution of facture mechanics problems"
   Behrooz Arian Nejad : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
   Journal of new applied and computational findings in mechanical systems, pp.1-10, 2022
3. "The Effect of Ferrule on Stress distribution in a Two-Rooted Maxillary First Premolar with Cast post and core; A Finite Element Study"
   mohammad shishesaz : First author, رضا اميري مقدم : second author, Asadollah Ahmadzadeh : Third author
   Journal of new applied and computational findings in mechanical systems, pp.89-102, 2021
4. "Investigating the Static Pull-in Instability of Biosensors Using Modified Adomian Decomposition Method (MAD)"
   fatemeh sheykh mamu : First author, Hamid Mohammad-Sedighi : second author, mohammad shishesaz : Third author
   مجله مهندسی مکانیک دانشگاه تبریز, pp.127-136, 2021
5. "Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm"
   mohammad shishesaz : First author, Saeid yaghoubi : second author, keyamehr rozbakhsh : Third author
   مجله مکانیک هوافضا, pp.71-83, 2020
6. "stress analysis in a single lap adhesive joint"
   مجتبي حسن وند : First author, mohammad shishesaz : second author
   journal of Solids and Fluids, pp.49-58, 2017
7. "transient stress didtribution in composite adhesive joints due to fiber breakage"
   mohammad shishesaz : First author, saeed yaghobi : second author
   مواد نوین, pp.1-18, 2015
8. "Comparison of stress distribution in cantilever and one end fixed prosthesis"
   mohammad shishesaz : First author, Asadollah Ahmadzadeh : second author, Shahab Shahidi : Third author
   Journal of Isfahan Dental School, pp.302-316, 2015
9. "Suitable parameters determination of lamb wave generation source with low-attenuation for three-layer adhesive joints inspection"
   pejman taghi pour bergani : First author, Khosro Naderan Tahan : second author, sina sodagar : Third author, mohammad shishesaz : Fourth author
   Modarres mechanical engineering journal, pp.63-74, 2015
10. "transient stress distribution in due to fiber breakage in single lap adhesive joints"
    mohammad shishesaz : First author, Shapour Moradi : second author, saeed yaghobi : Third author
    journal of Solids and Fluids, pp.113-126, 2014
11. "The Effect of Fiber Shape and Spacing on Stress Distribution in a Composite Monolayer with an Internal Crack"
    mohammad shishesaz : First author, mahdi malaki : second author
    نشریه علمی پژوهشی امیرکبیر, pp.21-28, 2011
12. "Flexibility and Stress Concentration Factors in Pipe Bends under Combined Loadings"
    Khosro Naderan Tahan : First author, mohammad shishesaz : second author, Mohssen Menaeefar : Third author
    فصلنامه علمی - پژوهشی شریف, pp.27-37, 2010
13. "Stress Analysis of closed Multi Cell Sections Under Torsion"
    Khosro Naderan Tahan : First author, mohammad shishesaz : second author, Mehday Bahrami : Third author
    نشریه علمی پژوهشی امیرکبیر, pp.29-36, 2010
14. "توزيع تنش در اطراف يك سوراخ در يك تك لايه هيبريد با عرض محدود"
    mohammad shishesaz : First author
    نشریه امیر کبیر, pp.202-208, 2001
15. "اثر نيروي كششي ماتريس بر توزيع تنش در مواد مركب مختلط (هيبريد)"
    mohammad shishesaz : First author
    مجله بین المللی مهندسی دانشگاه علم و صنعت, pp.87-98, 2000
16. "Secondary Resonances of Asymmetric Gyroscopic Spinning Composite Box Beams"
    reza bavi : First author, Hamid Mohammad-Sedighi : second author, mohammad shishesaz : Third author
    International Journal of Structural Stability and Dynamics, pp.1-27, 2024
17. "Vibrational analysis of graphyne-based nanoplates using a hybrid nonlocal strain gradient-atomistic simulation model"
    عباس مرادی : First author, Afshin Ghanbarzadeh : second author, mohammad shishesaz : Third author, Hamid Mohammad-Sedighi : Fourth author
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1-16, 2024
18. "Progressive damage analysis for fatigue life prediction in plain weave composites: A multi-scale approach"
    اميرمحمد قنواتي : First author, Reza Mosalmani : second author, mohammad shishesaz : Third author
    Journal of Composite Materials, pp.343-359, 2024
19. "A size effect parameter-calibrated strain gradient theory (SGT) model for vibrational analysis of the graphyne using atomistic simulations"
    Morteza Pourabdi : First author, mohammad shishesaz : second author, Shahram Shahrooi : Third author, SeyedAlireza SeyedRoknizadeh : Fourth author
    The European Physical Journal Plus, pp.1-20, 2024
20. "Nonlinear vibration of functionally graded circular nanoplates based on the stress-driven method"
    mohammad shishesaz : First author, mojtaba shariaty : second author, Reza Mosalmani : Third author
    JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, pp.191-217, 2023
21. "Stress-driven Approach to Vibrational Analysis of FGM Annular Nano-plate based on First-order Shear Deformation Plate Theory"
    mojtaba shariaty : First author, mohammad shishesaz : second author, Reza Mosalmani : Third author
    Journal of Applied and Computational Mechanics, pp.637-657, 2023
22. "Enriched MQ-H-RPIM method optimized by M-PSO algorithm and Voronoi discretization to estimation of the 3D-SIF’s in fracture mechanics problems"
    Behrooz Arian Nejad : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
    Engineering Analysis with Boundary Elements, pp.471-483, 2023
23. "Free vibration characteristics of viscoelastic nano-disks based on modified couple stress theory"
    Ali Alizadeh : First author, mohammad shishesaz : second author, shahram shahroee : Third author, Arash Reza : Fourth author
    The Journal of Strain Analysis for Engineering Design, pp.270-296, 2023
24. "Effect of crack characteristics on the vibration behavior of post-buckled functionally graded plates"
    Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Structures, pp.181-199, 2023
25. "The Application of the Isogeometric Method Based on Bézier Extraction for the Thermo-Plastic Analysis of Welded Steel Plate"
    mohammad mehdi Shoheib : First author, shahram shahroee : second author, mohammad shishesaz : Third author, Mahdi Hamzehei : Fourth author
    Mechanics of Solids, pp.245-265, 2023
26. "A Novel Approach to Investigate Transient Stress Distribution Caused by Fiber Breakage in Simple and Hybrid Composite Materials"
    Saeed Yaghoubi : First author, mohammad shishesaz : second author
    Journal of Failure Analysis and Prevention, pp.325-338, 2023
27. "Modeling of a novel magneto-electro-elastic energy harvesting system subjected to applied electric voltage with simultaneous use as an electrical actuator system"
    Meisam Moory shirbani : First author, mohammad shishesaz : second author
    Iranian Journal of Energy and Environment, pp.1-10, 2023
28. "Parametric resonance and bifurcation analysis of thin-walled asymmetric gyroscopic composite shafts: An asymptotic study"
    reza bavi : First author, Hamid Mohammad-Sedighi : second author, Ali Hajnayeb : Third author, mohammad shishesaz : Fourth author
    THIN-WALLED STRUCTURES, pp.1-16, 2023
29. "Three-Dimensional Thermo-Mechanical Elastic Analysis of Functionally Graded Five Layers Composite Sandwich Plate on Winkler Foundations"
    حميد كردوني : First author, mohammad shishesaz : second author, Reza Mosalmani : Third author
    Journal of Composites Science, pp.372-393, 2022
30. "Free Vibrational Analysis of a Functionally Graded Five-Layer Sandwich Plate Resting on a Winkler Elastic Foundation in a Thermal Environment"
    mohammadreza kardouni : First author, mohammad shishesaz : second author, Shapour Moradi : Third author, Reza Mosalmani : Fourth author
    Journal of Composites Science, pp.325-351, 2022
31. "Application of Particle Swarm Optimization for Improvement of Peel Strength in a Laminated Double-Lap Composite Joint"
    mohammad ali arjmandi : First author, mohammad shishesaz : second author, Afshin Ghanbarzadeh : Third author, Behzad Mossalanehzad : Fourth author, Mohammad Akrami : Author5
    APPLIED SCIENCES-BASEL, pp.1-19, 2022
32. "Optimization of adhesive single-lap joints under bending moment"
    مجتبي حسن وند : First author, hesam abbaszadeh : second author, mohammad shishesaz : Third author
    Journal of Adhesion, pp.1687-1712, 2022
33. "Buckling analysis of composite conical shells reinforced by agglomerated functionally graded carbon nanotube"
    keyvan eskandari charati : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    Archives of Civil and Mechanical Engineering, pp.1-13, 2022
34. "Fatigue Crack Propagation of Welded Steel Pipeline under Cyclic Internal Pressure by Bézier Extraction Based XIGA"
    mohammad mehdi Shoheib : First author, shahram shahroee : second author, mohammad shishesaz : Third author, Mahdi Hamzehei : Fourth author
    Journal of Pipeline Systems Engineering and Practice, pp.1-15, 2022
35. "Size-Effect Analysis on Vibrational Response of Functionally Graded Annular Nano-Plate Based on Nonlocal Stress-Driven Method"
    mohammad shishesaz : First author, mojtaba shariaty : second author, Mohammad Hosseini : Third author
    International Journal of Structural Stability and Dynamics, pp.1-31, 2022
36. "Stress analysis of the five layer circular sandwich plate subjected to uniform distributed load by layerwise theory along with second order shear deformation theory"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    Australian Journal of Mechanical Engineering, pp.625-636, 2022
37. "The Application of the Extended Isogeometric Analysis (XIGA) with K-Refinement Approach for the Prediction of Fatigue Life in Linear Elastic Fracture Mechanic"
    Ata Fardaghaie : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
    International Journal of Advanced Design and Manufacturing Technology, pp.29-50, 2022
38. "A novel correlation to calculate stress intensity factors of the semi‑elliptical crack in high‑strength carbon steelتحلیل"
    Ata Fardaghaie : First author, shahram shahroee : second author, mohammad shishesaz : Third author
    Journal of Brazilian Society of Mechanical Sciences and Engineering, pp.1-15, 2022
39. "Simultaneous resonance and stability analysis of unbalanced asymmetric thin-walled composite shafts"
    reza bavi : First author, Ali Hajnayeb : second author, Hamid Mohammad-Sedighi : Third author, mohammad shishesaz : Fourth author
    International Journal of Mechanical Sciences, pp.1-16, 2021
40. "A new approach for prediction of the remaining strength of pipeline with external defects"
    Hojjat Gholami : First author, shahram shahroee : second author, mohammad shishesaz : Third author
    Engineering Failure analysis, pp.105754-105754, 2021
41. "On the calibration of size parameters related to non-classical continuum theories using molecular dynamics simulations"
    mojtaba shariaty : First author, Babak Azizi : second author, mohammad Hosseini : Third author, mohammad shishesaz : Fourth author
    Internationl journal of engineering science, pp.103544-103544, 2021
42. "Micromechanical approach to viscoelastic stress analysis of a pin-loaded hole in unidirectional laminated PMC"
    Arash Reza : First author, mohammad shishesaz : second author, Hamid Mohammad-Sedighi : Third author
    Polymers and Polymer Composites, pp.1144-1157, 2021
43. "Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method"
    mojtaba shariaty : First author, mohammad shishesaz : second author, Reza Mosalmani : Third author, SeyedAlireza SeyedRoknizadeh : Fourth author
    Journal of Applied and Computational Mechanics, pp.962-980, 2021
44. "A review on stress-driven nonlocal elasticity theory"
    mojtaba shariaty : First author, mohammad shishesaz : second author, Hossein sahbafar : Third author, Morteza Pourabdi : Fourth author, mohammad Hosseini : Author5
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.535-552, 2021
45. "Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method"
    mojtaba shariaty : First author, mohammad shishesaz : second author, Reza Mosalmani : Third author, SeyedAlireza SeyedRoknizadeh : Fourth author, mohammad hosseini : Author5
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.507-534, 2021
46. "Optimization of composite laminates with free edges under extension load and thermal load"
    Behnam Kazemshahi : First author, mohammad mansori : second author, mohammad shishesaz : Third author
    Advanced Composites and Hybrid Materials, pp.2206-2222, 2021
47. "Analysis of Axisymmetric Vibration of Functionally-Graded Circular Nano-Plate Based on the Integral Form of the Strain Gradient Model"
    Morteza Pourabdi : First author, mohammad shishesaz : second author, Shahram Shahrooi : Third author, SeyedAlireza SeyedRoknizadeh : Fourth author
    Journal of Applied and Computational Mechanics, pp.2196-2220, 2021
48. "Strain-based fatigue life analysis of pipelines with external defects under cyclic internal pressure"
    Hojjat Gholami : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
    The Journal of Strain Analysis for Engineering Design, pp.313-326, 2021
49. "A Modified Couple Stress-Based Model for the Nonlinear Vibrational Analysis of Nano-Disks Using Multiple Scales Method"
    Ali Alizadeh : First author, mohammad shishesaz : second author, shahram shahroee : Third author, Arash Reza : Fourth author
    Journal of Applied and Computational Mechanics, pp.580-596, 2021
50. "Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load"
    Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.256-270, 2021
51. "Thermo‑hyper‑viscoelastic analysis of a rubber cylinder under cyclic deformation"
    اميرحشمت خدمتي بازكيايي : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
    Journal of Rubber Research, pp.13-26, 2021
52. "Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness"
    abbas barati : First author, mahdi mousavi khoram : second author, mohammad shishesaz : Third author, mohammad Hosseini : Fourth author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.340-360, 2020
53. "Bending Analysis of Bidirectional FGM Timoshenko Nanobeam Subjected to Mechanical and Magnetic Forces and Resting on Winkler–Pasternak Foundation"
    mahdi mousavi khoram : First author, mohammad Hosseini : second author, Amin Hadi : Third author, mohammad shishesaz : Fourth author
    International Journal of Applied Mechanics, pp.1-20, 2020
54. "Modified Approach for Predicting the Remaining Strength of High-Strength Gouged Pipelines"
    Hojjat Gholami : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
    Journal of Pipeline Systems Engineering and Practice, pp.1-7, 2020
55. "A framework for model base hyper‑elastic material simulation"
    اميرحشمت خدمتي بازكيايي : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
    Journal of Rubber Research, pp.1-13, 2020
56. "INVESTIGATION OF MECHANICAL PROPERTIES AND MODE I COHESIVE FAILURE OF THE ADHESIV LAYER IN SANDWICH BEAMS WITH A CELLULAR CORE"
    mohammad shishesaz : First author, محمد دهقاني : second author, مجتبي حسن وند : Third author
    Journal of Applied Mechanics and Technical Physics, pp.124-130, 2020
57. "Predicting the Burst Pressure of High-Strength Carbon Steel Pipe with Gouge Flaws Using Artificial Neural Network"
    Hojjat Gholami : First author, shahram shahroee : second author, mohammad shishesaz : Third author
    Journal of Pipeline Systems Engineering and Practice, pp.1-9, 2020
58. "Stress distribution in a five-layer circular sandwich composite plate based on the third and hyperbolic shear deformation theories"
    mohammad shishesaz : First author, hamed raeesi : second author, Shapour Moradi : Third author
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.927-940, 2020
59. "Interfacial shear stress distribution in the adhesively bonded tubular joints under tension with a circumferential void or debond"
    mohammad shishesaz : First author, طهراني-سياوش : second author
    Journal of Adhesion Science and Technology, pp.1172-1205, 2020
60. "A Novel Theoretical Approach for Estimation of Axial Crushing Behavior of Polygonal Hollow Sections"
    احمد ملكشاهي : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author, Mohammad Hosseini : Fourth author
    International Journal of Applied Mechanics, pp.1-43, 2020
61. "Investigating peak stresses in fitting and repair patches of buried polyethylene gas pipes"
    reza khademi zahedi : First author, علي موري-پويان : second author, hooman Khademi Zahedi : Third author, mohammad shishesaz : Fourth author
    Frontiers of Structural and Civil Engineering, pp.147-168, 2020
62. "Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model"
    seyavosh hadad : First author, mohammad shishesaz : second author, Reza Mosalmani : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.341-357, 2019
63. "A concise review of nano-plates"
    mahdi mousavi khoram : First author, محمد حسيني : second author, mohammad shishesaz : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.420-429, 2019
64. "Stress distribution in a five-layer sandwich plate with FG face sheets using layerwise method"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1234-1244, 2019
65. "MECHANICAL BEHAVIOR OF FUNCTIONALLY GRADED NANO-CYLINDERS UNDER RADIAL PRESSURE BASED ON STRAIN GRADIENT THEORY"
    mohammad shishesaz : First author, محمد حسيني : second author
    JOURNAL OF MECHANICS, pp.441-454, 2019
66. "Nonlocal Elasticity Effect on Linear Vibration of Nano-circular Plate Using Adomian Decomposition Method"
    mohammad shishesaz : First author, mojtaba shariaty : second author, Amin Yaghootian : Third author
    Journal of Applied and Computational Mechanics, pp.63-76, 2019
67. "Static and dynamic axial crushing of prismatic thin-walled metal columns"
    احمد ملكشاهي : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.27-40, 2019
68. "AXIAL CRUSHING OF PRISMATIC MULTI-CORNER METAL COLUMNS CONSIDERING PLASTIC HARDENING AND CURVATURE"
    احمد ملكشاهي : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
    JOURNAL OF MECHANICS, pp.315-326, 2019
69. "Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads"
    moslem mohamadi : First author, Mohammad Hosseini : second author, mohammad shishesaz : Third author, Amin Hadi : Fourth author, Abbas Rastgoo : Author5
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, pp.1-23, 2019
70. "The effects of circumferential voids or debonds on stress distribution in tubular adhesive joints under torsion"
    mohammad shishesaz : First author, siavash tehrani : second author
    Journal of Adhesion, pp.1396-1430, 2019
71. "Nonlinear Vibration Analysis of Nano-Disks Based on Nonlocal Elasticity Theory Using Homotopy Perturbation Method"
    mohammad shishesaz : First author, mojtaba shariaty : second author, Amin Yaghootian : Third author, Ali Alizadeh : Fourth author
    International Journal of Applied Mechanics, pp.1-28, 2019
72. "کاربرد روش اجزای محدود در تحلیل تنش در لوله های گاز مدفون شده پلی اتیلنی"
    reza khademi zahedi : First author, mohammad shishesaz : second author
    Undergroun Space, pp.48-58, 2019
73. "Thermoelastic analysis of rotating functionally graded micro/nanodisks of variable thickness"
    محمد حسيني : First author, mohammad shishesaz : second author, Amin Hadi : Third author
    THIN-WALLED STRUCTURES, pp.508-523, 2019
74. "Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview"
    mohammad shishesaz : First author, محمد حسيني : second author
    Journal of Adhesion, pp.1053-1121, 2018
75. "A review on stress distribution, strength and failure of bolted composite joints"
    mohammad shishesaz : First author, محمد حسيني : second author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.415-429, 2018
76. "Design and analytical modeling of magneto-electromechanical characteristics of a novel magneto-electro-elastic vibration-based energy harvesting system"
    mohammad shishesaz : First author, ميثم موري شيرباني : second author, Hamid Mohammad-Sedighi : Third author, Ali Hajnayeb : Fourth author
    Journal of Sound and Vibration, pp.149-169, 2018
77. "A review of size-dependent elasticity for nanostructures"
    محمد حسيني : First author, Amin Hadi : second author, احمد ملكشاهي : Third author, mohammad shishesaz : Fourth author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.197-211, 2018
78. "The effect of viscoelasticity on the stress distribution of adhesively single-lap joint with an internal break in the composite adherends"
    Arash Reza : First author, mohammad shishesaz : second author
    Mechanics of Time-Dependent Materials, pp.373-399, 2018
79. "Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.233-252, 2017
80. "Analysis of functionally graded nanodisks under thermoelastic loading based on the strain gradient theory"
    mohammad shishesaz : First author, محمد حسيني : second author, Khosro Naderan Tahan : Third author, Amin Hadi : Fourth author
    Acta Mechanica, pp.4141-4168, 2017
81. "Parametric modeling of a novel longitudinal vibration‑based energy harvester using magneto‑electro‑elastic materials"
    ميثم موري شيرباني : First author, mohammad shishesaz : second author, Hamid Mohammad-Sedighi : Third author, Ali Hajnayeb : Fourth author
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, pp.5989-6004, 2017
82. "Size-Dependent Stress Analysis of Single-Wall Carbon Nanotube Based on Strain Gradient Theory"
    محمد حسيني : First author, Hamid Haghshenas Gorgani : second author, mohammad shishesaz : Third author, Amin Hadi : Fourth author
    International Journal of Applied Mechanics, pp.1-27, 2017
83. "Symmetric hole stress concentration in a hybrid composite lamina subjected to matrix plasticity†"
    pejman taghi pour bergani : First author, mohammad shishesaz : second author
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, pp.3337-3345, 2017
84. "Coupled magneto-electro-mechanical lumped parameter model for a novel vibration-based magneto-electro-elastic energy harvesting systems"
    ميثم موري شيرباني : First author, mohammad shishesaz : second author, Ali Hajnayeb : Third author, Hamid Mohammad-Sedighi : Fourth author
    PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, pp.158-169, 2017
85. "Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression"
    mohammad shishesaz : First author, Mahsa Kharazi : second author, parvaneh Hosseini : Third author, محمد حسيني : Fourth author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.111-122, 2017
86. "Generation of Low-Attenuation LambWave Modes in Three-Layer Adhesive Joints"
    pejman taghi pour bergani : First author, Sina Sodagar : second author, mohammad shishesaz : Third author
    International Journal of Acoustics and Vibration, pp.51-57, 2017
87. "Finite element study of three different treatment designs of a mandibular three implant-retained overdenture"
    mohammad shishesaz : First author, Asadollah Ahmadzadeh : second author, amin baharan : Third author
    Latin American Journal of Solids and Structures, pp.2826-2844, 2016
88. "Magneto-Elastic Analysis of an Annular FGM Plate Based on Classical Plate Theory Using GDQ Method"
    mohammad shishesaz : First author, Ali Zakipour : second author, Ayat Jafarzadeh : Third author
    Latin American Journal of Solids and Structures, pp.2436-2462, 2016
89. "Stress analysis of rotating nano-disks of variable thickness made of functionally graded materials"
    محمد حسيني : First author, mohammad shishesaz : second author, Khosro Naderan Tahan : Third author, Amin hadi : Fourth author
    Internationl journal of engineering science, pp.29-53, 2016
90. "Size-Dependent Dynamic Behavior and Instability Analysis of Nano-Scale Rotational Varactor in the Presence of Casimir Attraction"
    Hamid Mohammad-Sedighi : First author, ميثم موري شيرباني : second author, mohammad shishesaz : Third author, ali koochi : Fourth author, mohamadreza Abadian : Author5
    International Journal of Applied Mechanics, pp.1-16, 2016
91. "Investigation on Void Effect on Shear Stress Field in Bonded Stepped-Lap Joint"
    behnam ghodoos : First author, mohammad shishesaz : second author
    Latin American Journal of Solids and Structures, pp.331-343, 2016
92. "transient load concentration factor due to a sudden break of fibers in the viscoelastic PMC under tensile load"
    ARASH REZA : First author, mohammad shishesaz : second author
    international journal of solids and structures, pp.1-10, 2016
93. "The effect of fiber breakage on transient stress distribution in single-lap joint composite material"
    mohammad shishesaz : First author, saeed yaghobi : second author
    Journal of solid mechanics, pp.442-457, 2015
94. "Theoretical modeling of low-attenuation lamb wave modes generation in three-layer adhesive joints using angle beam transducer"
    pejman taghi pour bergani : First author, Khosro Naderan Tahan : second author, Sina Sodagar : Third author, mohammad shishesaz : Fourth author
    Latin American Journal of Solids and Structures, pp.461-476, 2015
95. "Investigation of Lamb waves attenuation in elastic–viscoelastic three-layer adhesive joints in low and high frequencies: Theoretical modeling"
    pejman taghi pour bergani : First author, Khosro Naderan Tahan : second author, Sina Sodagar : Third author, mohammad shishesaz : Fourth author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.1939-1952, 2015
96. "The Effect of Viscoelasticity on Creep Behavior of Double-Lap Adhesively Bonded Joints"
    Arash Reza : First author, mohammad shishesaz : second author, Khosro Naderan Tahan : Third author
    Latin American Journal of Solids and Structures, pp.35-50, 2014
97. "Stress Distribution in Single Lap Joints with a Cracked Composite Adherend—Part I: Single Lamina Adherends"
    mohammad shishesaz : First author, ARASH REZA : second author, MAJID DANIYALI : Third author
    Journal of Adhesion, pp.912-931, 2014
98. "Stress Distribution in Single Lap Joints with a Cracked Composite Adherend—Part II: Laminated Adherends"
    mohammad shishesaz : First author, Arash Reza : second author, MAJID DANIYALI : Third author
    Journal of Adhesion, pp.933-954, 2014
99. "THE EFFECT OF VOID SHAPE AND VOLUME FRACTION OF FIBERS ON THE STRESS DISTRIBUTION IN A LAMINATED COMPOSITE PLATE WITH TRIANGULAR FIBERS"
    Hamid Robati : First author, ali hafhparast : second author, mohammad shishesaz : Third author, peyman attar roshan : Fourth author
    mechanics of composite material, pp.155-164, 2014
100. "The Effect of Viscoelasticity on Creep Behavior of Double-Lap Adhesively Bonded Joints"
     Reza Arash : First author, mohammad shishesaz : second author, Khosro Naderan Tahan : Third author
     Latin American Journal of Solids and Structures, pp.35-50, 2014
101. "The effect of viscoelasticity of adhesives on shear stress distribution in a double-lap joint using analytical method"
     mohammad shishesaz : First author, Arash Reza : second author
     Journal of Adhesion Science and Technology, pp.2233-2250, 2013
102. "Geometrical Optimization of the Overlap in Mixed Adhesive Lap Joints"
     omid bavi : First author, navid bavi : second author, mohammad shishesaz : Third author
     Journal of Adhesion, pp.948-972, 2013
103. "The Effect of Viscoelasticity of Polymeric Adhesives on Shear Stress Distribution in a Single-Lap Joint"
     mohammad shishesaz : First author, Arash Reza : second author
     Journal of Adhesion, pp.859-880, 2013
104. "Shear stress distribution in adhesive layers of a double-lap joint with void or bond separation"
     mohammad shishesaz : First author, navid bavi : second author
     Journal of Adhesion Science and Technology, pp.1197-1225, 2013
105. "Applicability of Medium Density Polyethylene Gas Pipes in Hot climate Areas of South-west Iran"
     mohammad shishesaz : First author, محمد رضا شیشه‌ساز : نویسنده دوم
     Iranian Polymer Journal, pp.503-517, 2008
106. "Roll steer minimization of Mcpherson-strut suspension system using generic algoritm method"
     Hossen Habibi : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
     Mechanism and Machine Theory, 2007
107. "The effect of matrix bond failure stress distribution in short and long fibers of a hybrid composite lamina"
     mohammad shishesaz : First author
     International Journal of Engineering Science, pp.45-55, 2007
108. "The effect of matrix plasticity and duplicate cuts on stress distribution in short and long fibers of a hybrid composite lamina (perfect bond model)"
     mohammad shishesaz : First author
     Iranian Journal of Science and Technology, Transaction B: Engineering, pp.81-94, 2007
109. "The effect of mechanical and physical properties of polymers on stress amplification factor in composites with an internal damage"
     mohammad shishesaz : First author
     Iranian Polymer Journal, pp.429-439, 2005
110. "The Effect of Matrix Extension on Fiber Stresses And Matrix Debonding in a Hybrid Composite Monolayer"
     mohammad shishesaz : First author
     Iranian Journal of Science and Technology, Transaction B: Engineering, pp.253-263, 2001
111. "Stress Concentration in Fiber Composite Sheets Including Matrix Extension"
     j.n rastas : First author, mohammad shishesaz : second author
     Journal of Applied Mechanics, 1987

Conference Paper

1. "Simulation efect of a varying load on fatigue life of a micro gripper using ANSYS software"
   Mahta Bashirian : First author, mohammad shishesaz : second author, Meysam Saadat Bakhsh : Third author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
2. "Post-Buckling analysis of cracked axially functionally graded beams under compressive uniaxial load"
   Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
   The 7th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), 2020
3. "Buckling analysis of five layer sandwiched plate"
   mohammad shishesaz : First author, niloofar kordzadeh vali : second author, Reza Mosalmani : Third author
   Fifth Iranian research and technology conference in mechanical and electronic engineering, 2019
4. "Vibration analysis of a five layer sandwich plate based on first order shear deformation theory"
   mohammad shishesaz : First author, Shapour Moradi : second author, mohammadreza kardouni : Third author
   سومین کنفرانس ملی دانش و فناوری مهندسی برق, کامپیوتر و مکانیک ایران, 2019
5. "Magneto-thermo elastic analysis of a FGM circular plate resting on winkler elastic foundation using DQM"
   mohammad shishesaz : First author, mahdi mousavi khoram : second author
   Fifth international conference on applied research in electrical, mechanical and mechatronics engineering, 2019
6. "stress distribution in vehicle bumper composed of sandwich composites with woven face sheet at low velocity"
   مهرنوش كازروني : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
   3rd International Conference on Mehanical and Aerospace Engineering, 2018
7. "A Numerical Model for Circular Embedded Delamination Growth under in Plane Uniaxial Compressional Loading"
   محمد حسيني : First author, Mahsa Kharazi : second author, mohammad shishesaz : Third author
   International Conference on Mechanics of Advanced Materials and Equipment, 2018
8. "Application of DQM in bending and buckling of sandwich panel resting on elastic foundation"
   رضا شیرانی : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
   International Conference on Mechanics of Advanced Materials and Equipment, 2018
9. "Dynamic Response of Curved Woven Composite Panel to Underwater Blast"
   mohammad shishesaz : First author, سمانه سبحاني : second author, Reza Mosalmani : Third author
   International Conference on Mechanics of Advanced Materials and Equipment, 2018
10. "Model Updating of Watermelon Using Experimental Modal Analysis"
    مينا رخشي : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Second International Conference on Mechanical & Aerospace Engineering, 2017
11. "stress analysis and applicability of honycomb sandwich beams instead of steel bumper beams"
    Ahmad Mohseni parsa : First author, mohammad shishesaz : second author
    4th National Conference on the Mechanical Systems and Industrial Innovations, 2017
12. "Application of differential quadrature on buckling of clamped sandwich composite plate on an elastic foundation"
    mohammad shishesaz : First author, رضا شیرانی : second author
    4th National Conference on the Mechanical Systems and Industrial Innovations, 2017
13. "The application of Generalized Differential Quadrature Method in Free Vibration of Sandwich Plates on Elastic Foundation"
    عباس حاجي منفرد نژاد : First author, mohammad shishesaz : second author, SeyedAlireza SeyedRoknizadeh : Third author
    4th National Conference on the Mechanical Systems and Industrial Innovations, 2017
14. "Effect of vibration on the failure of blades in intermediate pressure stage of steam power plant"
    عيسي ايماني گلبوس : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Global conference on science and technology of mechanical and electrical engineering of Iran, 2016
15. "semi- analytical semi-numerical free vibration of welding rotor"
    hamed raeesi : First author, mohammad shishesaz : second author
    First national conference on interdiciplinary researches in computer, electrical, mechanical and mechatronics engineering, 2016
16. "Elasto-plastic analysis of nonsymmetric single lap joint under axial and bending"
    بهمن پرونداراسدالهي : First author, mohammad shishesaz : second author
    3rd National and First International Conference in Applied Research on Electrical, Mechanical and Mechatronics Engineering, 2016
17. "the effect on longitudinal stains in adhesive on stress distribution in a single lap joint under tension"
    mohammad shishesaz : First author, مجتبي حسن وند : second author
    3rd National and First International Conference in Applied Research on Electrical, Mechanical and Mechatronics Engineering, 2016
18. "the effect of trnsverse shear on stress distribution in a single lap joint under tension"
    mohammad shishesaz : First author, مجتبي حسن وند : second author
    3rd National and First International Conference in Applied Research on Electrical, Mechanical and Mechatronics Engineering, 2016
19. "the effect of adhesive thickness on stress distribution in a scarf joint"
    hosein madadi : First author, mohammad shishesaz : second author
    seventh national conference of mechanical engineering, 2015
20. "Analytical solution of peeling stress in a double lap joint"
    mohammad ali arjmandi : First author, mohammad shishesaz : second author, Afshin Ghanbarzadeh : Third author
    3rd NAtional conference on mechanical systems and industrial innovations, 2015
21. "buckling of clamped orthotropic symmetric sandwich plates under uniform compressive loead"
    mohammad shishesaz : First author, روح اله دريكوند : second author, سيد امين مهناپور : Third author
    3rd NAtional conference on mechanical systems and industrial innovations, 2015
22. "Analysis of possible weight reduction of a cooling tower fan"
    salman Aminimanesh : First author, mohammad shishesaz : second author
    3rd NAtional conference on mechanical systems and industrial innovations, 2015
23. "stress distribution in a woven single lap joint under axial and bending"
    mohammad shishesaz : First author, sajad zalaghi : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
24. "study of transverse shear effect in a single lap joint under bending moment"
    hesam Abbaszadeh : First author, mohammad shishesaz : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
25. "the effect of mechanical properties on stress distribution in a single lap joint under bending"
    mohammad hossein gharooni : First author, mohammad shishesaz : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
26. "synematic analysis of take off and braking in different kinds of De dion suspension"
    ahmad norozi : First author, Kourosh Heidari Shirazi : second author, mohammad shishesaz : Third author
    The 22nd annual international conference on mechanical engineering, 2014
27. "optimization of peeling stress in a single lap joint"
    mohammad shishesaz : First author, keyamehr rozbakhsh : second author, saeed yaghobi : Third author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
28. "Modal and stress analysis of composite blade of shahid modhej power plant cooling tower"
    salman Aminimanesh : First author, mohammad shishesaz : second author
    The 22nd annual international conference on mechanical engineering, 2014
29. "stress distribution in an unbalanced single lap joint composite under tension"
    meysam ahmadi joo : First author, mohammad shishesaz : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
30. "stress distribution in joints due to a pin in metal matrix composites"
    roghaye saberi : First author, mohammad shishesaz : second author, Mohammad Mehdi Attar : Third author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
31. "Analytical solution on shear stress distribution in lap joints under bending"
    mohammad shishesaz : First author, amin alizade : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
32. "loading effect due to fiber breakage in simple and hybrid composites"
    mohammad shishesaz : First author, saeed yaghobi : second author, keyamehr rozbakhsh : Third author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
33. "The effect of layer arrangement on stress optimization in a single lap joint under bending"
    hesam Abbaszadeh : First author, mohammad shishesaz : second author
    13th conference of Iranian aerospace society, 2014
34. "geomatric measurement and fllow simulation of cooling tower fan"
    salman Aminimanesh : First author, mohammad shishesaz : second author
    the first national conference of mechanical engineering of iran, 2014
35. "the effect of geometric and mechanical properties on stress distribution in a single lap joint under bending"
    mohammad hossein gharooni : First author, mohammad shishesaz : second author
    the first national conference of mechanical engineering of iran, 2014
36. "impact and thermalload analysis on the bone around implant in overdenture usinf finite element"
    moosa soleimanifar : First author, mohammad shishesaz : second author, Ebrahim Hajidavalloo : Third author
    The twentyth biomedical engineering conference, 2013
37. "determination of stress distribution in honycomb sandwich composite joints"
    mohammad salami : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
38. "determination of geometric propperties on stress distribution in honycomb structures"
    mohammad salami : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
39. "determenation of stress distribution due to fiber breakage in a composite material"
    mohammad shishesaz : First author, Shapour Moradi : second author, saeed yaghobi : Third author
    second national conference on mechanical systems and industrial innovations, 2013
40. "optimization of layer arrangement in single lap composites using genetic algorithm"
    hesam Abbaszadeh : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
41. "the effect of thermal and dynamic load on parts of an implant in over denture of lower jaw"
    moosa soleimanifar : First author, mohammad shishesaz : second author, Ebrahim Hajidavalloo : Third author
    second national conference on mechanical systems and industrial innovations, 2013
42. "stress analysis of a single lap joint under bending moment"
    hesam Abbaszadeh : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
43. "stress analysis of a single balanced lap joint undertension"
    meysam ahmadi joo : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
44. "optimization of layer arrangement in single lap joints under tension"
    meysam ahmadi joo : First author, mohammad shishesaz : second author
    second national conference on mechanical systems and industrial innovations, 2013
45. "optimization of peeling stress in symmetric lap joints"
    mohammad shishesaz : First author, Afshin Ghanbarzadeh : second author, keyamehr rozbakhsh : Third author
    second national conference on mechanical systems and industrial innovations, 2013
46. "The effect of moisture absorption, temperature change and transverse load on laminated cylindrical panels"
    Vahid Ebrahimizadeh : First author, mohammad shishesaz : second author, Kourosh Heidari Shirazi : Third author
    21st International Conference on Mechanical Engineering, 2013
47. "stress distribution around a pinned joint in ametal matrix composite materials"
    roghaye saberi : First author, mohammad shishesaz : second author
    The twelveth Iranianian Aerospace conference, 2013
48. "single and multiple object optimization of mutilayered composite materials with free edges"
    mohammad mansori : First author, mohammad shishesaz : second author
    The twelveth Iranianian Aerospace conference, 2013
49. "single and multiple object optimization of mutilayered composite materials with free edges"
    mohammad mansori : First author, mohammad shishesaz : second author
    The twelveth Iranianian Aerospace conference, 2013
50. "Stress distribution in woven composite joints"
    ali parsania : First author, mohammad shishesaz : second author
    The twelveth Iranianian Aerospace conference, 2013
51. "stress distribution in adhesively bonded woven composites"
    ali parsania : First author, mohammad shishesaz : second author
    The twelveth Iranianian Aerospace conference, 2013
52. "selection of best eleemnts in ANSYS on determination of stress fields in honycomb sandwich composites"
    mehdi veisi tabar : First author, mohammad shishesaz : second author, abbas rahi : Third author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
53. "stress distribution in adhesive joints with voids"
    mohammad shishesaz : First author, navid bavi : second author, omid bavi : Third author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
54. "transient stress distribution due to a crack in composites with viscoelastic matrix"
    mohammad shishesaz : First author, ARASH REZA : second author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
55. "sign sffect of poison's honycomb core ratio on stress fields in sandwich composites using finite element method"
    mehdi veisi tabar : First author, mohammad shishesaz : second author, abbas rahi : Third author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
56. "Optimal Control Designing for a Discrete Model of Helicopter in Hover"
    pedram masajedi : First author, Afshin Ghanbarzadeh : second author, mohammad shishesaz : Third author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
57. "Core material effect on crack growth in sandwich composites"
    mehdi veisi tabar : First author, mohammad shishesaz : second author, abbas rahi : Third author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
58. "International conference on mechanical engineering and advanced technology"
    mohammad shishesaz : First author, ARASH REZA : second author
    Internationl conference on Mecahanical Engineering and advanced technology ICMEAT 2012, 2012
59. "The effect of glue spew on stress distribution in lap joints"
    mohammad shishesaz : First author, navid bavi : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
60. "The effect of hybridization and plasticity on stress distribution arouna a hole in layered composites"
    mohammad shishesaz : First author, Mehdi Bagaee : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
61. "study of stress distribuin in implant bone for reatmentof lower jae overdenture using finite element method"
    mohammad shishesaz : First author, Asadollah Ahmadzadeh : second author, amin baharan : Third author
    20th annual International Iranian Mechanical Engineering Conference, 2012
62. "Stress distribution in adhesive joints of a metal matrix composite under tension"
    Morteza Movahedi : First author, mohammad shishesaz : second author
    conference on the mechanical systems simulation, 2012
63. "The effect of hony comb cores on stress distribution in sandwich structures"
    mehdi veisi tabar : First author, mohammad shishesaz : second author, abbas rahi : Third author
    conference on the mechanical systems simulation, 2012
64. "Stress analysis of last stage turbine blade"
    Gholamreza Mahmoodi zoorgani : First author, Shahram Shahrooi : second author, mohammad shishesaz : Third author
    conference on the mechanical systems simulation, 2012
65. "The effect of moisture absorption , temperature change on stress distribution in an unsymmetric composite laminate"
    Vahid Ebrahimizadeh : First author, mohammad shishesaz : second author
    conference on the mechanical systems simulation, 2012
66. "The effect of moisture absorbtion on stress didtribution in FGM plates"
    Omid Behnia : First author, mohammad shishesaz : second author
    conference on the mechanical systems simulation, 2012
67. "optimization of stacking sequence in a symmteric comoposite laminate"
    mohammad mehdi Tafarroj : First author, Afshin Ghanbarzadeh : second author, mohammad shishesaz : Third author
    conference on the mechanical systems simulation, 2012
68. "Fatigue analysis of harmonic drive gearbox"
    mahyar parvizi : First author, mohammad shishesaz : second author
    conference on the mechanical systems simulation, 2012
69. "stress distribution in non symmetric adhesive lap joint"
    mohammad shishesaz : First author, navid bavi : second author
    11th conference of Iranian Aerospace Society, 2012
70. "Stress distribution in a sandwich structure with different cores in presence of a crck in adhesive using FEM"
    mehdi veisi tabar : First author, mohammad shishesaz : second author, abbas rahi : Third author
    11th conference of Iranian Aerospace Society, 2012
71. "Analysis of Stress Field in the Hot Plate Weld Joint of a Buried Polyethylene Gas Pipe"
    mohammad shishesaz : First author, babak mehdipoor : second author
    Iran PipeTech 2011, 2011
72. "The effect of matrix plasticity on stress distribution around a hole in a laminated composite sheet with long fibers"
    mohammad shishesaz : First author, Mehdi Bagaee : second author
    19th annual Conference on Mechanical Engineering, 2011
73. "Stress distribution around a crack tip at the joint of PE gas pipes"
    mohammad shishesaz : First author, babak mehdipoor : second author
    19th annual Conference on Mechanical Engineering, 2011
74. "The effect if adhesive thickness and adherends on shear stress produced within the adhernd layer of a composite material"
    payam attar roshan : First author, mohammad shishesaz : second author, abbas haghparast : Third author
    10th conference of iranian aerospace society, 2011
75. "The effect id flaw geometry on stress distribution in laminated compositr with triangular ang rectangular cross sections"
    hosein robati : First author, Mohammad Mehdi Attar : second author, mohammad shishesaz : Third author
    IauMech2011 National conference on new technologies in Mechanical Engineering, 2011
76. "Analysis of effective parameters on behavior of a woven composite material under uniaxial and biaxial load along with material behavior under a weft rupture"
    mohammad shishesaz : First author, ghasem mohammadi fath : second author
    IauMech2011 National conference on new technologies in Mechanical Engineering, 2011
77. "determination of the effective parameters and rupture of plies on stress field in a woven composite material and"
    mohammad shishesaz : First author, ghasem mohammadi fath : second author
    3rd National Conference of Mechanical Engineering-NCME2010, 2010
78. "Study of stress concentration on bead part of a lap joint in hot welding processof polyethylene pipe and its effect on reduction of weld strength"
    mohammad shishesaz : First author, babak mehdipoor : second author
    The 10 Iranian Conference of Manufacturing Engineering inBabol Noshirvan University of Technology, 2010
79. "Analytical study of shear deformation on a laminated unbalanced composite plate"
    mohammad shishesaz : First author, ARASH REZA : second author, pejman taghi pour bergani : Third author
    ninth conference of iranian aerospace society, 2010
80. "The of fiber spacing on 3-dimensional stress distribution within a laminate with new triangular fibers"
    mohammad shishesaz : First author, Hossen Reiaee : second author
    ninth conference of iranian aerospace society, 2010
81. "The effect of crack emanating from a pin in a composite material"
    mohammad shishesaz : First author, mohammedmahdi Atar : second author
    ninth conference of iranian aerospace society, 2010
82. "Hybridization effect on dynamic response of c composite lamina subjected to a crack"
    mohammad shishesaz : First author, Aargane Mershakari : second author
    ninth conference of iranian aerospace society, 2010
83. "Study of Thermal and Mechanical Stresses in Ring and Piston of PRIDE Engine"
    mohammad shishesaz : First author, ALI POORHEMATI : second author
    Second international conference on manufaturing, 2009
84. "Study of Beam Behavior under a Transverse Impact Load from a Particle Using Shear Theory"
    mohammad shishesaz : First author, Khosro Naderan Tahan : second author, Mesam Kalami : Third author
    Second international conference on manufaturing, 2009
85. "Designing pipe cross transfer system and comparison the accuracy of manual solving with soft wares"
    mohammad shishesaz : First author, ABDOLRAHIM SAJEDI NEJAD : second author, seid jalal salehi : Third author
    2ND IRANIAN PIPE AND PIPELINE CONFERENCE, 2009
86. "Calculation of Plastic Strains in Kinematic Hardening Materials"
    Khosro Naderan Tahan : First author, mohammad shishesaz : second author, Mosstafai Goodarzi : Third author
    Iranian Conference on Manufacturing Engineering - ICME2009, 2009
87. "Dynamic transient stress distribution within three dimensional compasites subjected to an internal crack"
    mohammad shishesaz : First author, Aargane Mershakari : second author
    The 8th annual (international conference of iranian aerospace society, 2009
88. "احتساب پلاستيسيته در ماتريس بر تمركز تنش در اطراف يك سوراخ در مواد مركب تك لايه با الياف بلند"
    taghi pourbeigani : First author, mohammad shishesaz : second author
    هفتمین همایش انجمن هوا فضای ایران, 2008
89. "بررسي تنش در جوش ريل‌هاي U33 و UIC60 به منظور تخمين عمرجوش در بارگذاري خستگي"
    mohammad shishesaz : First author
    کنفرانس ملی مهندسی ساخت و تولید(اسفندماه), 2007
90. "تحليل استاتيكي تنش در لوله‌هاي الياف شيشه‌اي تقويت شده مدفون در زمين"
    hadan ghanitos : First author, mohammad shishesaz : second author
    کنفرانس ملی مهندسی ساخت و تولید(اسفندماه), 2007
91. "تجزيه و تحليل توليد توان در توربين‌هاي بادي با محور عمودي و تعيين نحوه كاهش نوسانات توان خروجي"
    mohammad shishesaz : First author, asmeal aze : second author
    پنجمین همایش ملی انرژی (نقش بازار رقابتی در ارتقاء کارایی انرژی) اردیبهشت‌ماه, 2005
92. "بررسي علل تركيدگي لوله‌هاي نازك تقويت شده پلي اتيلني و تعيين منحني‌هاي لازم در طراحي"
    mohammad shishesaz : First author, MAHAMED SEASAS : second author, mohammad shishesaz : Presnter
    اولین کنفرانس سازه‌های جدار نازک ایران, 2002
93. "طراحي ، محاسبه ، ساخت، نصب و راه اندازي ماشين Wheel Track"
    seyed abbsi Tabatabaie : First author, mohammad shishesaz : second author
    اولین کنفرانس علمی - تخصصی انجمن مهندسان راه و ساختمان ایرانaa, 1999
94. "Estimation of burst pressure of type IV composite pressure vessels using various damage crtiteria for different composite layup"
    يونس نظريان : First author, Reza Mosalmani : second author, mohammad shishesaz : Third author
    The 9th International Conference on Composites: Characterization, Fabrication and Application, 2024
95. "Developing a micromechanical model to predict the elastic properties of plain weave composites"
    اميرمحمد قنواتي : First author, Reza Mosalmani : second author, mohammad shishesaz : Third author
    The 8th International Conference on Composites: Characterization, Fabrication and Application (CCFA-8), 2022
96. "Modeling and analysis of thermoplastic composite pipe under tensile loading"
    Mehday Bahrami : First author, Reza Mosalmani : second author, mohammad shishesaz : Third author
    The 8th International Conference on Composites: Characterization, Fabrication and Application (CCFA-8), 2022
97. "Stress Analysis and Fluid Solution of the Nozzles of the Elliot DYR Steam Turbine"
    hamed raeesi : First author, mohammad shishesaz : second author
    Fifth international conference on applied research in electrical, mechanical and mechatronics engineering, 2019
98. "Prediction of Temperature-Dependent Mechanical Properties of Epoxy"
    mohammad shishesaz : First author, ali agheli : First author, Reza Mosalmani : second author
    (The 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA, 2018
99. "Nonlocal elasticity effect on Linear Axisymmetric Vibration of Nano-disks using Adomian decomposition method"
    mohammad shishesaz : First author, mojtaba shariaty : second author, Amin Yaghootian : Third author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
100. "Nonlinear Vibration Analysis of Nano-disks Based on Nonlocal elasticity Theory Using Variational Iteration Method"
     mohammad shishesaz : First author, mojtaba shariaty : second author, Ali Alizadeh : Third author
     International Conference on Mechanics of Advanced Materials and Equipment, 2018
101. "Nonlinear Vibration Analysis of Nano-disks Based on Nonlocal elasticity Theory Using Homotopy Perturbation method"
     mohammad shishesaz : First author, Amin Yaghootian : second author, Ali Alizadeh : Third author, mojtaba shariaty : Fourth author
     International Conference on Mechanics of Advanced Materials and Equipment, 2018
102. "Limit angular speed and onset of yield for FGM rotating disks based on von Mises yield criterion"
     mohamad zamani nezhad : First author, Amin Hadi : second author, محمد حسيني : Third author, mohammad shishesaz : Fourth author
     International Conference on Mechanics of Advanced Materials and Equipment, 2018
103. "The Effect of Patch Repair on Stress Distribution in a Damaged Polyethylene Gas Pipe"
     mohammad shishesaz : First author, reza khademi zahedi : second author, Ebrahim Esmaeili : Third author
     The international Conference on New Research in Industry and Mechanical Engineering, 2015
104. "An investigation on butted regions in an adhesively-bonded stepped-lap joint with composite and metal adherends"
     behnam ghodoos : First author, mohammad shishesaz : second author
     the first national conference of mechanical engineering of iran, 2014
105. "OPTIMAL CONTROL DESIGNING FOR A DISCRETE MODEL OF HELICOPTER IN HOVER"
     pedram masajedi : First author, Afshin Ghanbarzadeh : second author, mohammad shishesaz : Third author
     International Conference on Control Engineering and Communication Technology (ICCECT 2012), 2012
106. "THE EFFECT OF FIBER ARRANGEMENT ON STRESS CONCENTRATION AROUND A PIN IN A LAMINATED COMPOSITE JOINT"
     mohammad shishesaz : First author, mohammedmahdi Atar : second author, Hossen Reiaee : Third author
     ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), 2010
107. "DERIVATION OF KINEMATIC RELATIONS AND FINITE ELEMENT STRESS ANALYSIS OF FLEXSPLINE IN A HARMONIC DRIVE GEARBOX"
     mohammad shishesaz : First author
     ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), 2010
108. "Stress Concentration Analysis of Fiber-Reinforced Multilayered Composites with Two Serial Pin-Load Holes"
     mohammad shishesaz : First author, Mohammad Mehdi Attar : second author
     18th annual international conference on mechanical engineering, 2010
109. "Hybridization Effect on Stress Distribution in Short Fiber Composite Monolayers of Finite Width"
     mohammad shishesaz : First author, mohammad shishesaz : Presnter
     'CSME Mechanical Engineering Forum 1990, 1990
110. "Stress Analysis in Fiber Composite Monolayers with Broken Fibers Using a Modified Model"
     mohammad shishesaz : First author, G.N RASTEN : second author
     'SEXTAM XIII Proceedings, 1986, 1986