Journal Paper

1. "A Comparative FEM Analysis of a Substituted 3D-Printed U-Joint with PLA and ABS Materials"
   Mohammad Sajjad Mahdieh : First author, Golshid Fathinasab : second author
   International Journal of Advanced Design and Manufacturing Technology, pp.11-18, 2025
2. "Investigation of Steel Slabs Marker Robotic Arm Control Parameters in Noise and Disturbance Absence/Presence"
   Mohammad Sajjad Mahdieh : First author
   Journal of Modern Processes in Manufacturing and Production (MPMP Journal), pp.85-96, 2024
3. "Investigating of Manufacturing of Titanium Hip Prosthesis by Cold Forging Process via FEM Analysis"
   Mohammad Sajjad Mahdieh : First author, Farshad Nazari : second author, خالد شليج زايد : Third author, Fatemeh Aghoon : Fourth author
   Journal of Modern Processes in Manufacturing and Production (MPMP Journal), pp.5-16, 2024
4. "Design of forks and lifting system of a 10-ton forklift truck by FEM simulation"
   Mohammad Sajjad Mahdieh : First author, Farshad Nazari : second author, فاضل عباس غليم : Third author
   Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, pp.59-67, 2024
5. "A Study on The Effects of Different Pad Materials on Brake System Performance of a High-Capacity Elevator by FEM Simulation"
   Mohammad Sajjad Mahdieh : First author, Farshad Nazari : second author, علي رياض خير الله : Third author
   International Journal of Advanced Design and Manufacturing Technology, pp.61-68, 2024
6. "A study on stamping of airliner’s tail connector part through FEM simulation"
   Mohammad Sajjad Mahdieh : First author, Farshad Nazari : second author, طيف احمد موسي : Third author, Hossein Torfi Salehi : Fourth author
   Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, pp.5-13, 2023
7. "Improving surface integrity of electrical discharge machined ultra-fined grain Al-2017 by applying RC-type generator"
   Mohammad Sajjad Mahdieh : First author
   Proceedings of the Institution of Mechanical Engineers, Part E:Journal of Process Mechanical Engineering, 2023
8. "Improving surface roughness in barrel finishing process using supervised machine learning"
   Mohammad Sajjad Mahdieh : First author, مهدي بخشي زاده : second author, Amirhosseien Zare Reisabadi : Third author
   Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, pp.5-15, 2023
9. "Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation"
   Mohammad Sajjad Mahdieh : First author, Ashkan Monjezi : second author, MohammadReza Zare Reisabadi : Third author
   Iranian Journal of Materials Forming, pp.5-12, 2022
10. "Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation"
    Mohammad Sajjad Mahdieh : First author, MohammadReza Steki : second author
    Journal of Modern Processes in Manufacturing and Production (MPMP Journal), pp.71-84, 2022
11. "Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process"
    Ali Vakili Sohrforozani : First author, Masoud Farahnakian : second author, Mohammad Sajjad Mahdieh : Third author, Amir Masud Behagh : Fourth author, Omid Behagh : Author5
    International Journal of Advanced Design and Manufacturing Technology, pp.75-82, 2020
12. "The surface integrity of ultra-fine grain steel, Electrical discharge machined using Iso-pulse and resistance–capacitance-type generator"
    Mohammad Sajjad Mahdieh : First author
    Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pp.1-10, 2020
13. "A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process"
    Ali Vakili Sohrforozani : First author, Masoud Farahnakian : second author, Mohammad Sajjad Mahdieh : Third author, Amir Masud Behagh : Fourth author, Omid Behagh : Author5
    Journal of Modern Processes in Manufacturing and Production (MPMP Journal), pp.27-39, 2019
14. "Recast layer and heat-affected zone structure of ultra-fined grained low carbon steel machined by electrical discharge machining"
    Mohammad Sajjad Mahdieh : First author
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, pp.1-12, 2019
15. "Effects of electro-discharge machining process on ultra-fined grain copper"
    Mohammad Sajjad Mahdieh : First author, Sara Zare-Reisabadi : second author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.1-9, 2018
16. "A study of stored energy in ultra-fined grained aluminum machined by electrical discharge machining"
    Mohammad Sajjad Mahdieh : First author, RamezanAli Mahdavinejad : second author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.4470-4478, 2017
17. "Comparative Study on Electrical Discharge Machining of Ultrafine-Grain Al, Cu, and Steel"
    Mohammad Sajjad Mahdieh : First author, RamezanAli Mahdavinejad : second author
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.6237-6247, 2016
18. "Recast layer and micro-cracks in electrical discharge machining of ultra-fine-grained aluminum"
    Mohammad Sajjad Mahdieh : First author, RamezanAli Mahdavinejad : second author
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, pp.428-437, 2016
19. "Investigation of variance of roller burnishing parameters on surface quality by Taguchi approach"
    Ehsan Rafati : First author, Mohammad Sajjad Mahdieh : second author
    International Journal of Advanced Design and Manufacturing Technology, pp.77-81, 2013
20. "Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel"
    Payam Saraeian : First author, Mahdi Gholami : second author, Amir Masud Behagh : Third author, HamidReza JavadiNejad : Fourth author, Mohammad Sajjad Mahdieh : Author5
    International Journal of Advanced Design and Manufacturing Technology, pp.1-6, 2013

Conference Paper

1. "Investigating the effect of roller rotation speed on power consumption in beam rolling process"
   عليرضا بينا : First author, Reza Mosalmani : second author, Mohammad Sajjad Mahdieh : Third author, Farshad Nazari : Fourth author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
2. "مقایسه پاسخ مدل های پلاستیسیته مبتنی بر دما و نرخ کرنش در تحلیل عددی فرآیند نورد گرم تیر I شکل"
   عليرضا بينا : First author, Reza Mosalmani : second author, Mohammad Sajjad Mahdieh : Third author, Farshad Nazari : Fourth author
   24th annual symposium on steel 140, 2022
3. "Changing the mechanical properties of ST37 Steel bar by imposing different Cooling Media on production line"
   Mohammad Sajjad Mahdieh : First author, Mohammad Dehkhoda : second author
   Seventh international Conference on Knowledge and Technology of Mechanical, Electrical Engineering and Computer Of Iran, 2022
4. "comparative study on surface roughness, micro structure and hardness of stainless steel S302 cut by Laser and waterjet"
   Mohammad Sajjad Mahdieh : First author, Mostafa Madani : second author
   ISME 2020 28th Annual International Conference of Iranian Society of Mechanical Engineers 27-29 May 2020- Tehran- Amirkabir University of Technology, 2020