Journal Paper

1. "Numerical simulation of the dry gas seal of a centrifugal compressor"
   زهرا سجاديان : First author, Mohammad Reza Saffarian : second author, Seyed Saied Bahrainian : Third author
   مجله مهندسی مکانیک دانشگاه تبریز, pp.173-181, 2021
2. "Effect of impeller and scroll spacing on flow characteristics of electrical submersible pump"
   Seyed Saied Bahrainian : First author, امين محمدي : second author, Mohammad Reza Saffarian : Third author
   مجله مهندسی مکانیک دانشگاه تبریز, pp.21-29, 2021
3. "Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator"
   سارا طاهري پور : First author, Mohammad Reza Saffarian : second author, Alireza Daneh-Dezfuli : Third author
   journal of Solids and Fluids, pp.203-216, 2019
4. "Numerical Study of the Mixed Convection and the Entropy Generation in a Rhombic Enclosure Filled with the Cu-Water Nanofluid with the Heat Absorption/ Generation"
   Abdollah Mansory Mehrian : First author, Mohammad Reza Saffarian : second author, Zafar Namazian : Third author, Farshad Moradi Kashkoli : Fourth author
   مجله مهندسی مکانیک دانشگاه تبریز, pp.289-298, 2019
5. "Optimization of energy consumption in fire-tube boilers by genetic algorithm"
   Hashem Fajr : First author, Mohammad Reza Saffarian : second author
   The Quarterly Journal of Applied Science in Engineering Studies, pp.9-19, 2018
6. "Modeling and optimization of methanol fuel cells"
   Mohammad Reza Saffarian : First author, مدثر-اميرمسعود : second author
   Journal of new technologies in energy systems, pp.28-37, 2015
7. "Experimental investigation of a hemispherical solar collector performance with helical risers by using Ag–CuO/water hybrid nanofluid"
   reza nasiri : First author, Mohammad Reza Saffarian : second author, Mojtaba Moravej : Third author
   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.1-17, 2024
8. "Modeling and Design of a Multistream Plate-Fin Heat Exchanger in the Air Separation Units by Pinch Technology"
   الیاسین نزار : First author, Salem Mehrzad : second author, Mohammad Reza Saffarian : Third author
   International Journal of Chemical Engineering, pp.1-16, 2023
9. "TURBULENT FLOW SIMULATION OF THE NONNEWTONIAN FLUIDS THROUGH A POROUS MEDIUM USING LES TURBULENCE MODEL"
   سارا طاهري پور : First author, فاطمه غلامي ملك اباد : second author, Amirhossein Khayyaminejad : Third author, Mohammad Reza Saffarian : Fourth author
   SPECIAL TOPICS & REVIEWS IN POROUS MEDIA-AN INTERNATIONAL JOURNAL, pp.21-41, 2023
10. "An investigation of multistream plate-fin heat exchanger modelling and design: a review"
    الیاسین نزار : First author, Salem Mehrzad : second author, Mohammad Reza Saffarian : Third author
    Kerntechnik, pp.1-18, 2023
11. "Investigation of thermal characteristics and entropy generation in a solar collector including Fly Ash-Cu hybrid nanofluids: Numerical approach using mixture model"
    نوشين عظيمي : First author, Mohammad Reza Saffarian : second author
    Engineering Analysis with Boundary Elements, pp.169-184, 2023
12. "Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎"
    Reza Bahoosh Kazerooni : First author, milad rohani : second author, Mohammad Reza Saffarian : Third author
    Journal of Applied and Computational Mechanics, pp.346-356, 2023
13. "Numerical evaluation of the effect of using various twisted‑tape geometries on heat transfer enhancement and flow characteristics in a tube"
    سارا طاهري پور : First author, Mohammad Reza Saffarian : second author, نوشين عظيمي : Third author, Mehrsa Aghajari : Fourth author
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.1-16, 2023
14. "Design of the Multistream Plate-Fin Heat Exchanger in the Air Separation Units"
    الیاسین نزار : First author, Salem Mehrzad : second author, Mohammad Reza Saffarian : Third author
    International Journal of Heat and Technology, pp.187-196, 2023
15. "Investigating the possibility of using the turbo-expander for natural gas pressure reduction stations"
    abdolrahiim mogadam dezfoli : First author, Mohammad Reza Saffarian : second author
    Thermophysics and Aeromechanics, pp.185-195, 2022
16. "Experimental and numerical investigation on development of a method for measuring the rate of natural gas leakage"
    abdolrahiim mogadam dezfoli : First author, Mohammad Reza Saffarian : second author, Morteza Behbahani-Nejad : Third author, Maziear Changizian : Fourth author
    Journal of Natural Gas Science and Engineering, pp.1-15, 2022
17. "Thermal performance analysis of a flat‑plate solar heater with zigzag‑shaped pipe using fly ash‑Cu hybrid nanofluid: CFD approach"
    نوشين عظيمي : First author, Mohammad Reza Saffarian : second author, Aminreza Noghrehabadi : Third author
    Environmental Science and Pollution Research, pp.1-19, 2022
18. "Investigating the entropy generation around an airfoil in turbulent flow"
    Mohammad Reza Saffarian : First author, فرزاد جماعتي : second author, امين محمدي : Third author, فاطمه غلامي ملك اباد : Fourth author, كسري ايوبي ايوبلو : Author5
    Aircraft Engineering and Aerospace Technology, pp.1001-1009, 2020
19. "Experimental investigation of circular flat-panel collector performance with spiral pipes"
    Mojtaba Moravej : First author, Mohammad Reza Saffarian : second author, Larry K. B. Li : Third author, Mohammad Hossein Doranehgard : Fourth author, Qingang Xiong : Author5
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.1229-1236, 2020
20. "Investigating the possibility of increasing cooling air flow in a hydrogenerator rotor fan"
    mohammadmehdi behravesh : First author, Mohammad Reza Saffarian : second author, Seyed Saied Bahrainian : Third author
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.1-14, 2020
21. "Experimental study of an air humidity absorption cycle based on the MHI"
    رضا مرادي : First author, Mohammad Reza Saffarian : second author, Morteza Behbahani-Nejad : Third author
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.3613-3621, 2020
22. "Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid"
    Mohammad Reza Saffarian : First author, Mojtaba Moravej : second author, Mohammad Hossein Doranehgard : Third author
    Renewable Energy, pp.2316-2329, 2020
23. "Numerical and Experimental Investigation of the Effect of Air Conditioning Duct on the Room Temperature Distribution and Energy Efficiency"
    ابوالفضل دلاوري : First author, Ghodrat Ghassabi : second author, Mohammad Reza Saffarian : Third author
    Journal of Brazilian Society of Mechanical Sciences and Engineering, pp.1-8, 2020
24. "Experimental Investigation of Sediment Accumulation Reduction in Reservoirs Due to Turbidity Currents with Channel Insertion at the Entrance"
    اكبري زاده ويسي-ميلاد : First author, Mohammad Reza Saffarian : second author, Mehdi Ghomeshi : Third author
    International Journal of Civil Engineering, pp.37-47, 2020
25. "Numerical simulation of particle-laden flow in an industrial wastewater sedimentation tank"
    سعيد وحيدي فر : First author, Mohammad Reza Saffarian : second author, Ebrahim Hajidavalloo : Third author
    Meccanica, pp.2367-2383, 2019
26. "Entropy generation in the intake pipe of an internal combustion engine"
    Mohammad Reza Saffarian : First author, Reza Bahoosh Kazerooni : second author, Mohammad Hossein Doranehgard : Third author
    The European Physical Journal Plus, pp.1-12, 2019
27. "Heat transfer simulation in an industrial journal bearing using VOF method"
    سارا طاهري پور : First author, Mohammad Reza Saffarian : second author, Alireza Daneh-Dezfuli : Third author
    Journal of Brazilian Society of Mechanical Sciences and Engineering, pp.1-13, 2019
28. "Energy and Exergy Analyses of a Diesel Engine Running on Biodiesel Fuel"
    Reza Bahoosh Kazerooni : First author, mohmmad sade ghahfarokhi : second author, Mohammad Reza Saffarian : Third author
    Journal of Heat and Mass Transfer Research, pp.95-104, 2018
29. "Introducing the theory of successful settling in order to evaluate and optimize the sedimentation tanks"
    سعيد وحيدي فر : First author, Mohammad Reza Saffarian : second author, Ebrahim Hajidavalloo : Third author
    Meccanica, pp.3477-3493, 2018
30. "Effects of different roughness elements on friction and pressure drop of laminar flow in microchannels"
    فخرالدين لله گاني : First author, Mohammad Reza Saffarian : second author, احمدرضا مرادي : Third author, ابراهيم طاوسي : Fourth author
    International Journal of Numerical Methods for Heat & Fluid Flow, pp.1664-1683, 2018
31. "Investigating the possibility of using the underground tunnel for air-conditioning in Tehran"
    محمد ناظرنژاد : First author, Mohammad Reza Saffarian : second author, Morteza Behbahani-Nejad : Third author
    Journal of Brazilian Society of Mechanical Sciences and Engineering, pp.473-473, 2018
32. "ENTROPY GENERATION OF PSEUDO-PLASTIC NON-NEWTONIAN NANOFLUIDS IN CIRCULAR DUCT UNDER CONSTANT WALL TEMPERATURE"
    عليرضا فلاحت : First author, Mohsen Shabani : second author, Mohammad Reza Saffarian : Third author
    Journal of Mechanical Engineering and Technology, pp.1-10, 2018
33. "Non-Newtonian Shear-Thinning Fluid Passing Through a Duct with an Obstacle, Using a Power Law Model"
    Mohammad Reza Saffarian : First author, mona mohammadi : second author, Mohammad Reza Mohammadi : Third author
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, pp.594-600, 2015
34. "Optimal design of plate-fin heat exchangers by a Bees Algorithm"
    hoseyn zare : First author, Farshad Moradi Kashkooli : second author, abdollah mansori : Third author, Mohammad Reza Saffarian : Fourth author, esmael namvar : Author5
    Applied Thermal Engineering, pp.267-277, 2014
35. "Evaluation of sensitization in gas tungsten arc welded AISI 304 stainless steel"
    mohsan roshabni : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Mohammad Reza Saffarian : Fourth author
    Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, pp.207-215, 2014
36. "Entropy analysis for nanofluid flow over a stretching sheet in the presence of heat generation/absorption and partial slip"
    aminreza noghrehabadi : First author, Mohammad Reza Saffarian : second author, rashid pourrajab : Third author, Mohammad Ghalambaz : Fourth author, Mohammed Galmbaz : Fourth author
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, pp.927-937, 2013
37. "Experimental investigation on the effect air–fuel ratio on cycle-to-cycle variations of SI combustion and performance parameters"
    mohmmad sade ghahfarokhi : First author, Reza Bahoosh Kazerooni : second author, Mohammad Reza Saffarian : Third author
    Majlesi Journal of Electrical Engineering, pp.22-29, 2012
38. "Numerical simulation of a secondary clarifier in a sewage treatment plant using modified Bingham Model"
    Mohammad Reza Saffarian : First author, Mohammad Hossein Hamedi : second author, Mehrzad Shams : Third author
    Canadian Journal of Civil Engineering, pp.11-22, 2011

Conference Paper

1. "Design of gas solar ejector cooling system suitable for hot and dry climate"
   رضا سعيدي سرقلعه : First author, Maziear Changizian : second author, Mohammad Reza Saffarian : Third author, Mostafa Kiani Deh Kiani : Fourth author
   the 9th International Conference on Technology and Energy Management, 2024
2. "The effect of modifying the geometry of the standing air curtain refrigerator on its energy consumption"
   مسلم احمدي بلوطکي : First author, Mohammad Reza Saffarian : second author, Ebrahim Hajidavalloo : Third author, Omid Adibi : Fourth author, Saeed Mohaghegg Dolatabadi : Author 5
   The 18th National Conference of Electrical, Computer and Mechanical Engineering, 2023
3. "Investigating the entropy production due to temperature and pressure in elbow mixing with continuous output"
   امين رزيج : First author, Mohammad Reza Saffarian : second author
   The 31th Annual International Conference of the Iranian Association of Mechanical Engineers and the 9th Conference on Thermal Power Plants, 2023
4. "Investigation of entropy production in a pipe including obstacles with a triangular cross section at two different angles"
   نوشين عظيمي : First author, Mohammad Reza Saffarian : second author
   29th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plant, 2021
5. "Determine the minimum distance between two pipes of parallel arrangement in air-to-ground cooling exchangers during 24-hour operation"
   محمد ناظرنژاد : First author, Mohammad Reza Saffarian : second author
   ISME 2020 28th Annual International Conference of Iranian Society of Mechanical Engineers 27-29 May 2020- Tehran- Amirkabir University of Technology, 2020
6. "شبیه‌سازی جریان دو فاز روغن و هوا دریاتاقان یک نیروگاه برق‌آبی"
   سارا طاهري پور : First author, Mohammad Reza Saffarian : second author, Alireza Daneh-Dezfuli : Third author
   The 2nd national conference on modern approaches in mechanical engineering, 2017
7. "Simulation of cooling air flow in the rotor fan of Hydro generator of Karun dam"
   mohammadmehdi behravesh : First author, Mohammad Reza Saffarian : second author, Seyed Saied Bahrainian : Third author
   Second International Conference on Mechanical & Aerospace Engineering, 2017
8. "Analysis of the performance of the earth cooling exchanger for air conditioning of the office buildings and the industrial spaces"
   محمد ناظرنژاد : First author, Mohammad Reza Saffarian : second author, Morteza Behbahani-Nejad : Third author
   2nd International Conference on Mechanical and Aerospace Engineering, 2017
9. "Two-dimensional simulation of non-premixed compression ignition process and the effect of air temperature and velocity of methane and air in the combustion process"
   رضا مرادي : First author, صابر عادل نژاد : second author, Mohammad Reza Saffarian : Third author
   دومین کنفرانس بین المللی دستاوردهای نوین پژوهشی در مکانیک، صنایع و هوافضا, 2016
10. "رویکرد جدید در تحلیل هیدردینامیکی شبکه‌های تهویه با استفاده از روش تئوری خطی"
    Morteza Behbahani-Nejad : First author, محمدحسن لطفيان اكبرابادي : second author, Mohammad Reza Saffarian : Third author
    دومین کنفرانس بین المللی دستاوردهای نوین پژوهشی در مکانیک، صنایع و هوافضا, 2016
11. "Numerical Analysis of geometrical parameters and operating conditions on the performance of liquid - gas jet pump"
    aminreza noghrehabadi : First author, Mohammad Reza Saffarian : second author, سلطاني-محمد : Third author
    The Third International Conference on Commercialization, National Development and Engineering Sciences, 2015
12. "Experimental Investigation of the Sedimentation in the dam's reservoirs by inserting channel at the inlet of the reservoir"
    اكبري زاده ويسي-ميلاد : First author, Mohammad Reza Saffarian : second author, Mehdi Ghomeshi : Third author
    Water Eng., 2015
13. "Methods of obtaining the trapezoidal aerodynamics wing center and stability in a small twin boom UAV"
    نيسي مينايي-سمير : First author, Mohammad Reza Saffarian : second author
    The international Conference on New Research in Industry and Mechanical Engineering, 2015
14. "Methods of obtaining the trapezoidal aerodynamics wing center and stability in a small twin boom UAV"
    نيسي مينايي-سمير : First author, Mohammad Reza Saffarian : second author
    The international Conference on New Research in Industry and Mechanical Engineering, 2015
15. "Three-dimensional simulation of drilling mud in the eccentric rotating pipe"
    مرضيه نادران طحان : First author, Mohammad Reza Saffarian : second author
    چهارمین همایش ملی مهندسی مخازن هیدروکربوری و صنایع بالادستی، علوم و صنایع وابسته, 2015
16. "The effect of the different components of natural gas on the dew point curve"
    علي جلودارناصري : First author, Morteza Behbahani-Nejad : second author, Mohammad Reza Saffarian : Third author, Ehsan Taheri : Fourth author
    The Third International Conference Oil. Gas, Refining & Petrochemical with Focous Relationship between Goverment, University and Industry, 2015
17. "Simulation of pulse cryogenic with adiabatic and constant heat flux boundary condition"
    Reza Bahoosh Kazerooni : First author, Mohammad Reza Saffarian : second author, Mehdi Poorshams : Third author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
18. "Checking the allowable number of start and stop of a gas turbine in a maintenance with the condition monitoring of the first row of moving blades rotor of hot gas generator"
    yaser Hashemi Nezhad : First author, Mohammad Reza Saffarian : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
19. "Evaporative Coolers Optimization"
    لك-صغري : First author, Mohammad Reza Saffarian : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
20. "Flow simulation of the outside unit of a split cooler"
    Farshad Moradi Kashkooli : First author, Seyed Saied Bahrainian : second author, Mohammad Reza Saffarian : Third author
    the first national conference of mechanical engineering of iran, 2014
21. "شبیه‌سازی جریان در واحد بیرونی یک کولر گازی دو تکه"
    Farshad Moradi Kashkooli : First author, Seyed Saied Bahrainian : second author, Mohammad Reza Saffarian : Third author
    the first national conference of mechanical engineering of iran, 2014
22. "Hybrid gas turbine and fuel cell thermo- economic optimization"
    Mohammad Reza Saffarian : First author, مدثر-اميرمسعود : second author, اصل سعيدي پور - سينا : Third author
    3rd National Conference of Fuel, Energy & Environment, 2013
23. "Investigation of Cycle Changes in Spark Ignition Engines with Gaseous Fuel"
    mohmmad sade ghahfarokhi : First author, Mohammad Reza Saffarian : second author, Rahim Ebrahimi : Third author
    International Conference on Mechanical Engineering and Advanced Technology, 2012
24. "thermodynamic modeling of two stage compressed air system"
    Salem Mehrzad : First author, shahram azizifar : second author, Mohammad Reza Saffarian : Third author
    International Conference on Mechanical Engineering and Advanced Technology, 2012
25. "Design of dessicant wheel for wet bult temperature control and improve cooling tower performance in ahvaz"
    ali chitsazan : First author, Salem Mehrzad : second author, Mohammad Reza Saffarian : Third author
    International Chiller and Cooling Tower Conference, 2012
26. "Effect of Turbulent Flow on Heat Transfer and Fluid Flow of Aluminum and Steel in Welding Based on GTAW Method"
    ALIASGHAR ZARGARZADAH : First author, ali farzadi : second author, Mohammad Reza Saffarian : Third author
    20th annual International Iranian Mechanical Engineering Conference, 2012
27. "Numerical Simulation of Thixotropic Activated Sludge in Secondary Water Clarifiers"
    Mohammad Reza Saffarian : First author, Mehrzad Shams : second author, ALIASGHAR ZARGARZADAH : Third author
    20th annual International Iranian Mechanical Engineering Conference, 2012
28. "Evaluating the effect of welding current on the welding dimensions and the position of the sensitivity zone in 304 stainless steel using the experimental and simulation results"
    mohsan roshabni : First author, Khalil Gheisari : second author, mohsen reihanian : Third author, Mohammad Reza Saffarian : Fourth author
    12 th National Conference on Welding and Inspection, 2011
29. "Evaluation of Water Injection into the Compressor Inlet of CW25IB Gas Turbine"
    Ebrahim Hajidavalloo : First author, Mohammad Reza Saffarian : second author
    13th International Symposium on Transport Phenomena, 2002
30. "Modeling and Simulation of Gas Turbine Cycles with Water Injection in Compressor Inlet"
    Ebrahim Hajidavalloo : First author, Mohammad Reza Saffarian : second author, Ebrahim Hajidavalloo : Presnter
    13th International Symposium on Transport Phenomena, 2002