Journal Paper

1. "Investigating the microstructure and mechanical properties of API X70 during various hot rolling conditions"
   مهدي رضايي : First author, mohsen reihanian : second author, Moustafa Eskandari : Third author
   scientific journal of new materials, pp.79-90, 2020
2. "The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy"
   nafise talavari : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
   scientific journal of new materials, pp.147-158, 2016
3. "Constitutive modeling, processing map optimization, and recrystallization kinetics of high-grade X80 pipeline steel"
   حامد اسكندري : First author, mohsen reihanian : second author, Seyed Reza Alavi zaree : Third author
   Journal of Materials Research and Technology, pp.2315-2330, 2024
4. "Exploring novel magnetic behaviors in cobalt-doped magnetite synthesized by plasma arc discharge method"
   KOSAR MOMBEINI : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
   Materials Today Communications, pp.1-12, 2024
5. "Investigating Electrical and Magnetic Properties of Spark Plasma Sintered (FeCoNi)75Cu25-xSix High Entropy Alloys"
   مهرناز جاودان : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, pp.1-17, 2024
6. "CNTs agglomeration effect on wear and mechanical behaviors of FeCoNiMn medium entropy alloys"
   ياسمين حمادي : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, khalil Ranjbar : Fourth author
   transaction of indian institute of metals, pp.1-10, 2024
7. "An Analysis of Efficiency Parameter and its Modifications Utilized for Development of Processing Maps"
   حامد اسكندري : First author, mohsen reihanian : second author, Seyed Reza Alavi zaree : Third author
   Iranian Journal of Materials Forming, pp.45-51, 2024
8. "Selective laser melting of Hastelloy-X alloy and cerium oxide reinforced Hastelloy-X composite: Microstructural examination and corrosion behavior"
   khalil Ranjbar : First author, مروه علی حرب : second author, Mahdi Yeganeh : Third author, mohsen reihanian : Fourth author, جاويد ناصري : Author5
   Journal of Materials Research and Technology, pp.7803-7815, 2024
9. "(FeCoNi)75Cu25-xSix high entropy alloys prepared by mechanical alloying and spark plasma sintering: Microstructure, deformation behavior and dynamic recrystallization kinetics"
   مهرناز جاودان : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
   Materials Characterization, pp.1-19, 2024
10. "Microstructure, deformation behavior, and dynamic recrystallization kinetics of FeNiMnCu-based high entropy alloys prepared by mechanical alloying and spark plasma sintering"
    nasim jahani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Journal of Alloys and Compounds, pp.1-20, 2024
11. "Incorporating electromagnetic stirring into casting of semisolid AXE622 Mg alloy: effect of process parameters on microstructure and mechanical properties"
    afshin habibi etekhar : First author, Seyed Mohsen Sadrossadat Zadeh : second author, mohsen reihanian : Third author
    International Journal of Metalcasting, 2024
12. "Alloying and corrosion characteristics of FeNiMnCu-based high entropy alloys"
    nasim jahani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Materials chemistry and physics, pp.1-13, 2024
13. "A Novel Approach for Estimating Fatigue Behavior of Stainless Steel 304 Using Tensile Test Data"
    ramin Ebrahimi : First author, mohsen reihanian : second author, Raheleh Namvarian : Third author
    international journal of iron and steel society of iran, pp.45-50, 2024
14. "Improving strength-ductility synergy of nano/ ultrafine-structured Al/Brass composite by cross accumulative roll bonding process"
    Majid Naseri : First author, mohsen reihanian : second author, Ahmad Ostovari Moghaddam : Third author, Davood Gholami : Fourth author, Seyedmehdi Hosseini : Author5, Mohammad Alvand : Author 6, Ehsan Borhani : Author 7, Evgeny Trofimov : Author 8
    Journal of Materials Research and Technology, pp.6794-6806, 2023
15. "Insights into the Mechanical Properties and Correlation Between Strain Path and Crystallographic Texture of the AA2024 Alloy During Severe Plastic Deformation"
    Majid Naseri : First author, mohsen reihanian : second author, Ahmad Ostovari Moghaddam : Third author, Davood Gholami : Fourth author, Mohammad Alvand : Author5, Ehsan Borhani : Author 6, Evgeny Trofimov : Author 7
    Metals and Materials International, pp.1-13, 2023
16. "Mechanically alloyed (FeCoNi)75Cu25-xSix high entropy alloys: Phase evaluation and magnetic properties"
    مهرناز جاودان : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
    Journal of Alloys and Compounds, pp.1-14, 2023
17. "Optimizing the strength and electrical conductivity of graphene reinforced Cu-Cr-Zr alloy fabricated by powder metallurgy and spark plasma sintering"
    جاويد ناصري : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    Materials chemistry and physics, pp.1-15, 2023
18. "Alloying, phases and magnetic behaviour of mechanically alloyed FeNiMnCu-based high entropy alloys"
    nasim jahani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Materials Science and Technology, pp.1-15, 2023
19. "Aging and wear characteristics of A356 alloy with Er and Zr addition"
    mohsen reihanian : First author, khalil Ranjbar : second author, زينب حاجي زاده : Third author
    Materials Science and Technology, pp.1-16, 2023
20. "CNT-Reinforced Al-xZr (x=0.25, 0.5 and 1 wt.%) Surface Composites Fabricated by Friction Stir Processing: Microstructural, Mechanical and Wear Characterisation"
    mohsen reihanian : First author, محمدعلي باوي : second author, khalil Ranjbar : Third author
    Philosophical Magazine, pp.1-31, 2022
21. "Effect of Homogenization on Microstructure and Hardness of Arc-Melted FeCoNiMn High Entropy Alloy During High-Pressure Torsion (HPT)"
    fatemeh alijani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Kaveh Edalati : Fourth author, Hiroyuki Miyamoto : Author5
    Journal of Materials Engineering and Performance, pp.5080-5089, 2022
22. "Effect of heat input on microstructure and mechanical properties of TIG-welded semisolid cast AXE622 Mg alloy"
    afshin habibi etekhar : First author, Seyed Mohsen Sadrossadat Zadeh : second author, mohsen reihanian : Third author
    Materials Characterization, pp.1-13, 2021
23. "Creep behavior of different microstructural zones of TIG-welded semisolid cast AXE622 alloy"
    afshin habibi etekhar : First author, Seyed Mohsen Sadrossadat Zadeh : second author, mohsen reihanian : Third author
    Materials Science and Technology, pp.1-9, 2021
24. "Microstructural investigation and high temperature mechanical behavior of the AXE622 cast Mg alloy"
    afshin habibi etekhar : First author, Seyed Mohsen Sadrossadat Zadeh : second author, mohsen reihanian : Third author
    Metals and Materials International, pp.1-13, 2021
25. "Statistical optimization of electromagnetic stirring parameters for semisolid AM60 slurry using Taguchi based grey relational analysis"
    afshin habibi etekhar : First author, Seyed Mohsen Sadrossadat Zadeh : second author, mohsen reihanian : Third author
    International Journal of Metalcasting, pp.1-11, 2021
26. "Role of Strain Reversal in Microstructure and Texture of Pure Al during Non-Monotonic Simple Shear Straining"
    Ebad Bagherpour : First author, mohsen reihanian : second author, Fathallah Qods : Fourth author, Hiroyuki Miyamoto : Author5, هیرویوکی میاموتو : نویسنده پنجم
    CRYSTALS, pp.1-15, 2020
27. "Tensile and creep properties of Al–7Si–0.3Mg alloy with Zr and Er addition"
    سجاد رشنو : First author, mohsen reihanian : second author, khalil Ranjbar : Third author
    Materials Science and Technology, pp.1603-1613, 2020
28. "Microstructure and high-temperature deformation behavior of FeCoNiMnV high entropy alloy"
    fatemeh alijani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Hiroyuki Miyamoto : Fourth author
    Materials chemistry and physics, pp.1-11, 2020
29. "Role of Cracked Interlayer on Deformation Processing of Al/hard Chrome/Al Laminate"
    سکینه فاخر : First author, mohsen reihanian : second author, mohamad lari baghal : Third author, Laleh Fatahi : Fourth author
    Metals and Materials International, pp.1-13, 2020
30. "Microstructural Characterization of Mechanically Alloyed FeCoNiMnV High Entropy Alloy Consolidated by Spark Plasma Sintering"
    fatemeh alijani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Hiroyuki Miyamoto : Fourth author, Motohiro Yuasa : Author5
    Advanced Engineering Materials, pp.1-13, 2020
31. "Microstructure and Impression Creep Behavior of Al–7Si–0.3Mg Alloy with Zr Addition"
    mohsen reihanian : First author, khalil Ranjbar : second author, سجاد رشنو : Third author
    Metals and Materials International, pp.1-11, 2020
32. "Effect of Rare Earth Er on Microstructure and Creep Behavior of Al–7Si–0.3Mg Alloy"
    سجاد رشنو : First author, mohsen reihanian : second author, khalil Ranjbar : Third author
    Metals and Materials International, pp.1-11, 2019
33. "Kinetics of recrystallization and microstructure distribution during isothermal annealing of cold rolled nickel"
    nasim jahani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    MATERIALS RESEARCH EXPRESS, pp.1-13, 2019
34. "Impression creep characterization of cast Al–7Si–0.3Mg alloy"
    سجاد رشنو : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    MATERIALS RESEARCH EXPRESS, pp.1-11, 2019
35. "Fabrication of glass/carbon fiber-reinforced Al-based composites through deformation bonding"
    mohsen reihanian : First author, Mohammad Dashtbozorg : second author, mohamad lari baghal : Third author
    Journal of Composite Materials, pp.2531-2543, 2019
36. "An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications"
    ebad bagherpour : First author, Nima Pardis : second author, mohsen reihanian : Third author, ramin Ebrahimi : Fourth author
    International Journal of Advanced Manufacturing Technology, pp.1647-1694, 2019
37. "Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying"
    fatemeh alijani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Journal of Alloys and Compounds, pp.623-630, 2019
38. "Wear-Resistant Al/SiC-Gr Hybrid Metal Matrix Composite Fabricated by Multiple Annealing and Roll Bonding"
    mohsen reihanian : First author, ارسلان بهارلو : second author, mohamad lari baghal : Third author
    Journal of Materials Engineering and Performance, pp.6676-6689, 2018
39. "EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation"
    مجيد ناصري : First author, mohsen reihanian : second author, Ehsan Borhani : Third author
    Journal of Ultrafine Grained and Nanostructured Materials (JUFGNSM), pp.123-138, 2018
40. "Microstructural control and layer continuity in deformation bonding of metallic laminated composites"
    Marzieh Rah Dari : First author, mohsen reihanian : second author, mohamad lari baghal : Third author
    Materials science and Engineering A, pp.98-110, 2018
41. "Ten Years of Severe Plastic Deformation (SPD) in Iran, Part II: Accumulative Roll Bonding (ARB)"
    mohsen reihanian : First author, ebad bagherpour : second author, Nima Pardis : Third author, Nobuhiro Tsuji : Author5, نوبوهیرو تیسوژی : نویسنده پنجم
    Iranian Journal of Materials Forming, pp.1-25, 2018
42. "Ten Years of Severe Plastic Deformation (SPD) in Iran, part I: Equal-Channel Angular Pressing (ECAP)"
    ebad bagherpour : First author, mohsen reihanian : second author, Nima Pardis : Third author, ramin Ebrahimi : Fourth author, T.G. Langdon : Author5
    Iranian Journal of Materials Forming, pp.71-113, 2018
43. "Nanostructured Al/SiC-graphite composites produced by accumulative roll bonding: role of graphite on microstructure, wear and tensile behavior"
    mohsen reihanian : First author, سارا فايضي پور : second author, mohamad lari baghal : Third author
    Journal of Materials Engineering and Performance, pp.1908-1919, 2017
44. "Tailoring particle distribution non-uniformity and grain refinement in nanostructured metal matrix composites fabricated by severe plastic deformation (SPD): a correlation with flow stress"
    Ebad Bagherpour : First author, mohsen reihanian : second author, Hiroyuki Miyamoto : Third author
    Journal of Materials Science, pp.3436-3446, 2017
45. "Role of powder preparation route on microstructure and mechanical properties of Al-TiB2 composites fabricated by accumulative roll bonding (ARB)"
    مرضيه عسكرپور : First author, Zohreh Sadeghian : second author, mohsen reihanian : Third author
    Materials science and Engineering A, pp.400-410, 2016
46. "Effect of strain path on microstructure, deformation texture and mechanical properties of nano/ultrafine grained AA1050 processed by accumulative roll bonding (ARB)"
    مجيد ناصري : First author, mohsen reihanian : second author, Ehsan Borhani : Third author
    Materials science and Engineering A, pp.288-298, 2016
47. "Bonding behavior during cold roll-cladding of tri-layered Al/brass/Al composite"
    مجيد ناصري : First author, mohsen reihanian : second author, Ehsan Borhani : Third author
    Journal of Manufacturing Processes, pp.125-137, 2016
48. "A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB)"
    mohsen reihanian : First author, mohamad lari baghal : second author, fateme keshavarz : Third author, mohammad hosein paydar : Fourth author
    Journal of Ultrafine Grained and Nanostructured Materials (JUFGNSM), pp.29-35, 2016
49. "Production of Al/Sn multilayer composite by accumulative roll bonding (ARB): A study of microstructure and mechanical properties"
    Laleh Ghalandari : First author, Mohammad Mehdi Mahdavian : second author, mohsen reihanian : Third author, Mehdi Mahmoudiniya : Fourth author
    Materials science and Engineering A, pp.179-186, 2016
50. "A new strategy to simultaneous increase in the strength and ductility of AA2024 alloy via accumulative roll bonding (ARB)"
    مجيد ناصري : First author, mohsen reihanian : second author, Ehsan Borhani : Third author
    Materials science and Engineering A, pp.12-20, 2016
51. "An analytical approach for necking and fracture of hard layer during accumulative roll bonding (ARB) of metallic multilayer"
    mohsen reihanian : First author, مجيد ناصري : second author
    Material and Design, pp.1213-1222, 2016
52. "Effect of the particle size on the deformation and fracture behavior of Al/4vol.%Al2O3 composite produced by accumulative roll bonding (ARB)"
    mohsen reihanian : First author, مجيد ناصري : second author, جليلي شاه منصوري-معصومه : Third author
    Iranian Journal of Materials Forming, pp.14-26, 2015
53. "Accumulative roll bonding (ARB) of the composite coated strips to fabricate multi-component Al-based metal matrix composites"
    syed vali ahmadi ana : First author, mohsen reihanian : second author, behnam lotfi : Third author
    Materials science and Engineering A, pp.303-312, 2015
54. "Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy"
    sina takhti : First author, mohsen reihanian : second author, Ali Ashrafi : Third author
    transactions of nonferrous metals society of china, pp.2137-2146, 2015
55. "High strength Al with uniformly distributed Al2O3 fragments fabricated by accumulative roll bonding and plasma electrolytic oxidation"
    mohsen reihanian : First author, جليلي شاه منصوري-معصومه : second author, Mehdi Khorasanian : Third author
    Materials science and Engineering A, pp.195-199, 2015
56. "Al-based magnetic composites produced by accumulative roll bonding ARB"
    فرزانه دانشور : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Materials Science and Engineering B, pp.45-54, 2015
57. "Fabrication of the Cu-Zn Multilayer and Cu-Zn Alloy by Accumulative Roll Bonding (ARB) with an Emphasis on the Wear Behavior"
    mohsen reihanian : First author, Mohammad Mehdi Mahdavian : second author, Laleh Ghalandari : Third author
    Iranian Journal of Materials Forming, pp.52-62, 2014
58. "Fabrication of Al- 2Vol.%Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties"
    mohsen reihanian : First author, fateme keshavarz : second author, mohammad hosein paydar : Third author
    Materials science and Engineering A, pp.188-196, 2014
59. "Evaluation of sensitization in gas tungsten arc welded AISI 304 stainless steel"
    mohsan roshabni : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Mohammad Reza Saffarian : Fourth author
    Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, pp.207-215, 2014
60. "Formation of a Solid Solution Through Accumulative Roll Bonding (ARB) and Post-Heat Treatment of Multilayered Cu/Zn/Al"
    mohsen reihanian : First author, Mohammad Mehdi Mahdavian : second author, Laleh Ghalandari : Third author, Ali Obeidavi : Fourth author
    Iranian Journal of Materials Forming, pp.24-31, 2014
61. "Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding ARB"
    Laleh Ghalandari : First author, Mohammad Mehdi Mahdavian : second author, mohsen reihanian : Third author
    Materials science and Engineering A, pp.145-152, 2014
62. "Accumulative roll bonding of multilayered Cu/Zn/Al: An evaluation of microstructure and mechanical properties"
    Mohammad Mehdi Mahdavian : First author, Laleh Ghalandari : second author, mohsen reihanian : Third author
    Materials science and Engineering A, pp.99-107, 2013
63. "On the achievement of uniform particle distribution in metal matrix composites fabricated by accumulative roll bonding"
    mohsen reihanian : First author, Ebad Bagherpour : second author, mohammad hosein paydar : Third author
    Materials Letters, pp.59-62, 2013
64. "Processing twining induced plasticity steel through simple shear extrusion"
    ebad bagherpour : First author, mohsen reihanian : second author, رامین ابراهیمی : نویسنده سوم
    Materials and design, pp.262-267, 2012
65. "On the capability of severe plastic deformation of twinning induced plasticity (TWIP) steel"
    ebad bagherpour : First author, mohsen reihanian : second author, رامین ابراهیمی : نویسنده سوم
    Materials and design, pp.391-395, 2012
66. "Particle distribution in metal matrix composites fabricated by accumulative roll bonding"
    mohsen reihanian : First author, ebad bagherpour : second author, mohammad hosein paydar : Third author
    Materials Science and Technology, pp.103-108, 2012
67. "Fatigue failure analysis of holding U-bolts of a cooling fan blade"
    mohsen reihanian : First author, Khalil Sherafatnia : second author, Mohammad Sajjadnejad : Third author
    Engineering Failure analysis, pp.2019-2027, 2011
68. "On the mechanical properties and microstructure of commercially pure Al fabricated by semi-constrained groove pressing"
    Sobhan Moratab : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    Materials science and Engineering A, pp.6912-6918, 2011
69. "Application of neural network and genetic algorithm to powder metallurgy of pure iron"
    mohsen reihanian : First author, Sayyed Reza Asadollah pour : second author, Sadegh Hajarpour : Third author, Khalil Gheisari : Fourth author
    Material and Design, pp.3183-3188, 2011
70. "Processing, strength and ductility of bulk nanostructured metals produced by severe plastic deformation: an overview"
    Ali Mashreghi : First author, Laleh Ghalandari : second author, mohsen reihanian : Third author, mohammad mohsen moshksar : Fourth author
    Materials Science Forum, pp.131-150, 2010
71. "A model for volume fraction and particle size selection in tri-modal metal matrix composite"
    mohsen reihanian : First author, ebad bagherpour : second author, mohammad hosein paydar : Third author
    Materials science and Engineering A, pp.172-175, 2009
72. "An analytical approach for radial-forward extrusion process"
    mohsen reihanian : second author, mohammad mohsen moshksar : Third author, محمد محسن مشکسار : نویسنده سوم
    Material and Design, pp.1694-1700, 2008
73. "Consolidation of Al particles through forward extrusion-equal channel angular pressing (FE-ECAP)"
    mohammad hosein paydar : First author, mohsen reihanian : second author, ebad bagherpour : Third author, meysam sharifzadeh : Fourth author, mehrdad zarinejad : Author5, T.A. Dean : Author 6
    Material Letter, pp.3266-3268, 2008
74. "An upper-bound analysis of the tube extrusion process"
    mohsen reihanian : second author, Mansour kanaani : Third author, mohammad mohsen moshksar : Fourth author, محمد محسن مشکسار : نویسنده چهارم
    Journal of Materials Processing Technology, pp.214-220, 2008
75. "Equal channel angular pressing-forward extrusion (ECAP-FE) consolidation of Al particles"
    mohammad hosein paydar : First author, mohsen reihanian : second author, ebad bagherpour : Third author, meysam sharifzadeh : Fourth author, mehrdad zarinejad : Author5, T.A. Dean : Author 6
    Material and Design, pp.429-432, 2008
76. "Upper-bound analysis of equal channel angular extrusion using linear and rotational velocity fields"
    mohsen reihanian : First author, mohammad mohsen moshksar : Third author, محمد محسن مشکسار : نویسنده سوم
    Material and Design, pp.28-34, 2008

Conference Paper

1. "Fabrication of high entropy alloy CrCoFeMnAl by mechanical alloying"
   شکوفه احمد پور چالشتري : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author, mohsen reihanian : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
2. "Effect of sintering temperaure on microstructure, mechanical properties and electrical conduction on mechanically alloyed CUCrZr produced by SPS"
   جاويد ناصري : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, Fatemeh Khabazipour : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
3. "ندارد"
   ياسمين حمادي : First author, Khalil Gheisari : second author, mohsen reihanian : Third author, khalil Ranjbar : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
4. "Investigating the effect of strain on static recrystallization kinetics of X80 steel"
   محمد مزبانی پور : First author, میکائیل شیرالی : second author, Mohammadhossein Danesh : Third author, mohsen reihanian : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
5. "Assessment of mechanical and electrical properties of Cu-Cr-Zr base alloy with Nb addition via mechanical alloying"
   خليل جاري زاده : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, جاويد ناصري : Fourth author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
6. "ندارد"
   محسن ممبيني : First author, ياسمين حمادي : second author, Khalil Gheisari : Third author, mohsen reihanian : Fourth author, khalil Ranjbar : Author 5
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
7. "ندارد"
   ايمان معراجي : First author, ياسمين حمادي : second author, Khalil Gheisari : Third author, mohsen reihanian : Fourth author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
8. "ندارد"
   KOSAR MOMBEINI : First author, Mohammad Reza Nik Khah : second author, Khalil Gheisari : Third author, mohsen reihanian : Fourth author
   1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
9. "Effect of strain on static recrystallization kinetics of cold rolled low carbon steel"
   علي كاهيداني : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
   3rd National Conference on Materials Engineering, Metallurgy, 2020
10. "Production of aluminum / nickel composite by means of cumulative rolling bond and electrical deposition and evaluation of mechanical behavior"
    سعيده عظيمي : First author, mohamad lari baghal : second author, mohsen reihanian : Third author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
11. "ندارد"
    KOSAR MOMBEINI : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
12. "Investigation of static recrystallization kinetic in pure nickel"
    nasim jahani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
13. "Effect of hard layer thickness on the layer continuity during multilayered composite rolling"
    Marzieh Rah Dari : First author, mohsen reihanian : second author, mohamad lari baghal : Third author
    کنفرانس ملی مهندسی مواد، متالورژی و معدن ایران, 2018
14. "Parameters affecting the bond strength of aluminum composite reinforced with carbon/glass short fiber"
    Mohammad Dashtbozorg : First author, mohsen reihanian : second author, mohamad lari baghal : Third author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
15. "Comparison of Lagrangian and Eulerian Finite Element Methods during Sandwich Sheet Rolling"
    سکینه فاخر : First author, mohamad lari baghal : second author, mohsen reihanian : Third author, Laleh Fatahi : Fourth author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
16. "Microstructure and mechanical properties of Al/SiC/Gr hybrid composite produced by continual annealing and roll bonding (CAR)"
    ارسلان بهارلو : First author, mohsen reihanian : second author, mohamad lari baghal : Third author
    1st Iran Congress On Industrial Applications of Advanced Materials and Manufacturing, 2017
17. "Microstructure and mechanical properties of Al/SiC/Gr hybrid composite via accumulative roll bonding (ARB)"
    سارا فايضي پور : First author, mohsen reihanian : second author, mohamad lari baghal : Third author
    5th International Conference on Materials Engineering and Metallurgy, 2016
18. "ندارد"
    nafise talavari : First author, Khalil Gheisari : second author, mohsen reihanian : Third author
    the second international and the seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, 2013
19. "Investigating the microstructure and mechanical properties of Al/Al2O3/SiC composite produced by accumulative roll bond (ARB)"
    fateme keshavarz : First author, mohsen reihanian : second author, mohammad hosein paydar : Third author
    the second international and the seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, 2013
20. "ندارد"
    sina takhti : First author, Ali Ashrafi : second author, mohsen reihanian : Third author
    The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Sociaty and Iranian Foundrymen's Society, 2012
21. "Evaluating the effect of welding current on the welding dimensions and the position of the sensitivity zone in 304 stainless steel using the experimental and simulation results"
    mohsan roshabni : First author, Khalil Gheisari : second author, mohsen reihanian : Third author, Mohammad Reza Saffarian : Fourth author
    12 th National Conference on Welding and Inspection, 2011
22. "Microstructure and Mechanical Properties of Al/Brass Composite Produced by Accumulative Roll Bonding"
    Nsim nasirian : First author, mohsen reihanian : second author
    پنجمین همایش مشترک انجمن مهندسین متالورژی ایران و انجمن علمی ریخته گری ایران, 2011
23. "Evaluating the behavior of TWIP steel processed by severe plastic deformation methods"
    ebad bagherpour : First author, mohsen reihanian : second author, رامین ابراهیمی : نویسنده سوم
    Steel Symposium 89, 2011
24. "Evaluating the mechanical properties of Al-1060 after severe plastic deformation through semi constrained groove pressing (SCGP)"
    Sobhan Moratab : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, Abdolali Pooladgar : Fourth author
    4th joint conference of Iranian Metallurgical Engineers Society & Iranian, Foundaryman Society, 2010
25. "Investigating the effect of sintering temperature on mechanical properties of pure iron produced by powder metallurgy using soft computing techniques"
    Sadegh Hajarpour : First author, Sayyed Reza Asadollah pour : second author, mohsen reihanian : Third author, Khalil Gheisari : Fourth author
    4th joint conference of Iranian Metallurgical Engineers Society & Iranian, Foundaryman Society, 2010
26. "Failure analysis of the austenitic stainless steel used as the u-bolt of the fan cooling blade"
    Mohammad Sajadnejad : First author, mohsen reihanian : second author, javad safari : Third author
    steel samposium 87, 2009
27. "Characterization of FeCoNiMnV high entropy alloy fabricated by ball milling and spark plasma sintering"
    fatemeh alijani : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, Motohiro Yuasa : Fourth author, Hiroyuki Miyamoto : Author 5
    The Japan Institute of Metals and Materials (JIM) Annual Autumn Meeting 2019, 2019
28. "Deformation behavior of TWIP steel during simple shear extrusion (SSE)"
    ebad bagherpour : First author, mohsen reihanian : second author, رامین ابراهیمی : نویسنده سوم
    3rd International Conference on Ultrafine Grained and Nanostructured Materials, 2011