Journal Paper

1. "Overlaying of colmonoy 6 on plain carbon steel by plasma transfer arc welding and tungsten inert gas welding: comparison of microstructure and wear behavior"
   khalil Ranjbar : First author, عليرضا فيروزي : second author, Farhad Sharyari noghorani : Third author, fateme sadat zyaee motlagh : Fourth author
   journal of welding science and technology of Iran, pp.131-142, 2024
2. "The effect of double overaging treatment on the microstructure and pitting corrosion behavior of the weld zone in 17-4PH stainless steel"
   علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
   journal of welding science and technology of Iran, pp.31-46, 2024
3. "Effect of diffusion bonding temperature on microstructure properties of Zr/Ti interlayer in the diffusion bonded joints of Zr702 to A516 steel"
   علي پور جعفر : First author, Reza Dehmalaie : second author, Seyed Reza Alavi zaree : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author5
   journal of welding science and technology of Iran, pp.13-21, 2023
4. "Microstructural study of Ti/3YSZ interface in NI 105/Ni/Nb/Ti/3YSZ diffusion bonding"
   ايمان صيدي : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
   journal of welding science and technology of Iran, pp.57-64, 2022
5. "HIC and SCC Corrosion Behavior of the 17-4 PH Stainless Steel in Double Over Aged Condition"
   علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
   Journal of Corrosion Sciences and Engineering, pp.53-64, 2021
6. "Failure Analysis of Steam Condenser Heat Exchanger Tubes"
   Emad Sharifi : First author, khalil Ranjbar : second author, محمد شاكري : Third author
   Journal of Corrosion Sciences and Engineering, pp.23-33, 2021
7. "Correlation of Microstructure with Mechanical Behavior of HSLA-100 Weld Metal Produced By GTAW Method"
   مهيار داريوندپور : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
   novel processes in material science, pp.35-48, 2021
8. "evaluation of microstructure and mechanical properties of API 5L X80/DSS 2205 weld metals produced by PCGTAW"
   Reza Dehmalaie : First author, mohammadsaeed raeesi sarani : second author, khalil Ranjbar : Third author
   journal of welding science and technology of Iran, pp.91-102, 2021
9. "Corrosion Behavior of Dissimilar Welded Joint Between Inconel 617 Alloy and A387-Gr.11 Low-Alloy Steel"
   زهرا شهریاری : First author, iman keivanrad : second author, Khalil Gheisari : Third author, khalil Ranjbar : Fourth author, Reza Dehmalaie : Author5, Sayed rouhollah Mousavi : Author 6
   journal of welding science and technology of Iran, pp.119-135, 2021
10. "Thermodynamically Prediction of in-Situ Al3Zr and Al3Ti Aluminides Formation in Friction Stir Processing Based on Effective Gibbs Free Energy Change of Formation (ΔGe) Model"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    نشریه مهندسی متالورژی و مواد, pp.1-14, 2020
11. "Effect of Heat Input on Microstructure and Mechanical Properties of A7020-T6 Alloy Joined by TIG Welding"
    محمد عليپوربهزادي : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    نشریه مهندسی متالورژی و مواد, pp.135-148, 2020
12. "Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr + Al3Ti composite fabricated via friction stir processing"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    Journal of Science and Technology of Composites, pp.363-372, 2019
13. "The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    Eseghlal, pp.49-64, 2019
14. "The Effect of Electromagnetic Vibration on The Microstructural Variations and Erosion Behavior of The HSLA-100 Steel Weld Metal"
    Hossein Naseri : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    Iranian Journal of Surface and Engineering, pp.79-91, 2018
15. "Microstructural Assessment and Wear Behavior of Al 3003/ In-Situ Formed Surface Composite Fabricated by Friction Stir Processing Technique"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    Iranian Journal of Surface and Engineering, pp.65-78, 2018
16. "in situ fabrication of Al3003/Al3Ti by elemental Ti powder using friction stir proessing"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    scientific journal of new materials, pp.57-70, 2018
17. "Effect of interpass heat treatment on microstructure and mechanical properties of insitu formed nono composite Al3003-Al/Al3Ti by friction stir processingTi3Ti/Al-3003A"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    Nano materials, pp.105-116, 2018
18. "Effect of Cerium Oxide on Wear and Corrosion Behavior of Al5083/CeO2 Surface Composite Fabricated by Friction Stir Processing"
    مصطفي امرا : First author, khalil Ranjbar : second author, Seyed Ali Hosseini : Third author
    Iranian Journal of Surface and Engineering, pp.51-63, 2017
19. "Evaluating the microstructure and mechanical properties of dissimilar welding between austenitic stainless steel A240-TP. 316 and ferritic low alloy steel A387-Gr. 11"
    sayadhosain mirkarimi : First author, khalil Ranjbar : second author, mohsan roshabni : Third author, Reza Dehmalaie : Fourth author
    نشریه مهندسی متالورژی و مواد, pp.23-38, 2016
20. "ساخته شده به روش اتصال Al/Brass بررسي خواص مكانيكي و ريزساختاري كامپوزيت نوردي تجمعي"
    Nsim nasirian : First author, khalil Ranjbar : second author
    مواد نوین, pp.45-53, 2012
21. "Microstructural Aspects in the Diffusion Bonding of Zr702 to A516 Steel with Ni/Mo/Ti Multi-Interlayer"
    علي پورجعفر : First author, Seyed Reza Alavi zaree : second author, Reza Dehmalaie : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author5
    Journal of Advanced Materials and Processing, pp.3-13, 2024
22. "Structural, optical, magnetic, and photocatalytic degradation characteristics of Co0.5Ni0.5Fe2O4 nanoparticles synthesized by plasma arc discharge process"
    پرستو مغازه ئي : First author, Khalil Gheisari : second author, khalil Ranjbar : Third author, علي رضا محمديان : Fourth author, Shekhar Bhame : Author5
    Materials chemistry and physics, pp.1-13, 2024
23. "CNTs agglomeration effect on wear and mechanical behaviors of FeCoNiMn medium entropy alloys"
    ياسمين حمادي : First author, mohsen reihanian : second author, Khalil Gheisari : Third author, khalil Ranjbar : Fourth author
    transaction of indian institute of metals, pp.1-10, 2024
24. "Selective laser melting of Hastelloy-X alloy and cerium oxide reinforced Hastelloy-X composite: Microstructural examination and corrosion behavior"
    khalil Ranjbar : First author, مروه علی حرب : second author, Mahdi Yeganeh : Third author, mohsen reihanian : Fourth author, جاويد ناصري : Author5
    Journal of Materials Research and Technology, pp.7803-7815, 2024
25. "Effect of Processing Routes on Microstructural Development, Mechanical Properties, and Wear Behavior of Ti6Al4V Alloy"
    پرستو مغازه ئي : First author, khalil Ranjbar : second author, جاويد ناصري : Third author
    Journal of Materials Engineering and Performance, pp.1-12, 2024
26. "Softening, Hardening, and Precipitation Evolution of the AA6082-T651 Heat-Affected Zone Caused by Thermal Cycles During and After Welding"
    محمد جولا : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    Metals and Materials International, pp.3664-3678, 2023
27. "Magnetic and electrical transport properties of Cu0.5Ni0.5Fe2O4 ferrite synthesized by plasma arc discharge process"
    پرستو مغازه ئي : First author, Khalil Gheisari : second author, khalil Ranjbar : Third author, alireza mohammadian : Third author, Shekhar Bhame : Author5
    Physica Scripta, pp.1-17, 2023
28. "Primming assisted failure of superheater tubes in a sugarcane industry"
    khalil Ranjbar : First author, جاويد ناصري : second author, Reza Dehmalaie : Third author, Seyed Reza Alavi zaree : Fourth author, Ebrahim Mosavipour : Author5
    Engineering Failure analysis, pp.1-18, 2023
29. "Optimizing the strength and electrical conductivity of graphene reinforced Cu-Cr-Zr alloy fabricated by powder metallurgy and spark plasma sintering"
    جاويد ناصري : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    Materials chemistry and physics, pp.1-15, 2023
30. "Selecting the Appropriate Filler Metal to Join HSLA-100 Steel by Gas Tungsten Arc Welding Process"
    مهيار داريوندپور : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author, حسين ناصري : Fourth author
    Journal of Materials Engineering and Performance, pp.1-11, 2023
31. "Aging and wear characteristics of A356 alloy with Er and Zr addition"
    mohsen reihanian : First author, khalil Ranjbar : second author, زينب حاجي زاده : Third author
    Materials Science and Technology, pp.1-16, 2023
32. "Dielectric behavior of nanocrystalline Cu-Fe ferrites synthesized by plasma arc discharge process"
    نويد محمدي نژاد : First author, Khalil Gheisari : second author, khalil Ranjbar : Third author, Abdolhamid sabahi : Fourth author
    Physica B, pp.1-9, 2023
33. "Failure Assessment of Heat Exchanger Tubes Due to Grooving Corrosion"
    khalil Ranjbar : First author, Emad Sharifi : second author
    Journal of Failure Analysis and Prevention, pp.739-750, 2023
34. "Fabrication of Al5083-(CeO2-TiO2) hybrid surface composite via friction stir processing combined with plasma electrolytic oxidation"
    كيانا اسفندمز : First author, khalil Ranjbar : second author, Mehdi Khorasanian : Third author
    Journal of Manufacturing Innovations, pp.23-36, 2023
35. "Dezincification assisted cracking of yellow brass tubes in a heat exchanger"
    Emad Sharifi : First author, khalil Ranjbar : second author
    Engineering Failure analysis, pp.1-10, 2022
36. "Hydrogen induced cracking and stress corrosion cracking behavior of the weld metals in 17-4 precipitation hardening stainless steel after double over aging treatment"
    علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, pp.947-962, 2022
37. "CNT-Reinforced Al-xZr (x=0.25, 0.5 and 1 wt.%) Surface Composites Fabricated by Friction Stir Processing: Microstructural, Mechanical and Wear Characterisation"
    mohsen reihanian : First author, محمدعلي باوي : second author, khalil Ranjbar : Third author
    Philosophical Magazine, pp.1-31, 2022
38. "Characterization of nanocrystalline CuxFe1-xFe2O4 ferrite powders synthesized via plasma arc discharge process"
    نويد محمدي نژاد : First author, Khalil Gheisari : second author, khalil Ranjbar : Third author
    Journal of Magnetism and Magnetic Materials, pp.1-8, 2022
39. "Longitudinal fracture and water accumulation at 6 o’clock position of an API 5L X52 oil pipeline"
    khalil Ranjbar : First author, Seyed Reza Alavi zaree : second author
    Engineering Failure analysis, pp.1-15, 2021
40. "Investigating the heat input effect of the GTAW process upon the microstructure and HAZ extension of HSLA-100 steel weld joints using thermal cycles"
    Mahyar Darivandpour : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    International Journal of Iron & Steel Society of Iran, pp.57-69, 2021
41. "Tensile and creep properties of Al–7Si–0.3Mg alloy with Zr and Er addition"
    سجاد رشنو : First author, mohsen reihanian : second author, khalil Ranjbar : Third author
    Materials Science and Technology, pp.1603-1613, 2020
42. "Preventing Crack Formation at the Vicinity of the Fusion Zone in the Welding of Crane Rail Steel by Preheating Treatment"
    mohammad faghfoori : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author, Amir Hossien Klourazi : Fourth author
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, pp.541-552, 2020
43. "Microstructure and Impression Creep Behavior of Al–7Si–0.3Mg Alloy with Zr Addition"
    mohsen reihanian : First author, khalil Ranjbar : second author, سجاد رشنو : Third author
    Metals and Materials International, pp.1-11, 2020
44. "Failure Assessment of an Admiralty Brass Oil Exchanger Tubes"
    khalil Ranjbar : First author, علي تقويان : second author, mostafa amra : Third author
    Journal of Failure Analysis and Prevention, pp.218-225, 2020
45. "Characterization and strengthening of porous alumina-20 wt% zirconia ceramic composites"
    سمانه رضايي : First author, khalil Ranjbar : second author, alireza kiasat : Third author
    Ceramics International, pp.893-902, 2020
46. "Thermal conductivity of porous Alumina-20 wt% zirconia ceramic composites"
    سمانه رضايي : First author, khalil Ranjbar : second author
    Ceramics International, pp.16564-16571, 2020
47. "Effect of Rare Earth Er on Microstructure and Creep Behavior of Al–7Si–0.3Mg Alloy"
    سجاد رشنو : First author, mohsen reihanian : second author, khalil Ranjbar : Third author
    Metals and Materials International, pp.1-11, 2019
48. "Wear and corrosion of in-situ formed Al3Zr aluminide reinforced Al3003 surface composite"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author
    International Journal of Materials Research, pp.874-884, 2019
49. "Impression creep characterization of cast Al–7Si–0.3Mg alloy"
    سجاد رشنو : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    MATERIALS RESEARCH EXPRESS, pp.1-11, 2019
50. "Friction-stir-welded overaged 7020-T6 alloy joint: an investigation on the effect of rotational speed on the microstructure and mechanical properties"
    محمد عليپوربهزادي : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author, Ebad Bagherpour : Fourth author
    International Journal of Minerals, Metallurgy and Materials, pp.622-633, 2019
51. "Microstructure and properties of a dissimilar weld between alloy 617 and A387 steel using different filler metals"
    khalil Ranjbar : First author, Reza Dehmalaie : second author, mostafa amra : Third author, iman keivanrad : Fourth author
    Welding in the World, pp.1121-1136, 2018
52. "Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing"
    mostafa amra : First author, khalil Ranjbar : second author, Seyed Ali Hosseini : Third author
    transactions of nonferrous metals society of china, pp.866-878, 2018
53. "The effect of surfactant on the sol–gel synthesis of alumina-zirconia nanopowders"
    سمانه رضايي : First author, khalil Ranjbar : second author, alireza kiasat : Third author
    Ceramics International, pp.199630-199690, 2018
54. "Failure assessment of ASTM A213-T12 superheater boiler tubes in a natural gas liquid plant"
    ارزو فيروزه : First author, khalil Ranjbar : second author, mohamad lari baghal : Third author, armin heidari : Fourth author, Anayat Allah Mohmi : Author5
    Engineering Failure analysis, pp.15-27, 2018
55. "Synthesis and characterization of mechanically alloyed cerium oxide reinforced Al-4.5Mg alloy composite"
    سارا رستگارنيا : First author, khalil Ranjbar : second author, Khalil Gheisari : Third author, gholam hossin borhani : Fourth author
    International Journal of Materials Research, pp.1081-1089, 2017
56. "In-situ fabrication of Al3Zr aluminide reinforced AA3003 alloy composite by friction stir processing"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    Materials Characterization, pp.78-90, 2017
57. "Effect of the addition of different sintering aids on the densification behavior of zirconia-toughened alumina nanocomposite powder"
    Mohamad Hadi Moghim : First author, سیدحجت مساوات : second author, khalil Ranjbar : Third author
    International Journal of Materials Research, pp.741-746, 2016
58. "Effect of Sintering on the Properties of c-Brass (Cu 5 Zn ) Nanoparticles Produced by the Electric Arc Discharge Method and the Thermal Conductivity of c-Brass Oil-Based Nanofluid"
    Mansoor Farbod : First author, alireza mohammadian : second author, khalil Ranjbar : Third author, razeye koh peymani : Fourth author
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.1409-1412, 2016
59. "On the Failure Analysis of an Air Preheater in a Steam Power Plant"
    Mohammad Reza Shayan : First author, khalil Ranjbar : second author, Ebrahim Hajidavalloo : Third author, armin heidari : Fourth author
    Journal of Failure Analysis and Prevention, pp.941-951, 2015
60. "Mechanical Properties and Corrosion Behavior of CeO2 and SiC Incorporated Al5083 Alloy Surface Composites"
    mostafa amra : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    Journal of Materials Engineering and Performance, pp.3169-3179, 2015
61. "Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing"
    Seyed Ali Hosseini : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author, Ali Reza Amirani : Fourth author
    Journal of Alloys and Compounds, pp.725-733, 2014
62. "Study on Failure Analyses and Material Characterizations of a Damaged Booster Pump"
    ali Alavi Shoshtari : First author, khalil Ranjbar : second author, Mohammad Mosavi : Third author, Daniel Azimi Yancheshmeh : Fourth author
    Journal of Failure Analysis and Prevention, pp.489-495, 2013
63. "Failure assessment of crude oil preheating tubes in monoethylene glycol–water mixture solution"
    khalil Ranjbar : First author, Arsalan Abassi : second author
    Engineering Failure analysis, pp.161-167, 2013
64. "Failure Analysis of a Drilling Wire Rope"
    Shapour Moradi : First author, khalil Ranjbar : second author, hesam makvandi : Third author
    Journal of Failure Analysis and Prevention, pp.558-566, 2012
65. "Failure assessment of the hard chrome coated rotors in the downhole drilling motors"
    khalil Ranjbar : First author, Majid Sababi : second author
    Engineering Failure analysis, pp.147-155, 2012
66. "Affect of ball milling on formation of ZnAl2O4 by displacement reaction of ZnO and Al powder mixture"
    alireza hedayatee : First author, zahra golestan : second author, khalil Ranjbar : Third author, Gholam Hosien Borhani : Fourth author
    Powder Metallurgy and Metal Ceramics, pp.268-274, 2011
67. "On the mechanical properties and microstructure of commercially pure Al fabricated by semi-constrained groove pressing"
    Sobhan Moratab : First author, khalil Ranjbar : second author, mohsen reihanian : Third author
    Materials science and Engineering A, pp.6912-6918, 2011
68. "MICROSTRUCTURAL EVALUATION OF ZIRCONIA DISPERSED ALUMINA COMPOSITES"
    khalil Ranjbar : First author
    Powder Metallurgy and Metal Ceramics, pp.722-729, 2011
69. "Failure analysis of a shell and tube oil cooler"
    Reza Taherzadeh Mousavian : First author, Esmaeil Hajjari : second author, D Ghasemi : Third author, M Kojouri Manesh : Fourth author, khalil Ranjbar : Author5
    Engineering Failure analysis, pp.202-211, 2010
70. "Failure assessment of composite cooler tubes in a gas boosting station"
    khalil Ranjbar : First author
    Engineering Failure analysis, pp.192-201, 2010
71. "Effect of flow induced corrosion and erosion on failure of a tubular heat exchanger"
    khalil Ranjbar : First author
    Materials and design, pp.613-619, 2009
72. "An investigation of the wear behaviour of 0.2% C dual phase steels"
    Vahid Abuee : First author, Hassan Saghafian : second author, shahram khirandish : Third author, khalil Ranjbar : Fourth author
    Journal of Materials Processing Technology, pp.107-112, 2008
73. "Mild oxidative wear behaviour of plain carbon dual-phase steel"
    ?? ayobi : First author, ?? sagefian : second author, ?? kherandish : Third author, khalil Ranjbar : Fourth author
    Steel Research International, pp.505-511, 2007
74. "Experimental and computational failure analysis of drillstrings"
    Shapour Moradi : First author, khalil Ranjbar : second author
    Engineering Failure analysis, pp.923-933, 2007
75. "Failure analysis of boiler cold and hot reheater tubes"
    khalil Ranjbar : First author
    Engineering Failure analysis, pp.620-625, 2007
76. "A study on the wear behaviour of dual phase steels"
    ?? ayobi : First author, ?? sagefian : second author, ?? kherandish : Third author, khalil Ranjbar : Fourth author
    Journal of Material Science & Technology, pp.107-110, 2007
77. "Effect of chemically added zirconia and yttria on the mechanical properties of ziroconia-dispersed alumina"
    khalil Ranjbar : First author, bodapati ti.rayo : second author, talaperhgadar ramamolan : Third author
    American Ceramic Society Bulletin, pp.63-66, 1994
78. "Sintering and Mechanical properties evaluation of pure and magnesia doped ZTA"
    niger bervanker : First author, khalil Ranjbar : second author, bodapati ti.rayo : Third author, t.r ramahan : Fourth author
    Transaction of PMAI, pp.49-53, 1993
79. "Effect of zirconia allotropes on fracture touginess of a-alumina"
    khalil Ranjbar : First author, bodapati ti.rayo : second author, talaperhgadar ramamolan : Third author
    Seramic Transactions, pp.473-484, 1993

Conference Paper

1. "Effect of temperature on the microstructure of Mo/Ni interlayer in the diffusion boning of Zr702 to A516 steel"
   علي پورجعفر : First author, Reza Dehmalaie : second author, Seyed Reza Alavi zaree : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author 5
   6th International Conference on Welding and Non Destructive Testing & 24th National Conference on Welding & Inspection & 13th National Conference on NDT & 2nd National Conference on Additive Manufacturing, 2024
2. "Hard facing of a plain carbon steel by super alloy colmonoy-6 through plasma transfer arc welding, study on microstructure and wear behavior"
   عليرضا فيروزي : First author, khalil Ranjbar : second author, Farhad Sharyari noghorani : Third author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
3. "Fabrication of high entropy alloy CrCoFeMnAl by mechanical alloying"
   شکوفه احمد پور چالشتري : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author, mohsen reihanian : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
4. "Effect of sintering temperaure on microstructure, mechanical properties and electrical conduction on mechanically alloyed CUCrZr produced by SPS"
   جاويد ناصري : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, Fatemeh Khabazipour : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
5. "Phase analysis of FeCoCrNiVMo0.3 high entropy alloy produced by mechanical alloying"
   ايمان صيدي : First author, Reza Dehmalaie : second author, Esmaeil Hajjari : Third author, khalil Ranjbar : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
6. "ندارد"
   ياسمين حمادي : First author, Khalil Gheisari : second author, mohsen reihanian : Third author, khalil Ranjbar : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
7. "A به فولاد 516 Zr در اتصال نفوذی 702 Mo/Ti تاثیر دما بر ریزساختار و لایه واکنشی فصل مشترک"
   علي پورجعفر : First author, Reza Dehmalaie : second author, Seyed Reza Alavi zaree : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author 5
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
8. "Effect of diffusion bonding temperature on microstructure properties of Ni/SA516 interlayer in the diffusion bonded joints of Zr702 to A516 steel"
   علي پورجعفر : First author, Reza Dehmalaie : second author, Seyed Reza Alavi zaree : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author 5
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
9. "ندارد"
   محسن ممبيني : First author, ياسمين حمادي : second author, Khalil Gheisari : Third author, mohsen reihanian : Fourth author, khalil Ranjbar : Author 5
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
10. "Effect of temperature on the microstructure and reactive layer of Ni/Nb joint phase in Zr702 penetration joining to A516 steel."
    علي پورجعفر : First author, Reza Dehmalaie : second author, Seyed Reza Alavi zaree : Third author, khalil Ranjbar : Fourth author, Mohammadreza Tavakoli shoushtari : Author 5
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
11. "Overheating and microstructural degradation in superheater tubes made of ASTM A213 T22"
    جاويد ناصري : First author, khalil Ranjbar : second author, Ebrahim Mosavi pour : Third author, Mohamad Zaman Atar nejadian : Fourth author, Rahim Bavi : Author 5, Masood Joyandeh kar : Author 6
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
12. "Studying the effect of sodium chloride concentration on the corrosion behavior of polyamine corrosion inhibitors used in water boilers of sugar production industries"
    mohamad lari baghal : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author, Seyed Reza Alavi zaree : Fourth author, Rahim Bavi : Author 5, ebrahim mousavipour : Author 6, ali samimi : Author 7
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
13. "Assessment of mechanical and electrical properties of Cu-Cr-Zr base alloy with Nb addition via mechanical alloying"
    خليل جاري زاده : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, جاويد ناصري : Fourth author
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
14. "Failure analysis of first stage super heater tubes made of SA-213 T11"
    جاويد ناصري : First author, khalil Ranjbar : second author, Ebrahim Mosavi pour : Third author, Mohamad Zaman Atar nejadian : Fourth author, Rahim Bavi : Author 5, Masood Joyandeh kar : Author 6
    24th annual symposium on steel 140, 2022
15. "corrosion resistance of the galvanised coating reinforced by CeO2 and SiC particles"
    خليل سعديان : First author, khalil Ranjbar : second author, mohamad lari baghal : Third author
    24th annual symposium on steel 140, 2022
16. "On the Microstructural and Hardness Variations of the Heat Affected Zone in the AA6082-T651 Weld Joints"
    محمد جولا : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT, 2022
17. "Effect of Zr and Er additions on microstructure and mechanical properties of A composite produced by friction stir processing"
    مژده بهادري زاده : First author, khalil Ranjbar : second author
    5th national conference on materials,metallurgy and mining, 2022
18. "Effect of Zr and Er additions on hardness and wear resistance of Al-composite produced by friction stir processing"
    مژده بهادري زاده : First author, khalil Ranjbar : second author
    5th national conference on materials,metallurgy and mining, 2022
19. "Stress corrosion cracking behaviour of weld metal of 17-4 PH stain less steel in overaged condition"
    علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    10th International Conference on Materials Science & Metallurgical Engineering (iMat2021), 2021
20. "ندارد"
    عبدالله علي پور : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author, Mohammadreza Tavakoli shoushtari : Fourth author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
21. "Investigation of HIC corrosion behavior of 17-4PH stainless steel joint area Over-aged"
    علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
22. "ندارد"
    عبدالله علي پور : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author, Mohammadreza Tavakoli shoushtari : Fourth author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
23. "Effect of over-aging heat treatment on microstructure and hardness of 17-4PH stainless steel"
    علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
24. "Effect of overageing heat treatment on microstructure and mechanical properties of stainless steel 17-4PH joint zone"
    علي عادليان : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    9th international conference on materials engineering and metallurgy, 2020
25. "ندارد"
    Saeed Abdolvand : First author, Mohammad mohammadinejhad : second author, مسعود رضويي : Third author, Khalil Gheisari : Fourth author, khalil Ranjbar : Author 5
    3rd National Conference on Materials Engineering, Metallurgy, 2020
26. "Effect of pulse duration on joint properties of the zirconium alloy 702 by laser pulse welding"
    ali akbar noroozi larki : First author, khalil Ranjbar : second author, Seyed Mohsen Sadrossadat Zadeh : Third author, Mehdi Rafiee : Fourth author
    هشتمین کنفرانس بین المللی مهندسی مواد و متالورژی, 2019
27. "Effect of pulse duration on joint properties of the hastelloy alloy c-276 by laser pulse welding"
    ali akbar noroozi larki : First author, khalil Ranjbar : second author, Seyed Mohsen Sadrossadat Zadeh : Third author, Mehdi Rafiee : Fourth author
    هشتمین کنفرانس بین المللی مهندسی مواد و متالورژی, 2019
28. "Effect of Mn-Nitrate and CTAB surfactant on physical properties of sintered alumina powder synthesised by sol-gel route"
    Zeynab Nouri Bonvar Nazer : First author, khalil Ranjbar : second author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
29. "corrosion behaviour of the 17-4 PH steel in Amine medium"
    Maryam Kahvazi : First author, khalil Ranjbar : second author, Shapour Moradi : Third author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
30. "Diffusion bonding of stabilized zirconia ceramics to titanium"
    iman seydi : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    2th National conference on material engineering,metallurgy, mine, 2019
31. "Effect of preheating temperature on microstructure and mechanical properties of the crane rail steel using shielded metal arc welding"
    mohammad faghfoori : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author, amir Hossieni kalorazi : Fourth author
    4th international conference on innovation in science and technology, 2018
32. "Effect of compaction pressure and MnO2 on densification tetragonal zirconia"
    iman seydi : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    کنفرانس ملی مهندسی مواد، متالورژی و معدن ایران, 2018
33. "Failure analysis of an oil cooler heat exchanger tubes in an industrial unit"
    علي تقويان : First author, khalil Ranjbar : second author, Ghasem Moghadam : Third author
    18th Iranian corrosion conference, 2018
34. "Fabrication of Al5083-TiO2 surface composite by plasma oxidation"
    كيانا اسفندمز : First author, khalil Ranjbar : second author, Mehdi Khorasanian : Third author
    Internation conference on materials and metallurgical engineering, 2017
35. "Effect of preheating temperature on microstructure and mechanical properties of the crane rail steel using shielded metal arc welding"
    محمد فغفوري : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author, amir Hossieni kalorazi : Fourth author
    6th international conference on materials engineering and metallurgy (imat), 2017
36. "Microstructural study of dissimilar welding between AISi316 and X10CrMoVNb9-1 steels using filler metals of ER309L and"
    سجاد وهابي شكرلو : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    WESK conference, 2017
37. "Production of in-situ alumininum reinforced composite reinforced by Al3Ti nano particles by friction stir processing (FSP)"
    مجتبي زادعلي محمدكوتياني : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    WESK conference, 2017
38. "Assessment of hydrogen attack in superheater boiler tubes in liquid and liquid-gas station of Gachsaran"
    ارزو فيروزه : First author, khalil Ranjbar : second author, mohamad lari baghal : Third author
    5th International Conference on Materials Engineering and Metallurgy, 2016
39. "Effect of cerium oxide addition on mechanical and corrosion behavior of Al-4.5% Mg Aluminum alloy produced by powder metallurgy route"
    سارا رستگارنيا : First author, khalil Ranjbar : second author, Khalil Gheisari : Third author, Gholam Hosien Borhani : Fourth author
    5th International Conference on Materials Engineering and Metallurgy, 2016
40. "Failure analysis of a boiler tube made of ASTM A213 Gr.T12"
    ارزو فيروزه : First author, khalil Ranjbar : second author, Anayat Allah Mohmi : Third author
    the second national and international conference on oil, gas, refining and petrochemical industerieswith on sustainable development, 2015
41. "Corrosion behavior of Al-6Mg alloy under different heat treatment conditions"
    Mohammad Dashtbozorg : First author, khalil Ranjbar : second author, سجاد وهابي شكرلو : Third author
    4th international conference and 9th congress Iranian metallurgical engineering society and Iranian foundaryman society, 2015
42. "Study on the effect of Nb2O3 and Cr2O3 additions on sinter density and microstructure of Al2O3-ZrO2 composite"
    Hossien Kharazmipour : First author, khalil Ranjbar : second author
    Modern Achievments on Aerospace and Related Sciences, 2015
43. "Evaluation of microstructure and mechanical properties of Al/ MWCNTs nanocomposite fabricated by friction stir processing"
    Seyed Ali Hosseini : First author, khalil Ranjbar : second author
    3rd international engineering materials and metallurgyconference, 2014
44. "Microstructure and mechanical properties of Al5083/CeO2 fabricated by FSP, 22nd international conference on mechanical engineering"
    Seyed Ali Hosseini : First author, khalil Ranjbar : second author, mostafa amra : Third author, Reza Dehmalaie : Fourth author
    The 22nd annual international conference on mechanical engineering, 2014
45. "Microstructure and mechanical properties of Al5083/SiC nanocomposites by FSP"
    mostafa amra : First author, khalil Ranjbar : second author, Seyed Ali Hosseini : Third author, Reza Dehmalaie : Fourth author
    The 22nd annual international conference on mechanical engineering, 2014
46. "Mechanical properties of dissimilar weldment of low alloy X-80 steel to 2205 duplex stainless steel by using PCGTAW"
    mohammadsaeed raeesi sarani : First author, Reza Dehmalaie : second author, khalil Ranjbar : Third author
    The 22nd annual international conference on mechanical engineering, 2014
47. "Artificial neural netwok modeling of pitting in Al-alloy 5083"
    arash bakhteyari : First author, khalil Ranjbar : second author, Ali Ashrafi : Third author
    the second international and the seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, 2013
48. "effect of pin velocity in friction stir processing on microstructure and corrosion behaviour of 5083 H32 ALLOY"
    Seyed Ali Hosseini : First author, khalil Ranjbar : second author, mostafa amra : Third author, Reza Dehmalaie : Fourth author
    1st National Conference on nonferrous metals and alloys, 2013
49. "ُEffect of synthetic persian golf water on corrosion behaviour of 5083 Al alloy"
    arash bakhteyari : First author, khalil Ranjbar : second author, Emad Talbi gongani : Third author, Ali Ashrafi : Fourth author
    1st National Conference on nonferrous metals and alloys, 2013
50. "Three dimensional simulation of flow and heat transfer in the first stage nozzle of GE-F9"
    MOJTABA ZABIHI : First author, Ebrahim Hajidavalloo : second author, Shapour Moradi : Third author, khalil Ranjbar : Fourth author
    21st International Conference on Mechanical Engineering, 2013
51. "Synthesis of Cu-Zn nanoparticles by electric arc discharge"
    Mansoor Farbod : First author, alireza mohammadian : second author, khalil Ranjbar : Third author
    20th iranian congress on crystallography and mineralogy, 2013
52. "affect of grain refiner Al-5T1-B and Sr on casting structure of Al-7Si"
    Faraz Shirazi : First author, khalil Ranjbar : second author, Pejman Mellali : Third author
    The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Sociaty and Iranian Foundrymen's Society, 2012
53. "مطالعه خواص سایشی و مکانیکی جوش تعمیری فولاد زنگ نزن ماتنزیتی 420 به روش GTAW"
    Shekoofeh Tajalaie : First author, khalil Ranjbar : second author, Mehdi Azizieh : Third author
    The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Sociaty and Iranian Foundrymen's Society, 2012
54. "ندارد"
    Majid Abasi : First author, Seyed Mohammad Mir Hosseini : second author, khalil Ranjbar : Third author, naser habibollahi : Fourth author, Khalil Gheisari : Author 5, seyed mehran yazdanina : Author 6
    The First International and the Sixth Joint Conference of Iranian Metallurgical Engineering Sociaty and Iranian Foundrymen's Society, 2012
55. "ارزیابی منطقه انتقالی در اتصال غیر همجنس فولاد کمآلیاژ فریتی A240-TP. به فولاد زن گنزن آستنیتی 316 A387 -Gr.11"
    sayadhosain mirkarimi : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    The first international conference of oil, gas, petrochemical and power plant, 2012
56. "تخریب در پره هاي توربین بخار کم فشار"
    khalil Ranjbar : First author, Mohammad Peernia : second author
    The first international conference of oil, gas, petrochemical and power plant, 2012
57. "ارزیابی خواص مکانیکی و منطقه مخلوط نشده در اتصال غیر همجنس فولادA240-TP. به فولاد زن گنزن آستنیتی 316 A387 -Gr. کمآلیاژ فریتی 11"
    sayadhosain mirkarimi : First author, khalil Ranjbar : second author, Reza Dehmalaie : Third author
    The first international conference of oil, gas, petrochemical and power plant, 2012
58. "hardfacing of LP steam turbine blade made of 15X11M with stellite6 using TIG"
    Mohammad Peernia : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    13th national conference of surface engineering, 2012
59. "Effects of feed water parameters on failure of the steam turbine blades in a power plant"
    khalil Ranjbar : First author, Mohammad Peernia : second author, Shapour Moradi : Third author, Ebrahim Hajidavalloo : Fourth author
    پنجمین همایش مشترک انجمن مهندسین متالورژی ایران و انجمن علمی ریخته گری ایران, 2011
60. "Failure analysis of pre-heating crude oil tubes in a desalting plant"
    Arsalan Abasi : First author, Ebrahim Najafi Birgani : second author, khalil Ranjbar : Third author
    12th National corrosion congress, 2011
61. "Failure analysis of a air cooler tubes made of A-214 steel in a gas boosting station"
    Hassan Esmaeili : First author, khalil Ranjbar : second author, Ali Ashrafi : Third author, Mohammadreza Abbasi : Fourth author, Mohammadreza Zohrabie : Author 5, Hamid Kavyan : Author 6, Seyed Hassan Ghafouriyazdi : Author 7
    Steel Symposium 89, 2011
62. "Affect of time and angle of incident on erosion of Al-Si alloy and its mechanisms"
    Behrouz Alami : First author, ali Esfahanian : second author, khalil Ranjbar : Third author
    4th joint conference of Iranian Metallurgical Engineers Society & Iranian, Foundaryman Society, 2010
63. "Evaluating the mechanical properties of Al-1060 after severe plastic deformation through semi constrained groove pressing (SCGP)"
    Sobhan Moratab : First author, khalil Ranjbar : second author, mohsen reihanian : Third author, Abdolali Pooladgar : Fourth author
    4th joint conference of Iranian Metallurgical Engineers Society & Iranian, Foundaryman Society, 2010
64. "Failure assessment of drilling wires"
    Seyed MohammadAli Tayeb zadeh : First author, khalil Ranjbar : second author, Shapour Moradi : Third author, ehsan Makvandi : Fourth author
    11ٰth manufacturing Congress of iran, 2010
65. "studies corrosion behavior of electroless ceramic coating in Al-5083 alloy in sea water"
    alireza hedayatee : First author, khalil Ranjbar : second author, Mohammadreza Tavakoli shoushtari : Third author
    The third joint conference of iranian metallurgical engineers society and iranian foundry society, 2009
66. "Abrasive wear behavior of 17-4PH stainless steel using pin-on-disk method"
    Mohammadreza Tavakoli shoushtari : First author, khalil Ranjbar : second author
    The third joint conference of iranian metallurgical engineers society and iranian foundry society, 2009
67. "Failure analysis and materials selection of a Booster pump"
    seyed mohammad mousavie : First author, khalil Ranjbar : second author, ali alavi : Third author, ?? mahmodi : Fourth author
    11th national congress on corrosion, 2009
68. "corrosion resistance of stainless steel 316L by conductive multy layer polymeric PSS/PDDA coating"
    Majid Sababi : First author, ahmad zafaree : second author, khalil Ranjbar : Third author
    11th national congress on corrosion, 2009
69. "Failure analysis of low pressure torbine blades made of EP428 steel"
    masoud roshanee : First author, khalil Ranjbar : second author, reza bayatzadeh : Third author
    11th national congress on corrosion, 2009
70. "Effect of different parameters on Failure of Rotor coating in down hole motors"
    meysam zarchie : First author, khalil Ranjbar : second author, Majid Sababi : Third author
    11th national congress on corrosion, 2009
71. "Statical failure analysis of steel rotors"
    meysam zarchie : First author, khalil Ranjbar : second author, Majid Sababi : Third author, Ali Ashrafi : Fourth author, ali ghafeli nejad : Author 5, Bager Badie rad : Author 6
    steel samposium 87, 2009
72. "effect of Aging Heat treatment on Sliding wear behavior of 17-4 PH Stainless steel"
    Mohammadreza Tavakoli shoushtari : First author, khalil Ranjbar : second author, Mohammad Hadi Moayed : Third author
    Symposium steel 87, 2009
73. "Failure analysis of steel components in an industerial plant under different working conditions"
    ali alavi : First author, khalil Ranjbar : second author, seyed mohammad mousavie : Third author
    steel samposium 87, 2009
74. "An affect of aging on sliding wear of stainless steel grade 17-4 PH"
    mohammadreza tavakolie shoshtaree : First author, khalil Ranjbar : second author, Mohammad Hadi Moayed : Third author
    steel samposium 87, 2009
75. "corrosion control of stainless steel by multy layer nanofilms"
    Majid Sababi : First author, ahmad zafaree : second author, khalil Ranjbar : Third author
    steel samposium 87, 2009
76. "Failure analysis of tangusten carbide rolls in mono blocks"
    saied torfi : First author, khalil Ranjbar : second author
    Symposium steel 87, 2009
77. "Sliding wear and erosion behaviour of Al 5083 alloy"
    khalil Ranjbar : second author
    9th Iranian national Seminar on surface engineering and heat treatment, 2008
78. "Sliding wear and erosion behaviour of Al 5083 alloy"
    Mohammadreza Tavakoli shoushtari : First author, khalil Ranjbar : second author
    9th Iranian national Seminar on surface engineering and heat treatment, 2008
79. "Effect of pearlitic interlamellar spacing on tribological behaviour of 1080 steel"
    Mohammadreza Tavakoli shoushtari : First author, khalil Ranjbar : Third author, خلیل رنجبر : نویسنده سوم
    8th iranian national seminar on surface engineering & heat treatment, 2007
80. "بررسي تأثير فاصله بين لايه‌اي پرليت در فولاد 1080 بر خواص تريبولوژيكي آن"
    Mohammadreza Tavakoli shoushtari : First author, khalil Ranjbar : Third author, خلیل رنجبر : نویسنده سوم
    8th iranian national seminar on surface engineering & heat treatment, 2007
81. "بررسي خصوصيات تريبولوژيكي آلياژپيستون ريخته‌گري شده A1-Si"
    rezaali asgarian : First author, mohsen karimi : second author, khalil Ranjbar : Third author
    ششمین همایش علمی- دانشجویی مهندسی مواد و متالوژی(آبان‌ماه), 2006
82. "بررسي سايش delamination فولاد دوفازي در مقايسه با فولاد نرماله و مارتنزيتي"
    Vahid Abuee : First author, Hassan Saghafian : second author, shahram khirandish : Third author, khalil Ranjbar : Fourth author
    دهمین کنگره سالانه انجمن مهندسین متالوژی ایران(آبان‌ماه), 2006
83. "مطالعه و بررسي نفوذ در فصل مشترك بوش‌هاي برنز-فولادي"
    golamhosaan najaryan : First author, Gholamhossain Borhani : second author, khalil Ranjbar : Third author, golamhosaan najaryan : Presnter
    سمپوزیوم فولاد84(اسفندماه), 2005
84. "بررسي تأثير مواد افزودني NaOH و پريدور بر كيفيت گندله‌هاي سنگ آهن"
    nazanna forozanfer : First author, khalil Ranjbar : second author, daruosh khdame : Third author, nazanna forozanfer : Presnter
    سمپوزیوم فولاد84(اسفندماه), 2005
85. "بررسي تأثير ناخالصي‌هاي آب تغذيه بر خوردگي لوله‌هاي بويلر"
    khalil Ranjbar : First author, nasem naseryan : second author
    هشتمین کنگره سالانه انجمن مهندسین متالوژی ایران(مهرماه), 2004
86. "تاثير افزودن اكسيد نقره بر خصوصيات مكانيكي كامپوزيت‌هاي آلومينا-منيزيا"
    eaman abrahemzada : First author, khalil Ranjbar : second author
    سومین همایش علمی - دانشجویی مهندسی مواد و متالوژی (مهرماه), 2003
87. "توليد گندله هاي پيش احيائي Pre - reduced Pellets"
    khalil Ranjbar : First author, daruosh khdame : second author
    c, 1999
88. "Compressive strength and microstructural behavior of Ti6Al4V powders consolidated by spark plasma sintering"
    پرستو مغازه ئي : First author, khalil Ranjbar : second author, جاويد ناصري : Third author
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
89. "Preparation and characterization of Al- 4.5 Mg alloy by mechanical alloying"
    سارا رستگارنيا : First author, khalil Ranjbar : second author, Khalil Gheisari : Third author
    Iran international aluminum conference 2016, 2016
90. "Characterization of Al5083/SiC surface nano composite fabricated by friction stir processing"
    mostafa amra : First author, khalil Ranjbar : second author
    3rd international engineering materials and metallurgyconference, 2014
91. "Composite oxide Zn nano-sized particles obtained by reduction reaction of ZnO and Al powder mixture."
    alireza hedayatee : First author, zahra golestan : second author, khalil Ranjbar : Third author, Gholam Hosien Borhani : Fourth author
    The 1st International Conference on Composites: Charactrization, Fabrication and Application (CCFA-1), 2008
92. "Microstructural Evaluation of Zirconia Dispersed Alumina Composites"
    khalil Ranjbar : First author
    first international conference on composite, characterization, production and application, 2008
93. "On materials selection and dezinfication of a tubular heat exchanger"
    khalil Ranjbar : First author, Reza Jadidian : second author, Fatemeh Khabazi pour : Third author
    23rd international power system conference, 2008
94. "Synthesis of Sr-Hexaferrite Nano-Powder by Sol-Gel Auto-Combustion Process with Addition of Organic Matters into Precursor Solution"
    M.G.Hasab G. Hasab : First author, S.A. Sayyed Ebrahimi : second author, ّAli Badiei : Third author, khalil Ranjbar : Fourth author
    International Conference on Nano-Science and Nano-Technology 2008 (Nano-SciTech 2008), 2008
95. "پايدارسازي پودر زيركونياي تتراگونال در دماي اتاق"
    mahdei gabeti : First author, khalil Ranjbar : second author
    سومین همایش علمی - دانشجویی مهندسی مواد و متالوژی (مهرماه), 2003