Journal Paper

1. "Investigation the Effect of Welding Heat Input on Microstructure and Mechanical Properties of AISI310 Stainless Steel and API5LX60 Low Alloy Steel Dissimilar Joint"
   عبدالحسين ساعدي : First author, Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author
   مجله مهندسی مکانیک دانشگاه تبریز, pp.107-114, 2020
2. "Improvement of Impact Toughness of API-X70 Steel Weld metals With Electromagnetic Vibration"
   Reza Dehmalaie : second author, Esmaeil Hajjari : Third author
   journal of welding science and technology of Iran, pp.93-104, 2019
3. "Experimental and numerical investigations of the octagonal concrete-filled thin-walled tube columns with binding bars (O-CFT-WBB) under compressive pressure and thermal loads"
   Mojtaba Labib zadeh : First author, سيدمهران محمدي وکيل : second author, Farhad Hosseinlou : Third author, Majid Khayat : Fourth author, Esmaeil Hajjari : Author5
   Journal of Constructional Steel Research, pp.1-16, 2024
4. "Elevated temperature tensile behavior of S900 HSLA steel and its welded joints"
   mohammad narimani : First author, Esmaeil Hajjari : second author, Moustafa Eskandari : Third author, Jerzy A. Szpunar : Fourth author
   Journal of Constructional Steel Research, pp.1-13, 2023
5. "Microstructure and high temperature performance of titanium modified aluminide coatings applied on GTD-111 superalloy during the rejuvenation heat treatment"
   Mohammad Bahadori : First author, Esmaeil Hajjari : second author
   Materials at High Temperatures, pp.363-379, 2022
6. "Electron Backscattered Diffraction Characterization of S900 HSLA Steel Welded Joints and Evolution of Mechanical Properties"
   mohammad narimani : First author, Esmaeil Hajjari : second author, Moustafa Eskandari : Third author, Jerzy A. Szpunar : Fourth author
   Journal of Materials Engineering and Performance, pp.1-13, 2022
7. "Investigation of the Effect of Preweld Heat Treatment on the Liquation Cracking of GTD-111 Superalloy"
   حسين ناصري : First author, Seyed Mohsen Sadrossadat Zadeh : second author, Esmaeil Hajjari : Third author
   Materials Transactions, pp.903-908, 2020
8. "Effect of rejuvenation heat treatment on microstructure and hot corrosion resistance of a service-exposed nickel-based gas turbine blade"
   عاطفه جمالپور : First author, Esmaeil Hajjari : second author, mohamad lari baghal : Third author
   MATERIALS RESEARCH EXPRESS, pp.1-11, 2020
9. "Mechanical properties of steel welds at elevated temperatures"
   ِAbbas Rezaeian : First author, محمود كشاورز : second author, Esmaeil Hajjari : Third author
   Journal of Constructional Steel Research, 2019
10. "Premature damage of the second stage nozzle guide vanes of a gas turbine made of Inconel 738LC"
    رضا چهارلنگ : First author, Esmaeil Hajjari : second author, mohamad lari baghal : Third author, Mehran Siahpoosh : Fourth author
    Engineering Failure analysis, pp.803-816, 2019
11. "Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints"
    عبدالحسين ساعدي : First author, Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.5497-5508, 2018
12. "Failure Assessment of the First Stage Blade of a Gas Turbine Engine"
    Behnam Salehnasab : First author, Esmaeil Hajjari : second author, Seyed Ahmad Mortazavi : Third author
    transaction of indian institute of metals, pp.2103-2110, 2017
13. "Prediction of the contact time through modeling of heat transfer and fluid flow in compound casting process of Al/Mg light metals"
    morteza morkabeyan : First author, Esmaeil Hajjari : second author, ali farzadi : Third author, Seyed Reza Alavi zaree : Fourth author
    Journal of Materials Research, pp.2135-2142, 2017
14. "Dissimilar Joining of AISI 304L/St37 Steels by TIG Welding Process"
    Alireza Khalifeh : First author, Abbas Dehghan : second author, Esmaeil Hajjari : Third author
    Acta Metallurgica Sinica (English Letter), pp.721-727, 2013
15. "Effect of Melt-to-Solid Insert Volume Ratio on Mg/Al Dissimilar Metals Bonding"
    ُSeyyed Mohsen Emami : First author, Mehdi Divandari : second author, Hossein Arabi : Third author, Esmaeil Hajjari : Fourth author
    Journal of Materials Engineering and Performance, pp.123-130, 2012
16. "Effect of Applied Pressure and Nickel Coating on Microstructural Development in Continuous Carbon Fiber-Reinforced Aluminum Composites Fabricated by Squeeze Casting"
    Esmaeil Hajjari : First author, Mehdi Divandari : second author, Hossein Arabi : Third author
    Materials and Manufacturing Processes, pp.599-603, 2011
17. "Failure analysis of a shell and tube oil cooler"
    Reza Taherzadeh Mousavian : First author, Esmaeil Hajjari : second author, D Ghasemi : Third author, M Kojouri Manesh : Fourth author, khalil Ranjbar : Author5
    Engineering Failure analysis, pp.202-211, 2010
18. "The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting"
    Esmaeil Hajjari : First author, Mehdi Divandari : second author, Alireza Mirhabibi : Third author
    Materials and design, pp.2381-2386, 2010
19. "An Investigation on the Microstructure and Tensile Properties of Direct Squeeze Cast and Gravity Die Cast 2024 Wrought Al Alloy"
    Esmaeil Hajjari : First author, Mehdi Divandari : second author
    Material and Design, pp.1685-1689, 2008

Conference Paper

1. "Phase analysis of FeCoCrNiVMo0.3 high entropy alloy produced by mechanical alloying"
   ايمان صيدي : First author, Reza Dehmalaie : second author, Esmaeil Hajjari : Third author, khalil Ranjbar : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
2. "The effect of welding heat input on the microstructural evolution and mechanical properties of the heat-affected zone of S900 high-strength low-alloy steel"
   MOHAMMAD NARIMANI : First author, Esmaeil Hajjari : second author, Moustafa Eskandari : Third author, Jerzy A. Szpunar : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
3. "The effect of welding heat input heat on microstructure and mechanical properties of dissimilar joints of Durostat 450 wear-resistant steel to St 52 construction steel"
   علي نبهاني : First author, Esmaeil Hajjari : second author, Reza Dehmalaie : Third author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
4. "Investigating the premature destruction of bagasse fiber separating segments in Loh Sabz Jonoob MDF production plant"
   عبدالحسين ساعدي : First author, Esmaeil Hajjari : second author, Sayed rouhollah Mousavi : Third author, Pejman Chehrazi : Fourth author, Hosein Lovineh : Author 5
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
5. "Investigating the tensile properties and deformation behavior of S900 HSLA steel and its welded joints at elevated temperatures"
   mohammad narimani : First author, Esmaeil Hajjari : second author, Moustafa Eskandari : Third author, Jerzy A. Szpunar : Fourth author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
6. "ندارد"
   mohamad lari baghal : First author, Mohammadreza Tavakoli shoushtari : second author, ابراهيم باستي : Third author, Esmaeil Hajjari : Fourth author, Reza Dehmalaie : Author 5
   23th Steel Symposium 400, 2021
7. "ندارد"
   احسان معين زاده : First author, mohamad lari baghal : second author, Esmaeil Hajjari : Third author, hosein kharazmipoor : Fourth author
   1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
8. "Hardfacing the crane wheels by submereged arc welding method"
   حسن شمس : First author, Esmaeil Hajjari : second author, Mohammadreza Tavakoli shoushtari : Third author
   1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
9. "Local corrosion of amine heat exchanger tubes made of 304 stainless steel in a natural gas sweetening unit"
   حسن قنبري عديوي : First author, Esmaeil Hajjari : second author, Khalil Gheisari : Third author
   1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
10. "Investigation the effect of preweld heat treatment variables on distortion, residual stress and microstructure of In738LC used gas turbine nozzles"
    راحيل مهرخو : First author, Esmaeil Hajjari : second author, mohamad lari baghal : Third author
    9th international conference on materials engineering and metallurgy, 2020
11. "Influence of preweld and heat of welding process on size of gamma prime particle in GTD-111 super alloy welded by gtaw"
    عادل سجادی نظر : First author, Seyed Mohsen Sadrossadat Zadeh : second author, Esmaeil Hajjari : Third author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
12. "Effect of post weld heat treatment on microstructure and impact resistance of HSLA-100 steel heat affected zone"
    Shokofeh Ariavand : First author, Esmaeil Hajjari : second author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
13. "Applying titanium modified SermaLoy J diffusion coating on Nickel-based superalloy GTD-111"
    Mohammad Bahadori : First author, Esmaeil Hajjari : second author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
14. "The effect of filler metal in tungsten carbide brazing of PDC drill bits"
    كلثوم يفالي : First author, Esmaeil Hajjari : second author, Jafar Jelokhani : Third author
    Iranian National Conference of Materials Science, Metallurgy and mining, 2018
15. "Numerical simulation of the effect of preheat and fixtures on distortion and residual stress in repair welding of Ruston TB4000 gas turbine second stage nozzle blades"
    Mohammad Sajad Rabii Zade : First author, mohamad lari baghal : second author, Esmaeil Hajjari : Third author
    6th National Gas Turbine Conference, 2018
16. "Numerical simulation of distortion and residual stress in repair welding of Ruston TB4000 gas turbine second stage nozzle blades"
    Mohammad Sajad Rabii Zade : First author, Esmaeil Hajjari : second author, mohamad lari baghal : Third author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
17. "High Temperature and Residual Tensile Properties of EN S700M High Strength Low Alloy Steel"
    amirhoseyn ghobadpour : First author, Esmaeil Hajjari : second author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
18. "Effect of heat input and filler metal on mechanical behavior of forged CK30 steel welds prepared by gas tungsten arc welding"
    رضا سلام محمره : First author, Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
19. "production and characterization of tensile strength of A356-3%SiC composite in stir casting process"
    Ali Hamid : First author, Esmaeil Hajjari : second author
    The 3 rd national conferences..., 2017
20. "The effect of stir casting surface slope on tensile strength of A356-3%SiC composite"
    Ali Hamid : First author, Esmaeil Hajjari : second author
    The 3 rd national conferences..., 2017
21. "Repairment and Reconstruction of Lifting Equipments in Drilling Rig"
    Alireza Daneh-Dezfuli : First author, Esmaeil Hajjari : second author, Shapour Moradi : Third author, Seyed Mohsen Sadrossadat Zadeh : Fourth author
    First regional conference on welding and inspection in Khozestan, 2017
22. "Investigation the microstructure and hardness of Cu-7.5 Sn phosphor bronze alloy deposited on 4140 low alloy steel by SMAW and OFW processes"
    امير عبداله ابادي : First author, Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author, Reza Hasan zadeh : Fourth author
    First regional conference on welding and inspection in Khozestan, 2017
23. "Liquation cracking of Ni base precipitation hardanable alloys"
    Hossein Naseri : First author, Seyed Mohsen Sadrossadat Zadeh : second author, Esmaeil Hajjari : Third author
    1st domestic khouzestan weld and inspection conference, 2017
24. "Study the mechanical properties and weldability of high strength thermomechanical alform steel"
    M M : First author, MOHAMMAD NARIMANI : second author, Esmaeil Hajjari : Third author
    1st regional conference on welding engineering and technical inspection of Khozestan, 2017
25. "The Effect of Probe Scanning Angle on Detection of Defects in ST37 Steel Pipe Using Ultrasonic Testing Simulation"
    a k : First author, Esmaeil Hajjari : second author
    WESK conference, 2017
26. "Evaluate the corrosion behavior of convection tubes in a water tube boiler welded by GTAW process"
    عبدالحسين ساعدي : First author, Esmaeil Hajjari : second author, saman regali : Third author, Esmaeil Ghanbari : Fourth author, Pejman Chehrazi : Author 5
    WESK conference, 2017
27. "Evaluation of microstructure and mechanical properties of welded tubes convection in the water tube boilers"
    عبدالحسين ساعدي : First author, Esmaeil Ghanbari : second author, Pejman Chehrazi : Third author, Esmaeil Hajjari : Fourth author, saman regali : Author 5
    WESK conference, 2017
28. "Effect of Heat input on Toughness and Fracture Energy of the weldment in AISI 310 / API X60 Dissimilar Joining by GTAW process"
    Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author, عبدالحسين ساعدي : Presnter
    4th International Engineering Materials & Metallurgy Conference, 2015
29. "Selection of a Suitable Filler Metal for AISI 310/API X60 Dissimilar Joining by GTAW Process"
    Esmaeil Hajjari : second author, Seyed Mohsen Sadrossadat Zadeh : Third author, عبدالحسين ساعدي : Presnter
    4th International Engineering Materials & Metallurgy Conference, 2015
30. "Microstructural Changes of an IN738 Ruston TB4000 Gas Turbine Blade after Operation at Elevated Temperature"
    عاطفه جمالپور : First author, Esmaeil Hajjari : second author, Vahid Zare : Third author
    6th Conference on Rotating Equipment in Oil & Power Industries, 2015
31. "Repair of In 738 gas turbine blade by GTAW process"
    Seyed Farzad Teymori : First author, Sajjad Shah Amiri : second author, Esmaeil Hajjari : Third author
    15 national conference on welding & inspection & 4 national conference on NDT, 2014
32. "Simulation of dissimilar bonding conditions of Al/Mg metals in compound casting process"
    morteza morkabeyan : First author, Esmaeil Hajjari : second author, Seyed Reza Alavi zaree : Third author, ali farzadi : Fourth author
    the second international and the seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, 2013
33. "The effect of galvanic contact on corrosion of Karkhe water-power plant oil coolers"
    Reza Taherzadeh : First author, Mohammad hasan Hojjat zadeh : second author, Esmaeil Hajjari : Third author, Shahryar Sharafi : Fourth author
    11th national congress on corrosion, 2009
34. "The effect of titanum and vanadum on graphite morphology and the the eutectic transformation temprature of gray cast Irons"
    Esmaeil Hajjari : First author, aliraza khlefe : second author, جعفر راثی زاده غنی : نویسنده سوم
    Symposium steel 87, 2009
35. "اثر تيتانيوم و واناديم بر تغييرات سختي چدن خاكستري در اثر كاركرد در دماهاي بالا"
    aliraza khlefe : First author, Esmaeil Hajjari : second author, jafar raae zadeh ghani : Third author
    هفتمین سمینار ملی مهندسی سطح و عملیات حرارتی (اردیبهشت‌ماه), 2006