1. E. Hajjari, M. Divandari, A.R. Mirhabibi, "The Study of Electroless Coating of Nickel on Carbon Fibers", Iranian Journal of Materials Science & Engineering, Vol. 1, No. 1, 2004, pp. 43-48.

2. E. Hajjari, M. Divandari, "An Investigation on the Microstructure and Tensile Properties of Direct Squeeze Cast and Gravity Die Cast 2024 Wrought Al Alloy", Materials & Design, Vol. 29, 2008, pp. 1685-1689.

3. E. Hajjari, M. Divandari, A.R. Mirhabibi, "The Effect of Applied Pressure on Fracture Surface and Tensile Properties of Nickel Coated Continuous Carbon Fiber Reinforced Aluminum Composites Fabricated by Squeeze Casting", Materials & Design, Vol. 31, 2010, pp. 2381-2386.

4. E. Hajjari, M. Divandari, H. Arabi, "Effect of Applied Pressure and Nickel Coating on Microstructural Development in Continuous Carbon Fiber-Reinforced Aluminum Composites Fabricated by Squeeze Casting", Materials and Manufacturing Processes, Vol. 26, 2011, pp. 599-603.

5. R. Taherzade Mousavian, E. Hajjari, D. Ghasemi, M. Kojouri Manesh, K. Ranjbar, "Failure analysis of a shell and tube oil cooler", Engineering Failure Analysis, Vol. 18, 2011, pp. 202-211.

6. E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, S. Kamado, "Estimation of the transient interfacial heat flux between substrate/melt at the initiation of magnesium solidification on aluminum substrates using the lumped capacitance method", Applied Surface Science, Vol. 257, 2011, pp. 5077-5082.

7. E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, T. Homma, S. Kamado, "Dissimilar joining of Al/Mg light metals by compound casting process", Journal of Materials Science, Vol. 46, 2011, pp. 6491-6499.

8. E. Hajjari, M. Divandari, S.H. Razavi, T. Homma, S. Kamado, "Intermetallic compounds and antiphase domains in Al/Mg compound casting", Intermetallics,  Vol. 23, 2012, pp. 182-186.

9. E. Hajjari, M. Divandari, S.H. Razavi, T. Homma, S. Kamado, "Microstructure characteristics and mechanical properties of Al 413/Mg joint in compound casting process", Metallurgical and Materials Transactions A, Vol. 43, 2012, pp. 4667-4677.

10. S.M. Emami, M. Divandari, H. Arabi, E. Hajjari,  "Effect of melt to solid insert volume ratio on Mg/Al dissimilar metals bonding", Journal of Materials Engineering and Performance, Vol. 22, 2013, pp. 123-130. 

11. S.M. Emami, M. Divandari, E. Hajjari, H. Arabi, "Comparison between conventional and lost foam compound casting of Al/Mg light metals", International Journal of Cast Metals Research, Vol. 26, 2013, pp. 43-50.