menu
Shapour Moradi

Professor

Update: 2025-03-03

Shapour Moradi

دانشکده مهندسی / گروه مکانیک

Journal Paper

  1. "Effects of position and shape of cutout on the axial buckling load of composite cylindrical panel"
    Davood Poorveis : First author, Amin Khajehdezfuly : second author, Shapour Moradi : Third author
    Amirkabir Journal of Mechanical Engineering, pp.2879-2898, 2020
  2. "Crack Identification in Postbuckled Plates Using Differential Quadrature Element Method and Sequential Quadratic Programming"
    hesam makvandi : First author, Shapour Moradi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    Amirkabir Journal of Mechanical Engineering, pp.1-11, 2019
  3. "Study on Free Vibration of Buckled Cracked Plates Using Differential Quadrature Element Method"
    hesam makvandi : First author, Shapour Moradi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    journal of Solids and Fluids, pp.67-83, 2019
  4. "Study on Effects of Initial Imperfection and Pre & Post-buckling Deformations on Vibration of Plates"
    hesam makvandi : First author, Shapour Moradi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    مجله مهندسی مکانیک دانشگاه تبریز, pp.309-318, 2018
  5. "Crack detection in beams using Hilbert-Huang Transform"
    mohammad reza gale ban : First author, Shapour Moradi : second author
    Journal of Modeling in Engineering, pp.27-40, 2018
  6. "Finite element model updating using operational modal analysis and bees optimization algorithm"
    علي موري-پويان : First author, Shapour Moradi : second author, Rahim Chinipardaz : Third author
    journal of Solids and Fluids, pp.117-133, 2017
  7. "Numerical and Experimental Analysis of Free Vibration of Post-buckled Beam"
    Peyman Jamshidi Moghadam : First author, Shapour Moradi : second author
    نشریه امیر کبیر, pp.71-82, 2016
  8. "transient stress distribution in due to fiber breakage in single lap adhesive joints"
    mohammad shishesaz : First author, Shapour Moradi : second author, saeed yaghobi : Third author
    journal of Solids and Fluids, pp.113-126, 2014
  9. "FREE VIBRATION ANALYSIS OF CRACKED POST-BUCKLED BEAM BY DIFFERENTIAL QUADRATURE METHOD"
    Peyman Jamshidi Moghadam : First author, Shapour Moradi : second author
    Journal of Modeling in Engineering, pp.1-14, 2013
  10. "Free vibration analysis of drillstring by differential quadrature method"
    Shapour Moradi : First author, Hossain Hakimi : second author
    Journal of Applied Mechanics, pp.87-95, 2012
  11. "Evaluation of stress concentration factor in drill string torsional conections"
    Amin Behdarvndi : First author, Shapour Moradi : second author
    اکتشاف و تولید نفت و گاز, pp.48-52, 2012
  12. "Finite Element Model Updating of a Z-shaped piping system by Modal Testing"
    Laleh Fatahi : First author, Shapour Moradi : second author, Pejman Razi : Third author
    Sharif Mechanical Engineering, pp.85-91, 2011
  13. "An accurate approach for buckling analysis of stringer stiffened laminated composite cylindrical shells under axial compression"
    Davood Poorveis : First author, Amin Khajehdezfuly : second author, محمدرضا سرداري : Third author, Shapour Moradi : Fourth author
    STEEL AND COMPOSITE STRUCTURES, pp.545-562, 2024
  14. "Effect of crack characteristics on the vibration behavior of post-buckled functionally graded plates"
    Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Structures, pp.181-199, 2023
  15. "A new bladed assembly simulator and an improved two-parameter plot method for blade tip-timing numerical simulations"
    مسعود نيك پور : First author, Shapour Moradi : second author, ايمان سودمند : Third author
    Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, pp.2135-2144, 2022
  16. "Free Vibrational Analysis of a Functionally Graded Five-Layer Sandwich Plate Resting on a Winkler Elastic Foundation in a Thermal Environment"
    mohammadreza kardouni : First author, mohammad shishesaz : second author, Shapour Moradi : Third author, Reza Mosalmani : Fourth author
    Journal of Composites Science, pp.325-351, 2022
  17. "Nonlinear system identification based on restoring force transmissibility of vibrating structures"
    امير علي صادقي : First author, Shapour Moradi : second author
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, pp.1-23, 2022
  18. "Buckling analysis of composite conical shells reinforced by agglomerated functionally graded carbon nanotube"
    keyvan eskandari charati : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    Archives of Civil and Mechanical Engineering, pp.1-13, 2022
  19. "Stress analysis of the five layer circular sandwich plate subjected to uniform distributed load by layerwise theory along with second order shear deformation theory"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    Australian Journal of Mechanical Engineering, pp.625-636, 2022
  20. "Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load"
    Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.256-270, 2021
  21. "A novel evolutionary optimization algorithm inspired in the intelligent behaviour of the hunter spider"
    bahrooz ataran : First author, Afshin Ghanbarzadeh : second author, Shapour Moradi : Third author
    International Journal of Computer Mathematics, pp.627-655, 2021
  22. "Nonlinear subspace system identification based on output-only measurements"
    امير علي صادقي : First author, Shapour Moradi : second author, Kourosh Heidari Shirazi : Third author
    JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS, pp.12904-12937, 2020
  23. "Time-domain model identification based on reduced output data"
    امير علي صادقي : First author, Shapour Moradi : second author
    ISA Transactions, pp.1-13, 2020
  24. "The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame"
    محمد صداقتي : First author, Laleh Fatahi : second author, Shapour Moradi : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, 2020
  25. "Damped DQE Model Updating of a Three-Story Frame Using Experimental Data"
    Laleh Fatahi : First author, Shapour Moradi : second author, Ali Hajnayeb : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.1-11, 2020
  26. "Analysis of ride comfort of a continuous tracked bogie system with variable configuration"
    ايمان سودمند : First author, Kourosh Heidari Shirazi : second author, Shapour Moradi : Third author
    Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, pp.1-11, 2020
  27. "Stress distribution in a five-layer circular sandwich composite plate based on the third and hyperbolic shear deformation theories"
    mohammad shishesaz : First author, hamed raeesi : second author, Shapour Moradi : Third author
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.927-940, 2020
  28. "A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain"
    بهروز عطاران : First author, Afshin Ghanbarzadeh : second author, Shapour Moradi : Third author
    International Journal of Engineering, pp.668-675, 2020
  29. "Detectability conditions for output-only subspace identification"
    امير علي صادقي : First author, Shapour Moradi : second author, Kourosh Heidari Shirazi : Third author
    MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS, pp.55-79, 2020
  30. "A SIMPLE SPLINE FINITE STRIP FOR BUCKLING ANALYSIS OF COMPOSITE CYLINDRICAL PANEL WITH CUTOUT"
    Davood Poorveis : First author, Amin Khajehdezfuly : second author, Shapour Moradi : Third author, الهه شيرشكن : Fourth author
    Latin American Journal of Solids and Structures, pp.1-26, 2019
  31. "System Identification Based on Output-Only Decomposition and Subspace Appropriation"
    امير علي صادقي : First author, Shapour Moradi : second author, Kourosh Heidari Shirazi : Third author
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, pp.1-14, 2019
  32. "Stress distribution in a five-layer sandwich plate with FG face sheets using layerwise method"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1234-1244, 2019
  33. "Numerical analysis of the counter-intuitive dynamic behavior of the elastic-plastic pin-ended beams under impulsive loading with regard to linear hardening effects"
    mehdi shamsalizade : First author, Kourosh Heidari Shirazi : second author, Shapour Moradi : Third author, Hamid Mohammad-Sedighi : Fourth author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.4588-4600, 2018
  34. "Global sensitivity analysis improvement of rotor-bearing system based on the Genetic Based Latine Hypercube Sampling (GBLHS) method"
    محمدرضا فاتحي پيكاني : First author, Afshin Ghanbarzadeh : second author, Shapour Moradi : Third author, Ali Hajnayeb : Fourth author
    Structural Engineering and Mechanics, pp.549-561, 2018
  35. "Determination of Random Matrices Dispersion Parameters for Nonparametric Modeling of Stochastic Dynamic Systems with Experimental Verification"
    محمدرضا فاتحي پيكاني : First author, Afshin Ghanbarzadeh : second author, Shapour Moradi : Third author, Ali Hajnayeb : Fourth author
    International Journal of Applied Mechanics, pp.1-22, 2018
  36. "Free vibration analysis of cracked postbuckled plate"
    Shapour Moradi : First author, hesam makvandi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    Applied Mathematical Modelling, pp.611-627, 2018
  37. "Updating Finite Element Model Using Stochastic Subspace Identification Method and Bees Optimization Algorithm"
    علي موري-پويان : First author, Shapour Moradi : second author, Rahim Chinipardaz : Third author
    Latin American Journal of Solids and Structures, pp.1-19, 2018
  38. "Vibration Analysis of Elastic Beams With Unconstrained Partial Viscoelastic Layer"
    امير علي صادقي : First author, Shapour Moradi : second author
    International Journal of Acoustics and Vibration, pp.65-73, 2018
  39. "Differential quadrature method (DQM) for studying initial imperfection effects and pre- and post-buckling vibration of plates"
    hesam makvandi : First author, Shapour Moradi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    JOURNAL OF VIBROENGINEERING, pp.103-115, 2018
  40. "Multiple crack identification in frame structures using a hybrid Bayesian model class selection and swarm-based optimization methods"
    Laleh Fatahi : First author, Shapour Moradi : second author
    Structural Health Monitoring, pp.39-58, 2018
  41. "Multiple crack identification in frame structures using a hybrid Bayesian model class selection and swarm-based optimization methods"
    Laleh Fatahi : First author, Shapour Moradi : second author
    Structural Health Monitoring, pp.39-58, 2018
  42. "A new reference tip-timing test bench and simulator for blade synchronous and asynchronous vibrations"
    Ali Hajnayeb : First author, مسعود نيك پور : second author, Shapour Moradi : Third author, Gianluca Rossi : Fourth author
    Measurement Science and Technology, pp.1-7, 2018
  43. "Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate"
    hamed raeesi : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.233-252, 2017
  44. "A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load"
    hesam makvandi : First author, Shapour Moradi : second author, Davood Poorveis : Third author, Kourosh Heidari Shirazi : Fourth author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.185-198, 2017
  45. "Semi-Analytical Approach in Buckling Analysis of Functionally Graded Shells of Revolution Subjected to Displacement Dependent Pressure"
    majid khayat : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    Journal of Pressure Vessel Technology, pp.1-19, 2017
  46. "Characterization of the effect of joint clearance on the energy loss of flexible multibody systems with variable kinematic structure"
    Saeed Ebrahimi : First author, Esmaeil Salahshoor : second author, Shapour Moradi : Third author
    Structural Engineering and Mechanics, pp.691-702, 2017
  47. "Updating finite element model using frequency domain decomposition method and bees algorithm"
    poyan ali mori : First author, Shapour Moradi : second author, Rahim Chinipardaz : Third author
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, pp.75-88, 2017
  48. "Numerical analysis of the counterintuitive dynamic behavior of the elastic-plastic fully-clamped beams under impulsive loading"
    Mehdei Shamssalizadeh : First author, Kourosh Heidari Shirazi : second author, Shapour Moradi : Third author, Hamid Mohammad-Sedighi : Fourth author
    MECHANIKA, pp.84-91, 2017
  49. "Buckling analysis of functionally graded truncated conical shells under external displacement-dependent pressure"
    majid khayat : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    STEEL AND COMPOSITE STRUCTURES, pp.1-16, 2017
  50. "Buckling analysis of laminated composite cylindrical shell subjected to lateral displacement-dependent pressure using semi-analytical finite strip method"
    majid khayat : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    STEEL AND COMPOSITE STRUCTURES, pp.301-321, 2016
  51. "Buckling of thick deep laminated composite shell of revolution under follower forces"
    majid khayat : First author, Davood Poorveis : second author, Shapour Moradi : Third author, mona hemati : Fourth author
    Structural Engineering and Mechanics, pp.59-91, 2016
  52. "Crack identification in post-buckled beam-type structures"
    Shapour Moradi : First author, Peyman Jamshidi Moghadam : second author
    Smart Structures and Systems, pp.1233-1252, 2015
  53. "The application of the geometric offset method to the rigid joint modeling in the differential quadrature element model updating of frame structures"
    Laleh Fatahi : First author, Shapour Moradi : second author, Afshin Ghanbarzadeh : Third author
    Meccanica, pp.1509-1525, 2015
  54. "The application of the geometric offset method to the rigid joint modeling in the differential quadrature element model updating of frame structures"
    Laleh Fatahi : First author, Shapour Moradi : second author, Afshin Ghanbarzadeh : Third author
    Meccanica, pp.1509-1525, 2015
  55. "Vibration analysis of cracked post-buckled beams"
    Shapour Moradi : First author, Peyman Jamshidi Moghadam : second author
    Applied Mathematical Modelling, pp.3281-3294, 2014
  56. "Differential quadrature element model updating of frame structures"
    Laleh Fatahi : First author, Shapour Moradi : second author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.1094-1107, 2014
  57. "Differential quadrature element model updating of frame structures"
    Laleh Fatahi : First author, Shapour Moradi : second author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.1094-1107, 2014
  58. "Crack detection in circular cylindrical shells using differential quadrature method"
    Shapour Moradi : First author, vahid tavaf : second author
    International Journal of Pressure Vessels and Piping, pp.209-216, 2013
  59. "Crack detection of plate structures using differential quadrature method"
    Shapour Moradi : First author, poyan ali mori : second author
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp.1495-1504, 2013
  60. "On multiple crack detection in beam structures"
    Shapour Moradi : First author, mohamad hasan kargarzadeh : second author
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, pp.47-55, 2013
  61. "Buckling Analysis of Ring-Stiffened Laminated Composite Cylindrical Shells by Fourier-Expansion Based Differential Quadrature Method"
    saeed barani beyranvand : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    Applied mechanics and materials, pp.207-212, 2012
  62. "Failure Analysis of a Drilling Wire Rope"
    Shapour Moradi : First author, khalil Ranjbar : second author, hesam makvandi : Third author
    Journal of Failure Analysis and Prevention, pp.558-566, 2012
  63. "Thermal buckling analysis of shear deformable laminated orthotropic plates by differential quadrature"
    Shapour Moradi : First author, Mohammad Hassan Mansouri : second author
    STEEL AND COMPOSITE STRUCTURES, pp.129-147, 2012
  64. "Vibration of Cracked Plate Using Differential Quadrature Method and Experimental Modal Analysis"
    Shapour Moradi : First author, poyan ali mori : second author
    Journal of Mechanical Research and Application, pp.53-63, 2012
  65. "On the Application of Bees Algorithm to the Problem of Crack Detection of Beam-type Structures"
    Shapour Moradi : First author, Paj Razi : second author, Laleh Fatahi : Third author
    Computers and Structures, pp.2169-2175, 2011
  66. "Finite element model updating using bees algorithm"
    Shapour Moradi : First author, Laleh Fatahi : second author, Pejman Razi : Third author
    Structural and Multidisciplinary Optimization, pp.283-291, 2010
  67. "Drillstring vibration analysis using differential quadrature method"
    Hossen Hakimi : First author, Shapour Moradi : second author
    Journal of Petroleum Science and Engineering, pp.235-242, 2010
  68. "Experimental and computational failure analysis of drillstrings"
    Shapour Moradi : First author, khalil Ranjbar : second author
    Engineering Failure analysis, pp.923-933, 2007
  69. "Application of DQM as an Effective Simulation Tool for Buckling Response of Delaminated Composite Plates"
    ?? taheri : First author, Shapour Moradi : second author
    Composite Structures, pp.439-449, 2001
  70. "A Robuts Methodology for the Simulation of Postbuckling Response of Composite Plates"
    ?? taheri : First author, Shapour Moradi : second author
    Journal of Computational Mechanics, pp.295-301, 2000
  71. "Application of Differential Quadrature Method to the Delamination Buckling of Composite Plates"
    Shapour Moradi : First author, ?? taheri : second author
    International Journal Computers and Structures, pp.615-623, 1999
  72. "Delamination Buckling Analysis of General Laminated Composite by Differential Quadrature Method"
    Shapour Moradi : First author, ?? taheri : second author
    Composite Structures, pp.503-511, 1999
  73. "Postbuckling Analysis of Delaminated Composite Beams by Differential Quadrature Method"
    Shapour Moradi : First author, ?? taheri : second author
    Composite Structures, pp.33-39, 1999
  74. "Differential Quadrature Approach for Delamination Buckling Analysis of Composites with Shear Deformation"
    Shapour Moradi : First author, ?? taheri : second author
    AIAA, pp.1869-1873, 1998

Conference Paper

  1. "Post-Buckling analysis of cracked axially functionally graded beams under compressive uniaxial load"
    Emadodin Sharaf khoram nejhad : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    The 7th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), 2020
  2. "Effect of different distributions of circumferential stiffeners on the buckling load of stiffened composite cylindrical and conical shells of revolution by semi-analytical finite strip method"
    amin abdinipor : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    International Conference on Civil Engineering, Architecture, Development & Reconstruction of Urban Infrastructure in Iran, 2020
  3. "Vibration analysis of a five layer sandwich plate based on first order shear deformation theory"
    mohammad shishesaz : First author, Shapour Moradi : second author, mohammadreza kardouni : Third author
    سومین کنفرانس ملی دانش و فناوری مهندسی برق, کامپیوتر و مکانیک ایران, 2019
  4. "Vibration analysis of amine pump's shaft"
    mahdi atarzadeh : First author, Shapour Moradi : second author, SeyedAlireza SeyedRoknizadeh : Third author
    The 4th National Conference on Mechanical and Aerospace Engineering, 2019
  5. "corrosion behaviour of the 17-4 PH steel in Amine medium"
    Maryam Kahvazi : First author, khalil Ranjbar : second author, Shapour Moradi : Third author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
  6. "buckling analysis of stringer-stiffened cylindrical shell under axial compression"
    فاطمه عيدي زاده : First author, Davood Poorveis : second author, Ali Haghighi : Third author, Shapour Moradi : Fourth author
    4th national conference on civil engineering and architecture with emphasizing the native technology of iran, 2018
  7. "Buckling analysis of cylindrical composite shells with elliptical cross section under the axial pressure using the first order shear deformation theory"
    سحر كردعليوند : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    National Conference on Basic Research in Civil Engineering, Architecture and Urban Planning, 2018
  8. "stress distribution in vehicle bumper composed of sandwich composites with woven face sheet at low velocity"
    مهرنوش كازروني : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    3rd International Conference on Mehanical and Aerospace Engineering, 2018
  9. "Application of DQM in bending and buckling of sandwich panel resting on elastic foundation"
    رضا شیرانی : First author, mohammad shishesaz : second author, Shapour Moradi : Third author
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
  10. "Model Updating of Watermelon Using Experimental Modal Analysis"
    مينا رخشي : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Second International Conference on Mechanical & Aerospace Engineering, 2017
  11. "Repairment and Reconstruction of Lifting Equipments in Drilling Rig"
    Alireza Daneh-Dezfuli : First author, Esmaeil Hajjari : second author, Shapour Moradi : Third author, Seyed Mohsen Sadrossadat Zadeh : Fourth author
    First regional conference on welding and inspection in Khozestan, 2017
  12. "اندازه گیری ارتعاشات پره های توربین با استفاده از مدل دیسک پره دار تحت تحریک مرتبه های روتور به روش زمان بندی نوک پره"
    مسعود نيك پور : First author, Ali Hajnayeb : second author, Shapour Moradi : Third author
    4th National Conference on the Mechanical Systems and Industrial Innovations, 2017
  13. "Crack detection in pressure vessel using modal analysis"
    فرهاد بخشي زاده : First author, Shapour Moradi : second author, Khosro Naderan Tahan : Third author
    Global conference on science and technology of mechanical and electrical engineering of Iran, 2016
  14. "Effect of vibration on the failure of blades in intermediate pressure stage of steam power plant"
    عيسي ايماني گلبوس : First author, Shapour Moradi : second author, mohammad shishesaz : Third author
    Global conference on science and technology of mechanical and electrical engineering of Iran, 2016
  15. "Analysis and discussion of composite materials using first order shear deformation"
    Davood Poorveis : second author, Shapour Moradi : Third author, امين سعادت پور : Presnter
    international conference on civil engineering, 2016
  16. "Buckling analysis of laminated composite elliptical cylindrical shell under partial loading by finite strip method"
    مهشيد صنعتي زاده : First author, Iraj Rasoulan : second author, Davood Poorveis : Third author, Shapour Moradi : Fourth author, narges rafiei : Author 5
    1st National Conference on Composites for Construction Application, 2016
  17. "Buckling analysis of composite shells of revolution resting on elastic foundation under nonuniform lateral loads"
    فاطمه بنابهبهاني : First author, abdola shoaib : second author, Davood Poorveis : Third author, Shapour Moradi : Fourth author
    1st National Conference on Composites for Construction Application, 2016
  18. "Buckling analysis of composite truncated conical shells under axial compressive load using finite strip method"
    Davood Poorveis : second author, Shapour Moradi : Third author, عوده زاده-حسين : Fourth author, روياالسادات اعتمادزاده : Presnter
    1st National Conference on Composites for Construction Application, 2016
  19. "Design of active vibration absorber for piping system"
    مصطفي حسنيان : First author, Shapour Moradi : second author, Afshin Ghanbarzadeh : Third author
    3rd National and First International Conference in Applied Research on Electrical, Mechanical and Mechatronics Engineering, 2016
  20. "Geometrical Effects of Viscoelastic Layer Added to an Elastic Beam on Forced Vibration Response"
    امير علي صادقي : First author, Shapour Moradi : second author
    Fifth international conference on acoustics and vibration, 2015
  21. "buckling of composite cylindrical shell under axial compression by spline finite strip method"
    كركيي-ندا : First author, Davood Poorveis : second author, Shapour Moradi : Third author, narges rafiei : Fourth author
    The 1st national conference of sea-based sustainable development, 2015
  22. "buckling analysis of laminated composite cylindrical panels by spline finite strip method under axial compression"
    خالديان-رضا : First author, Davood Poorveis : second author, Shapour Moradi : Third author, amin khajehdezfuli : Fourth author
    The 1st national conference of sea-based sustainable development, 2015
  23. "buckling of composite cylindrical shells under axial compression by finite strip method"
    عوده زاده-حسين : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    The 1st national conference of sea-based sustainable development, 2015
  24. "Buckling analysis of composite elliptical cylindrical shell by spline finite strip method under axial compression"
    كركيي-ندا : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    First National Conference on Iranian Structural Engineering, 2014
  25. "buckling analysis of laminated composite thin-walled panels by spline finite strip method"
    خالديان-رضا : First author, Davood Poorveis : second author, Shapour Moradi : Third author, amin khajehdezfuli : Fourth author
    First National Conference on Iranian Structural Engineering, 2014
  26. "buckling of composite cylindrical shell under axial compression and lateral pressure by semi-analytical finite strip method"
    عوده زاده-حسين : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    First National Conference on Iranian Structural Engineering, 2014
  27. "Postbucking analysis of multiple cracked beam using differential quadrature element method"
    Peyman Jamshidi Moghadam : First author, Shapour Moradi : second author, vahid tavaf : Third author
    The 22nd annual international conference on mechanical engineering, 2014
  28. "Crack detection in curved beam using differential quadrature element method"
    maryam zarea : First author, Shapour Moradi : second author
    The 22nd Annual International Conference on Mechanical Engineering, 2014
  29. "Crack detection in shell having cracks with finite length"
    vahid tavaf : First author, Shapour Moradi : second author, Peyman Jamshidi Moghadam : Third author, Ali Abyaz : Fourth author
    The 22nd annual international conference on mechanical engineering, 2014
  30. "Crack Propagation in Last Row of a Steam Power Plant"
    reza nasiri : First author, Shapour Moradi : second author
    the first national conference of mechanical engineering of iran, 2014
  31. "Crack Detection in Two-sided Clamped Plate Using One dimensional Wavelet Tansforn"
    saeed lavafeyan : First author, Shapour Moradi : second author
    the first national conference of mechanical engineering of iran, 2014
  32. "determenation of stress distribution due to fiber breakage in a composite material"
    mohammad shishesaz : First author, Shapour Moradi : second author, saeed yaghobi : Third author
    second national conference on mechanical systems and industrial innovations, 2013
  33. "FREE VIBRATION ANALYSIS OF CRACKED POST-BUCKLED BEAM USING DIFFERENTIAL QUADRATURE ELEMENT METHOD"
    zahra poyan : First author, Shapour Moradi : second author
    second national conference on mechanical systems and industrial innovations, 2013
  34. "Free vibration analysis of cracked curved beam using differential quadrature element method"
    maryam zarea : First author, Shapour Moradi : second author
    second national conference on mechanical systems and industrial innovations, 2013
  35. "Modal analysis of turbine blade and the effect of lacing wires failure"
    mahdi fathi : First author, Shapour Moradi : second author
    21st International Conference on Mechanical Engineering, 2013
  36. "bucklling of laminated composite cylindrical shells under follower loads by the finite strip method"
    majid khayat : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    Seventh National Conference on Civil Engineering, 2013
  37. "postbuckling analysis of laminated composite plates under in-plane loads"
    sara izadyar : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    Seventh National Conference on Civil Engineering, 2013
  38. "Computation of natural frequencies of cracked beam using Hilbert-Huang transform"
    mohammad reza gale ban : First author, Shapour Moradi : second author
    21st International Conference on Mechanical Engineering, 2013
  39. "BUCKLING OF STIFFENED LAMINATED COMPOSITE SHELLS OF REVOLUTION UNDER COMBINED AXIAL AND LATERAL LOADINGS WITH DIFFERENT BOUNDARY CONDITIONS BY THE FINITE STRIP METHOD"
    amin abdinipor : First author, Davood Poorveis : second author, Shapour Moradi : Third author
    Seventh National Conference on Civil Engineering, 2013
  40. "Three dimensional simulation of flow and heat transfer in the first stage nozzle of GE-F9"
    MOJTABA ZABIHI : First author, Ebrahim Hajidavalloo : second author, Shapour Moradi : Third author, khalil Ranjbar : Fourth author
    21st International Conference on Mechanical Engineering, 2013
  41. "Vibration analysis of cracked plate using differential quadrature element method"
    omid hoseyni : First author, Shapour Moradi : second author
    Second international conference on acoustic and vibration, 2012
  42. "Crack detection in beams using Hilbert-Huang transform"
    mohammad reza gale ban : First author, Shapour Moradi : second author
    Second international conference on acoustic and vibration, 2012
  43. "Identification of modal parameters of a three degrees of freedom system using operational modal analysis"
    alireza bozorgmehri : First author, Shapour Moradi : second author
    Second international conference on acoustic and vibration, 2012
  44. "Postbuckling analysis of beams using differential quadrature method"
    Peyman Jamshidi Moghadam : First author, Shapour Moradi : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
  45. "Crack detection in beams using wavelet analysis"
    hossein amin pour : First author, Shapour Moradi : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
  46. "Vibration analysis of cracked plate using differential quadrature method and experimental modal analysis"
    poyan ali mori : First author, Shapour Moradi : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
  47. "Vibration analysis of cylindrical shell having a finite length crack"
    vahid tavaf : First author, Shapour Moradi : second author
    20th annual International Iranian Mechanical Engineering Conference, 2012
  48. "Crack detection in beams using differential quadrature element method and artificial bee colony algorithm"
    POOYA RAHMATI : First author, Shapour Moradi : second author
    conference on the mechanical systems simulation, 2012
  49. "Postbuckling analysis of cracked beam using differential quadrature method"
    Peyman Jamshidi Moghadam : First author, Shapour Moradi : second author
    conference on the mechanical systems simulation, 2012
  50. "The effect of vibrations on the failure of steam turbine blades"
    mahdi fathi : First author, Shapour Moradi : second author
    conference on the mechanical systems simulation, 2012
  51. "Analysis of composite shells under hygrothermal loading"
    Mohammad Khorramrooz : First author, Shapour Moradi : second author
    Second National Conference on Mechanical engineering, 2012
  52. "Artificial Neural Network Based Fault Diagnostics of Rolling Element bearings using Continuous Wavelet Transform"
    reza zaeri : First author, Afshin Ghanbarzadeh : second author, bahrooz ataran : Third author, Shapour Moradi : Fourth author
    The 2nd International Conference on Control, Instrumentation and Automation, 2011
  53. "Intelligent Fault Diagnosis of Rolling Bearing Based on Optimized Complementary Capability Features and RBF Neural Network by Using the Bees Algorithm"
    bahrooz ataran : First author, Afshin Ghanbarzadeh : second author, reza zaeri : Third author, Shapour Moradi : Fourth author
    The 2nd International Conference on Control, Instrumentation and Automation, 2011
  54. "Crack detection in cylindrical shell using experimental modal analysis"
    vahid tavaf : First author, Shapour Moradi : second author
    First International conference on Acoustics and Vibration, 2011
  55. "Crack detection in beams using continuous wavelet transform"
    Ali Marashi : First author, Shapour Moradi : second author
    first conference on mechanical engineering, 2011
  56. "Effects of feed water parameters on failure of the steam turbine blades in a power plant"
    khalil Ranjbar : First author, Mohammad Peernia : second author, Shapour Moradi : Third author, Ebrahim Hajidavalloo : Fourth author
    پنجمین همایش مشترک انجمن مهندسین متالورژی ایران و انجمن علمی ریخته گری ایران, 2011
  57. "Crack detection in beams using Bees optimization algorithm"
    mohamad hasan kargarzadeh : First author, Shapour Moradi : second author
    19th annual Conference on Mechanical Engineering, 2011
  58. "Failure assessment of drilling wires"
    Seyed MohammadAli Tayeb zadeh : First author, khalil Ranjbar : second author, Shapour Moradi : Third author, ehsan Makvandi : Fourth author
    11ٰth manufacturing Congress of iran, 2010
  59. "Two Dimensional Ratcheting In Coiled Tubing"
    Mohhamad Jalili : First author, Shapour Moradi : second author
    17th Annual (International) Conference on Mechanical Engineering, 2009
  60. "Updating Finite Element Model of Piping System Using Experimental Modal Analysis"
    Laleh Fatahi : First author, Shapour Moradi : second author, Paj Razi : Third author
    17th Annual (International) Conference on Mechanical Engineering, 2009
  61. "A New Method for Determining Life of a Coiled tubing String"
    Mohhamad Jalili : First author, Shapour Moradi : second author
    17th Annual (International) Conference on Mechanical Engineering, 2009
  62. "Vibration analysis of drillstring by finite element method"
    Mohammad Mehdi Ghalb : First author, Shapour Moradi : second author
    16th anual (international) conference on mechanical engineering, 2008
  63. "Modal and harmonic bending vibration analysis of drillstring"
    Reza Safaie Larki : First author, Shapour Moradi : second author
    16th anual (international) conference on mechanical engineering, 2008
  64. "Drillstring Vibrations Analysis using Finite Element Method"
    Mohammad Mahdighalb : First author, Shapour Moradi : second author
    The 16th international conference on mechanical engineering, 2008
  65. "Axial vibrations of drillstrings"
    Manoochehr Behrooz : First author, Shapour Moradi : second author
    The 2nd National Iranian Petroelum Engineering Congress, 2008
  66. "Postbuckling analysis of composite rectangular plates under static loads by differential quadrature method"
    Mohammad Hasan Mansoori : First author, Shapour Moradi : second author
    پانزدهمین کنفرانس سالانه بین‌المللی مهندسی مکانیک(اردیبهشت‌ماه), 2007
  67. "Boundry Element Shape Optimization in 2-D Elasticity"
    baroze farshi : First author, Shapour Moradi : second author, baroze farshi : Presnter
    ردذ, 1992
  68. "Postbuckling Analysis of Composite Laminated Beams with Multiple Delaminations"
    mehdi taheri : First author, Shapour Moradi : second author
    CAD comp VII, 1971
  69. "Non-destructive Material Identification of a Car Seat Frame Using Experimental Modal Parameters"
    محمد صداقتي : First author, Laleh Fatahi : second author, Shapour Moradi : Third author
    Fourth International Conference On Mechanical Engineering, Materials and Metallurgyّ, 2020
  70. "The Differential Quadrature Element Model Updating of Frames"
    Laleh Fatahi : First author, Shapour Moradi : second author
    21st International Conference on Mechanical Engineering, 2013
  71. "Vibration of cracked plate using differential quadrature method and experimental modal analysis"
    poyan ali mori : First author, Shapour Moradi : second author
    The international conference on experimental solid mechanics and dynamics (X-mach 2012), 2012
  72. "Geometrically Nonlinear Analysis of Anisotropic Laminated Cylindrical Panels with Cut-Out using Spline Finite Strip Method"
    Shapour Moradi : First author, Davood Poorveis : second author, amin khajeh dazfoli : Third author
    World Congress on Advances in Structural Engineering and Mechanics (ASEM 11), 2011
  73. "THE APPLICATION OF BEES ALGORITHM IN FINITE ELEMENT MODEL UPDATING"
    Laleh Fatahi : First author, Shapour Moradi : second author, Paj Razi : Third author
    ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, 2010
  74. "Crack Detection in Structures Using Bees Algorithm"
    Paj Razi : First author, Shapour Moradi : second author, Laleh Fatahi : Third author
    18th annual international conference on mechanical engineering, 2010
  75. "Identification of Cracks in Timoshenko Beams Using Frequency Data"
    Paj Razi : First author, Shapour Moradi : second author, Laleh Fatahi : Third author
    22nd Canadian Congress of Applied Mechanics, 2009
  76. "Updating the FE Model of a Z-shaped Pipeline by Experimental Modal Data"
    Laleh Fatahi : First author, Shapour Moradi : second author, Paj Razi : Third author
    22nd Canadian Congress of Applied Mechanics, 2009
  77. "Estimating the Potential Crack Location in Short Beams Using Experimental Modal Analysis"
    Paj Razi : First author, Shapour Moradi : second author, Laleh Fatahi : Third author
    17th Annual (International) Conference on Mechanical Engineering, 2009
  78. "Application of a simple and Effective Computational Tool for the Complete Assesment of Delamination Buckling and Postbuckling of Composite Beam Plates"
    Shapour Moradi : First author, mehdi taheri : second author
    5th International Conference in Composite Engineering ICCE, 2000
  79. "On Multi Delamination Buckling of Composite Structures"
    mehdi taheri : First author, Shapour Moradi : second author
    12th International Coference on Composite Materials, 1999
  80. "Postbucklling Analysis of Laminated Composite Plates by Differential Quadrature Method"
    Shapour Moradi : First author, mehdi taheri : second author
    'International Conference on Computational Engineering Science ICES, 1998
  81. "Artificial Intelligent Based Fault Location Technique for EHV Series-Compensated Lines"
    Shapour Moradi : First author, Shapour Moradi : Presnter
    'Energy Management & Power Delivery, 1998
  82. "Application of Differential Qvadrature Method to the Analysis of Delaminari on Buckling of Composite Beam-Plates"
    Shapour Moradi : First author, mehdi taheri : second author, Shapour Moradi : Presnter
    'International Conference on Computational Engineering Science ICES, 1997
  83. "BESHOP: A Program package for Shape Optimization in 2-D Elasticity"
    baroze farshi : First author, Shapour Moradi : second author
    '18th Annual ASME Design Automation Coference, 1992