Journal Paper

1. "Investigation of the addition of Methionine on the corrosion of 316L stainless steel fabricated by SLM method in sulfuric acid media"
   محمدحسين رضواني : First author, Mahdi Yeganeh : second author, mohamad lari baghal : Third author
   Eseghlal, pp.19-35, 2022
2. "The Effect Of Microstructural Changes On The Corrosion Properties Of 310s Austenitic Stainless Steel After Thermomechanical Treatment"
   رضا بلوك حيدري : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
   scientific journal of new materials, pp.21-38, 2022
3. "ندارد"
   محمد صالحي : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
   Eseghlal, pp.65-82, 2021
4. "The embedding of doped fluoride PEG in the polypyrrole coating on AZ31 and the investigation of its corrosion behavior"
   Mahdi Yeganeh : First author, Mohammadreza Tavakoli shoushtari : second author, seyed hosein hoseini mortazavi : Third author, Mohsen Saremi : Fourth author
   Journal of Corrosion Sciences and Engineering, pp.7-18, 2020
5. "The Formation of Superhydrophobic Surface on the AZ31 Mg Alloy Using Chemical Immersion Method and The Investigation of Its Corrosion Behavior"
   Mahdi Yeganeh : First author, Niloofar Mohammadi : second author, Mehdi Maraashi : Third author
   Iranian Journal of Surface and Engineering, pp.81-87, 2018
6. "Smart Coatings in anti-corrosion applications: Types and Corrosion Protection Mechanism"
   Mahdi Yeganeh : First author, Mehdi Maraashi : second author, Niloofar Mohammadi : Third author
   Journal of Studied in Color World, pp.29-46, 2017
7. "Effect of Ti content on the microstructure, hardness, wear properties, and corrosion resistance of AlCrCuFeNi high entropy alloy"
   علي رکابي زاده : First author, Mahdi Yeganeh : second author, mohamad lari baghal : Third author
   Materials Today Communications, pp.1-16, 2024
8. "Multi-pass Friction Stir Welding of Al–TiC–Zn–Mg Composite: Microstructure and Mechanical Characteristics"
   Amin Abdollahzadeh : First author, Behrouz Bagheri Vanani : second author, Hamidreza Koohdar : Third author, Amir Aboutalebi Babereh : Fourth author, Mahdi Yeganeh : Author5
   METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, pp.1-23, 2024
9. "Microstructure and corrosion of SLM IN718 in 3.5% NaCl solution at high temperatures"
   Mahdi Yeganeh : First author, سپهر قنواتي : second author, Amin Abdollahzadeh : Third author, Zhao Xiaolin : Fourth author
   Journal of Laser Applications, pp.1-16, 2024
10. "Selective laser melting of Hastelloy-X alloy and cerium oxide reinforced Hastelloy-X composite: Microstructural examination and corrosion behavior"
    khalil Ranjbar : First author, مروه علی حرب : second author, Mahdi Yeganeh : Third author, mohsen reihanian : Fourth author, جاويد ناصري : Author5
    Journal of Materials Research and Technology, pp.7803-7815, 2024
11. "Microstructure and corrosion behavior of Ti-10Cu fabricated by selective laser melting"
    جادر مالحي زاده : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Mehdi Khorasanian : Fourth author
    Materials Today Communications, pp.1-11, 2024
12. "Corrosion performance of an additive manufactured 316L stainless steel in the concrete pore solution"
    Mahdi Yeganeh : First author, محمدحسن شاعري كريمي : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
    international journal of iron and steel society of iran, pp.10-16, 2024
13. "Microstructure evolution, corrosion behavior, and biocompatibility of Ti-6Al-4V alloy manufactured by electron beam melting (EBM) technique"
    Mahdi Yeganeh : First author, Mohammadreza Tavakoli shoushtari : second author, علي طالب خنجر : Third author, Nuha Hadi Jasim Al Hasan : Fourth author
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, pp.1-13, 2023
14. "An investigation on the biological and corrosion response of PEI coating on the AZ31 alloy"
    negin Khoshnod : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Ali Zamanian : Fourth author
    Journal of Coatings Technology and Research, pp.1691-1701, 2023
15. "Inclusions and Segregations in the Selective Laser-Melted Alloys: A Review"
    Mahdi Yeganeh : First author, زهرا شهرياري : second author, علي طالب خنجر : Third author, زينب حاجي زاده : Fourth author, فاطمه شعباني : Author5
    Coatings, pp.1-23, 2023
16. "Microstructure and texture evolutions of 310S austenitic stainless steel after cryogenic rolling and subsequent annealing: X-ray and electron backscatter diffraction studies"
    رضا بلوك حيدري : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    Journal of Central South University, pp.763-785, 2023
17. "The effect of microstructural and texture evolutions during thermomechanical treatment on corrosion resistance of 310s austenitic stainless steel"
    رضا بلوك حيدري : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    Surface Topography: Metrology and Properties, pp.1-16, 2023
18. "Designing a dual barrier-self-healable functional epoxy nano-composite using 2D-carbon based nano-flakes functionalized with active corrosion inhibitors"
    زهرا شهریاری : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author, bahram ramezanzade : Fourth author
    Journal of Materials Research and Technology, pp.2746-2767, 2023
19. "Effects of microstructure and texture after thermomechanical treatments on corrosion behavior of AISI 321 pipeline austenitic stainless steel"
    محمد صالحي : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    Journal of Central South University, pp.3357-3380, 2022
20. "Influence of low temperature heat treatment on microstructure, corrosion resistance and biological performance of 316L stainless steel manufactured by selective laser melting"
    سيدمحمدعلي جزايري مقدس : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
    CIRP Journal of Manufacturing Science and Technology, pp.68-74, 2022
21. "Electrochemical behavior of laser powder bed fusion fabricated 316L stainless steel in a nitric acid solution"
    سحر سليماني بابادي : First author, Mahdi Yeganeh : second author, mohamad lari baghal : Third author
    Journal of Laser Applications, pp.1-12, 2022
22. "Microstructure and corrosion performance of plasma electrolytic oxidation coatings on the surface of conventional and selective laser melted Ti-6Al-4V alloy"
    Mehdi Khorasanian : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author
    Surface Topography: Metrology and Properties, pp.1-12, 2022
23. "Effect of Cold-Rolling and Annealing Treatments on the Microstructure and Mechanical Properties of AISI 309S Austenitic Stainless Steel"
    Moustafa Eskandari : First author, iman khosravi bigdeli : second author, Seyed Reza Alavi zaree : Third author, Mahdi Yeganeh : Fourth author
    Iranian Journal of Materials Forming, pp.52-61, 2022
24. "Enhanced corrosion resistance of 17-4 PH stainless steel fabricated by laser powder bed fusion in H2SO4 solution"
    Mohammadreza Tavakoli shoushtari : First author, Mahdi Yeganeh : second author, داود قاسمي كتكي : Third author
    Journal of Laser Applications, pp.1-13, 2022
25. "Corrosion and the antibacterial response of epoxy coating/drug-loaded mesoporous silica"
    Mahdi Yeganeh : First author, Taher Rabizadeh : second author, Mohammad Sajad Rabii Zade : Third author, Maryam Kahvazi : Fourth author, Hossein Ramezanalizadeh : Author5
    Polymer bulletin, pp.1-19, 2022
26. "The influence of heat treatment on the microstructure and corrosion behavior of selective laser melted 316L stainless steel in Ringer's solution"
    سيدمحمدعلي جزايري مقدس : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
    Surface Topography: Metrology and Properties, pp.1-12, 2022
27. "MoO4 2− -doped oxidative polymerized pyrrole-graphene oxide core-shell structure synthesis and application for dual-barrier & active functional epoxy-coating construction"
    زهرا شهریاری : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author, bahram ramezanzade : Fourth author
    Progress in Organic Coatings, pp.1-22, 2022
28. "Microstructure, corrosion behavior, and biocompatibility of Ti-6Al-4 V alloy fabricated by LPBF and EBM techniques"
    Maryam Kahvazi : First author, Mahdi Yeganeh : second author, Mohammadreza Tavakoli shoushtari : Third author, Hossein Ramezanalizadeh : Fourth author, Farzad Seidi : Author5
    Materials Today Communications, pp.1-12, 2022
29. "Comparison of the microstructure, corrosion resistance, and hardness of 321 and 310s austenitic stainless steels after thermo-mechanical processing"
    محمد صالحي : First author, Mahdi Yeganeh : second author, رضا بلوك حيدري : Third author, Moustafa Eskandari : Fourth author
    Materials Today Communications, pp.1-11, 2022
30. "A comparison between the corrosion behavior of 316L stainless steel manufactured by rolling and laser powder bed fusion in 0.1 M H2SO4 solution"
    Hossein Ramezanalizadeh : First author, Mahdi Yeganeh : second author, محمدحسين رضواني : Third author, mohamad lari baghal : Fourth author
    International Journal of Iron & Steel Society of Iran, pp.47-54, 2022
31. "Characterizations of the Microstructure and Texture of 321 Austenitic Stainless Steel After Cryo-Rolling and Annealing Treatments"
    محمد صالحي : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    Journal of Materials Engineering and Performance, 2022
32. "Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process"
    Sadegh Shahriyari : First author, Mehdi Omidi : second author, Seyyed Ali Hassanzadeh Tabrizi : Third author, Mahdi Yeganeh : Fourth author, Hamid Reza Bakhsheshi-Rad : Author5
    Journal of Advanced Materials and Processing, pp.3-12, 2022
33. "Electrochemical behavior of additively manufactured 316L stainless steel in H2SO4 solution containing methionine as an amino acid"
    Mahdi Yeganeh : First author, محمدحسين رضواني : second author, mohamad lari baghal : Third author
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, pp.1-11, 2021
34. "Corrosion mitigation ability of differently synthesized polypyrrole (PPy-FeCl3 & PPy-APS) conductive polymers modified with Na2MoO4 on mild steel in 3.5% NaCl solution: Comparative study and optimizat"
    زهرا شهریاری : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author, bahram ramezanzade : Fourth author
    Corrosion Science, pp.1-13, 2021
35. "A brief review of the graphene oxide-based polymer nanocomposite coatings: preparation, characterization, and properties"
    زهرا شهریاری : First author, Mahdi Yeganeh : second author, Khalil Gheisari : Third author, bahram ramezanzade : Fourth author
    Journal of Coatings Technology and Research, pp.945-969, 2021
36. "Evaluation of the corrosion performance of selective laser melted 17-4 precipitation hardening stainless steel in Ringer’s solution"
    Mahdi Yeganeh : First author, Mohammadreza Tavakoli shoushtari : second author, پارسا جلالي : Third author
    Journal of Laser Applications, pp.1-13, 2021
37. "Welding and Corrosion Behavior of AISI H13 Welds: The Effect of Filler Metal on the Microstructural evolutions"
    Sadegh Varmaziar : First author, Hossein Mostaan : second author, Mahdi Rafiei : Third author, Mahdi Yeganeh : Fourth author
    Archives of Metallurgy and Materials, pp.839-846, 2021
38. "Corrosion performance of polypyrrole-coated metals: A review of perspectives and recent advances"
    Maryam Kahvazi : First author, Mahdi Yeganeh : second author, Mohammadreza Tavakoli shoushtari : Third author, Amirhossein Esmaeilkhanian : Fourth author
    Synthetic Metals, pp.1-15, 2021
39. "Corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion (L-PBF) in an alkaline solution"
    محمدحسن شاعري كريمي : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
    Optics & Laser Technology, pp.1-10, 2021
40. "Effect of Addition of Silver and Chilled Casting on Corrosion Behavior of AZ91 Magnesium Alloy"
    Mehdi Khorasanian : First author, Mahdi Yeganeh : second author, نويد غلام زاده : Third author, Seyed Reza Alavi zaree : Fourth author
    International Journal of Metalcasting, pp.1184-1196, 2021
41. "Corrosion Inhibition of L-Methionine Amino Acid as a Green Corrosion Inhibitor for Stainless Steel in the H2SO4 Solution"
    Mahdi Yeganeh : First author, iman khosravi bigdeli : second author, Moustafa Eskandari : Third author, Seyed Reza Alavi zaree : Fourth author
    Journal of Materials Engineering and Performance, pp.3983-3994, 2020
42. "Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior"
    Mehdi Omidi : First author, Mahdi Yeganeh : second author, Arash Etemad : Third author, Mohammad reza Rostami : Fourth author, Mohammad esmaeil Shafiei : Author5
    Journal of Advanced Materials and Processing, pp.3-9, 2019
43. "Corrosion behavior of polypyrrole (Ppy) coating modified by polyethylene glycol (PEG) doped ammonium bifluoride on AZ31 magnesium alloy"
    Seyeyd Hossein Hosseini Mortazavi : First author, Mahdi Yeganeh : second author, Arash Etemad : Third author, Mohsen Saremi : Fourth author
    Progress in Organic Coatings, pp.22-32, 2019
44. "Methods for Corrosion Protection of Metals at the Nanoscale"
    Mahdi Yeganeh : First author, Tuan Anh Nguyen : second author
    Kenkyu Journal of Nanotechnology & Nanoscience, pp.37-44, 2019
45. "Application of Mesoporous Silica Containing Benzotriazole in Epoxy Coating Applied to Plain Carbon Steel and Study of Its Corrosion Behavior"
    Mahdi Yeganeh : First author, Mehdi Omidi : second author, Arash Etemad : Third author, Mohammad reza Rostami : Fourth author, Mohammad esmaeil Shafiei : Author5
    Journal of Advanced Materials and Processing, pp.89-97, 2018
46. "An investigation on the corrosion behavior of the epoxy coating embedded with mesoporous silica nanocontainer loaded by sulfamethazine inhibitor"
    Mahdi Yeganeh : First author, Najmeh Asadi : second author, Mehdi Omidi : Third author, Mohammad Mahdavian : Fourth author
    Progress in Organic Coatings, pp.75-81, 2018
47. "High-strain-rate deformation behaviour of new high-Mn austenitic steel during impact shock-loading"
    Moustafa Eskandari : First author, Mohammad Mohtadi-Bonab : second author, Mahdi Yeganeh : Third author, Jerzy A. Szpunar : Fourth author, Akindele G. Odeshi : Author5
    Materials Science and Technology, 2018
48. "Anti-corrosion behavior of epoxy composite coatings containing molybdateloaded mesoporous silica"
    Mahdi Yeganeh : First author, Mehdi Omidi : second author, Taher Rabizadeh : Third author
    Progress in Organic Coatings, pp.18-27, 2018
49. "Superhydrophobic Surface of AZ31 Alloy Fabricated by Chemical Treatment in the NiSO4 Solution"
    Mahdi Yeganeh : First author, Mehdi Omidi : second author, Moustafa Eskandari : Third author
    Journal of Materials Engineering and Performance, pp.3951-3960, 2018
50. "Smart Corrosion Inhibition of Mild Steel Using Mesoporous Silica Nanocontainers Loaded with Molybdate"
    Mahdi Yeganeh : First author, Mehdi Maraashi : second author, Niloofar Mohammadi : Third author
    International Journal of Nanoscience and Nanotechnology, pp.143-151, 2018
51. "Superhydrophobic surface of Mg alloys: A review"
    Mahdi Yeganeh : First author, Niloofar Mohammadi : second author
    Journal of Magnesium and Alloys, pp.59-70, 2018
52. "Application of mesoporous silica nanocontainers as an intelligent host of molybdate corrosion inhibitor embedded in the epoxy coated steel"
    Ahmad Keyvani : First author, Mahdi Yeganeh : second author, Hamid Rezaeyan : Third author
    Progress in Natural Science: Materials International, 2017
53. "A Comparison Between Corrosion Behaviors of Fine-Grained and Coarse-Grained Structures of High-Mn Steel in NaCl Solution"
    Mahdi Yeganeh : First author, Moustafa Eskandari : second author, Seyed Reza Alavi zaree : Third author
    Journal of Materials Engineering and Performance, pp.2482-2490, 2017
54. "Electrodeposition of Zn-Co-Mo Alloy on the Steel Substrate from Citrate Bath and Its Corrosion Behavior in the Chloride Media"
    Ahmad Keyvani : First author, Mahdi Yeganeh : second author, Hamid Rezaeyan : Third author
    Journal of Materials Engineering and Performance, pp.1958-1966, 2017
55. "Electrochemical behavior of polypyrrole-coated AZ31 alloy modified by fluoride anions"
    Maryam Hatami : First author, Mahdi Yeganeh : second author, Ahmad Keyvani : Third author, Mohsen Saremi : Fourth author, Reza Naderi : Author5
    Journal of Solid State Electrochemistry, pp.777-785, 2017

Conference Paper

1. "ندارد"
   جادر مالحي زاده : First author, Seyed Reza Alavi zaree : second author, Mahdi Yeganeh : Third author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
2. "ندارد"
   محمدمهدي روحاني نژاد : First author, Mahdi Yeganeh : second author, Mohammadreza Tavakoli shoushtari : Third author, Seyed Reza Alavi zaree : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
3. "ندارد"
   Mohammad Sajad Rabii Zade : First author, Mahdi Yeganeh : second author, ميثم سعادت بخش : Third author, زينب حاجي زاده : Fourth author
   3rd International Conference & 7th National Conference on Materials, Metallurgy, Mining, 2024
4. "The effect of heat input on the microstructure and wear behavior of duplex stainless steel weld overlay applied to A283 carbon steel by GTAW method"
   پريسا احمدي : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author, Mehdi Khorasanian : Fourth author
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
5. "تغییرات ریزساختاری در روکشهای جوشی فولاد زنگ نزن دوفازی روی فولاد ساده کربنی تحت تاثیر اعمال لرزش الکترومغناطیس"
   محمد رخش ماه : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
6. "تاثیر اعمال لرزش الکترومغناطیسی همزمان با جوشکاری بر رفتار فرسایشی روکش فولاد زنگ نزن دوفازی روی فولاد ساده کربنی"
   محمد رخش ماه : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author
   5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT & 1st National Conference on Additive Manufacturing, 2023
7. "اثر لرزش الکترومغناطیسی بر چسبندگی روکش فولاد زنگ نزن دوفازی به فولاد ساده کربنی"
   محمد رخش ماه : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
8. "ندارد"
   yosef Heidari : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
9. "اثر لرزش الکترومغناطیسی بر رفتار سایشی روکش فولاد زنگ نزن دوفازی روی فولاد ساده کربنی"
   محمد رخش ماه : First author, Reza Dehmalaie : second author, Mahdi Yeganeh : Third author
   2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
10. "Effect of B4C nanoparticle on microstructure and properties of IN625 cladded by PTA process"
    مهدي حاجي زاده : First author, behnam lotfi : second author, Mahdi Yeganeh : Third author
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
11. "تاثیر حرارت ورودی بر ریزساختار و تغییرات سختی در روکش جوشی فولاد زنگ نزن روی فولاد ساده کربنی با روش GTAW"
    پريسا احمدي : First author, Reza Dehmalaie : second author, Mehdi Khorasanian : Third author, Mahdi Yeganeh : Fourth author
    2nd International Conference & 6th National Conference on Materials, Metallurgy, Mining, 2023
12. "ندارد"
    علي حيدري کاه کش : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author
    5th national conference on materials,metallurgy and mining, 2022
13. "ندارد"
    محمد احمدرضايي : First author, علي حيدري کاه کش : second author, Mahdi Yeganeh : Third author, Khalil Gheisari : Fourth author
    5th national conference on materials,metallurgy and mining, 2022
14. "ندارد"
    محمد احمدرضايي : First author, Mahdi Yeganeh : second author, Khalil Gheisari : Third author
    5th national conference on materials,metallurgy and mining, 2022
15. "تأثیر مبردگذاری و افزودن عنصر نقره بر ریزساختار و خواص خوردگی آلیاژ منیزیم AZ91"
    نويد غلام زاده : First author, Mehdi Khorasanian : second author, Mahdi Yeganeh : Third author, Seyed Reza Alavi zaree : Fourth author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
16. "ندارد"
    سيدمحمدعلي جزايري مقدس : First author, Seyed Reza Alavi zaree : second author, Mahdi Yeganeh : Third author, Moustafa Eskandari : Fourth author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
17. "ندارد"
    زهرا شهریاری : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author, bahram ramezanzade : Fourth author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
18. "ندارد"
    محمدحسين رضواني : First author, Mahdi Yeganeh : second author, mohamad lari baghal : Third author
    1st International Conference & 4th National Conference on Materials, Metallurgy & Mining, 2021
19. "ندارد"
    محمدحسن شاعري كريمي : First author, Mahdi Yeganeh : second author, Seyed Reza Alavi zaree : Third author, Moustafa Eskandari : Fourth author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
20. "ندارد"
    سيدمحمدعلي جزايري مقدس : First author, Seyed Reza Alavi zaree : second author, Mahdi Yeganeh : Third author, Moustafa Eskandari : Fourth author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
21. "ندارد"
    رضا بلوك حيدري : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
22. "ندارد"
    محمد صالحي : First author, Moustafa Eskandari : second author, Mahdi Yeganeh : Third author
    3rd National Conference on Materials Engineering, Metallurgy, 2020
23. "The Effect of Cold Rolling and Annealed treatments on the microstructure, mechanical properties ofAISI 309S austenitic stainless steel"
    iman khosravi bigdeli : First author, Seyed Reza Alavi zaree : second author, Moustafa Eskandari : Third author, Mahdi Yeganeh : Fourth author
    Second National Conference on Materials Engineering, Metallurgy and Mine, 2019
24. "The effect of annealing time and temperature on the corrosion properties of cold rolled AISI 309S"
    iman khosravi bigdeli : First author, Moustafa Eskandari : second author, Seyed Reza Alavi zaree : Third author, Mahdi Yeganeh : Fourth author
    IMAT 2018, 2018
25. "The application of mesoporous nancontainers in order to smart inhibition of carbon steel corrosion"
    Mahdi Yeganeh : First author, Ali Saremi : second author
    2nd National Conference of Nanoscience & Nanotechnology, 2018
26. "Application of MoO4 2− modified GO for enhanced corrosion resistance of epoxy coating"
    زهرا شهریاری : First author, Khalil Gheisari : second author, Mahdi Yeganeh : Third author, bahram ramezanzade : Fourth author
    The 8th International Color & Coating Congress, 2021